not able to flash while selecting all files of stock rom.. :/
i have to de-select Preloader.. nd below that ....
plzzzz help, i am able to flash modified boot image nd cwm....
tell me if something can be via that....
for everyone's notice i bricked my phone by formatting whole rom.... ( by mistake)
bt now when i intentially try that,... error comes... !! WTF
"s_brom_cmd_startcmd_fail (2005)"
Brick ur device then format ur phone 3 times select one option each time before format load stock rom scatter file after that try firmware upgrade and then try download
can u explain more in detail.. also am not able to format either....
"s_brom_cmd_startcmd_fail (2005)"
i used adb... nd came to know that my phone don't have anything in it..
no /system folder, etc etc...
becoz of that not able to pust anything into phone rom..
if u have CWM recovery installed and working.
U must install update.zip given above or stock rom directly.
Is it possible for you?
Tell me is CWM recovery installed and even working?
some1 then provide rooted Backup of ROM
and this people will directly paste in SD card and use restore.
when i unselect PRELOADER and DSP_BL, nd select " disable DA download all"
it shows countdown timer, and i am able to flash those files, if i don't select " disable DA download all" it don't show countdown and it shows same error below......
bt when is select all files... it does not show countdown in any state, i think thats why i can't flash stock rom...
is it any help in solving my problem to anyone ??
its been 3 days since my phone is bricked...
i again quote that in can use cwm nd my phone can show battery charging... after i flash all files except "Preloader and DSP_DL"...
will nandroid back help me or any other backup....
will if yes then plzz someone upload it.. as i don't have anything on my side except stock rom and "stock rom modified" bt it hangs while update.. or show error whether i try many times.
help help help... coz now am frustated..
or can i go to micromax centre.. nd give excuse of some virus..
would that work ??
if u have CWM recovery installed and working.
U must install update.zip given above or stock rom directly.
Is it possible for you?
Tell me is CWM recovery installed and even working?
some1 then provide rooted Backup of ROM
and this people will directly paste in SD card and use restore.
well i tried using "update from sdcard"
i had "stock rom modified.zip" which was uploaded by vaibhav to help someone...
it starts installing and then hangs saying "installing jellyboom"... or it shows error..
can anyone provide me with "stock rom.zip" which can be used with cwm to unbrick my phone.
also the method to install it.
is "stock rom.zip" available on ftp micromax server is the one i need coz i already had that one ... bt i can;t use it with cwm.. till now.
@ADI u dont have to disable da download option try without disablling da download when u click download button it will show searching then connect ur phone to pc
Last edited by Abhii1902; February 16th, 2013 at 07:31 PM.
@ADI u dont have to disable da download option try without disablling da download when u click download button it will show searching then connect ur phone to pc
abhii can u provide me with the nandroid backup of stock rom or anything, i guess that would help me alot.
plzzz help anyone, i have started giving up already...
will it help, if a take the phone to market and get it flashed with flashing devices they have....
will this error pop up there too ??
"s_brom_cmd_startcmd_fail (2005)"
try update.zip Which is basically stock rom with ROOTed superuser
Its already provided by vaibhav. or wait till my 12th gets over i will upload whole backup which i already have!
use CWM for update.zip tell me is it working or not?
try update.zip Which is basically stock rom with ROOTed superuser
Its already provided by vaibhav. or wait till my 12th gets over i will upload whole backup which i already have!
use CWM for update.zip tell me is it working or not?
problem is i have formatted whole rom..( kind of bcoz it wasn't fully completed);
so i need Preloader nd DSP_BL to be flashed into phone or nothing will work..
today i was successful in installing "stock rom modified" given by vaibhav thru cwm... it showed installed... bt when i rebooted.... it was same as before..
i couldn't get past splash screen( micromax logo).. :/
Strange try visiting micromax center if they can help
If you get any installation error in installing STOCKROM.zip provided by mmx ftp server through CWM
tell me or try replacing META-INF folder basically.
just extract and replace meta-inf folder and compress again. Your good to go.
tell me did it worked?
problem is i have formatted whole rom..( kind of bcoz it wasn't fully completed);
so i need Preloader nd DSP_BL to be flashed into phone or nothing will work..
today i was successful in installing "stock rom modified" given by vaibhav thru cwm... it showed installed... bt when i rebooted.... it was same as before..
i couldn't get past splash screen( micromax logo).. :/
dude did u hv followed my instructions to flash rom...well if not here they goes...
