Originally Posted by dart16
Well I don't know how much you know do I?
Your router appears to have a single host port so if you want to run both your PC with the Marvel Yukon gigabit NIC and your tablet together you are going to be disappointed. Your picture of the PC's NIC properties page would tend to disagree with your findings as it obtained a lease from a DHCP server so the PC network card is set to DHCP (check it).
If I'm wrong in all this then you should follow the video you have already seen to set a static IP in the tablet, choose the same IP as the PC because you cant run them both together. To find out what your PC's IP details are open a cmd prompt (start, run and type cmd, then press enter) then type ipconfig /all, note IP address, subnet mask, gateway and dns server addresses and enter them in your tablet.
. I did set it up. It turns out that I did get a connection the first time I set the static IP on the tablet, but the real problem is that I can't get internet :/. Let me explain.
I've connected the tablet with my modem and I can go to it's setup page via browser and everything is working properly there, but when I try google.com or any other site it can't get through. Page not available.
What do you think is the problem? Maybe Tim6a rom I flashed, but i doubt it?
EDIT: The only solution for this cable modem is a router.