1) wipe data and cache partition
2) wipe cache partition
3) go to advance menu and wipe davlik cache
4) go back and select mount and restore the format data, format cache and format system
5) go back and select install zip from sd card
6) select choose zip from sd card
7) selcet the zip file downloaded above and select yes..if it asks yes 2 times the just click on yes and it will be flashed..
8) fix permission from advanced menu
9) ur phone will take upto 5 minutes to boot first time...this is because the system prepares the davlik cache...
__________________
I think hitting the Thanks button if I helped you is not a Crime.
Smash The Thanks Button if you Liked it Donations Are Appretiated To donate PM me
dude did u hv followed my instructions to flash rom...well if not here they goes...
1) wipe data and cache partition
2) wipe cache partition
3) go to advance menu and wipe davlik cache
4) go back and select mount and restore the format data, format cache and format system
5) go back and select install zip from sd card
6) select choose zip from sd card
7) selcet the zip file downloaded above and select yes..if it asks yes 2 times the just click on yes and it will be flashed..
8) fix permission from advanced menu
9) ur phone will take upto 5 minutes to boot first time...this is because the system prepares the davlik cache...
i did same... it installed bt still stuck at boot screen.. kept phone on that for abt 30 mins.
Strange try visiting micromax center if they can help
If you get any installation error in installing STOCKROM.zip provided by mmx ftp server through CWM
tell me or try replacing META-INF folder basically.
just extract and replace meta-inf folder and compress again. Your good to go.
tell me did it worked?
i don't get u, stock rom.zip provided by ftp server can't be flashed thru cwm, i guess...
don't it need to be flashed thru sp flash tool after extraction.. ??? :O
also it doesn't contain any META-INF folder.. accurately there is no folder..
Infinite thanks to mistermind finally i rooted my mmx smart a25................ Its really easy just pay attention to each step and u need to do nothing extra apart from these steps........
Infinite thanks to mistermind finally i rooted my mmx smart a25................ Its really easy just pay attention to each step and u need to do nothing extra apart from these steps........
if u wanna thanks mastermind, then plzz provide me with complete rom dump of your phone..
adi try this: download mastermind scatte file then open it in notepad after that remove everything in it then copy and paste this
{
}
RECOVERY 0xFC0000
{
}
save scatter file keep this scatter file with cmw recovery img vaibhav provided then open sp flash tool select this scatter file if it sp show any error ignore it after that disable da download and click download after doing this ur phone will not power on after that remove battery from ur phone and connect it to ur pc and see ur pc is able to detect it or not after that select scatter file provided in stock rom file keep everthing tick keep da download enabled after that click firmware upgrade if it show error dissconect ur phone from pc then click download and connect ur phone to pc
Last edited by Abhii1902; February 19th, 2013 at 07:31 AM.
adi try this: download mastermind scatte file then open it in notepad after that remove everything in it then copy and paste this
{
}
RECOVERY 0xFC0000
{
}
save scatter file keep this scatter file with cmw recovery img vaibhav provided then open sp flash tool select this scatter file if it sp show any error ignore it after that disable da download and click download after doing this ur phone will not power on after that remove battery from ur phone and connect it to ur pc and see ur pc is able to detect it or not after that select scatter file provided in stock rom file keep everthing tick keep da download enabled after that click firmware upgrade if it show error dissconect ur phone from pc then click download and connect ur phone to pc
it doesn't work now either... sp flash tool hangs nd then when i remove battery while its hanged, it shows all images have benn locked... :/
same for flashing system.img.. it is also been locked... don't know the mess i have created for myself....
new update from my side....
i was able to flash stockrom someshow.... including Preloader nd DSP_DA..
now i pushed power button; it showed same splash screen bt it was limit, then phone reboots nd i was redirected to stock recovery where nothing happens...
so i flashed "modified boot.img" by mastermind, then flashed "cwm recovery.img" by vaibhav...
then.....
followed vaibhav's instructions to flash rom...
1) wipe data and cache partition
2) wipe cache partition
3) go to advance menu and wipe davlik cache
4) go back and select mount and restore the format data, format cache and format system
5) go back and select install zip from sd card
6) select choose zip from sd card
7) selcet the zip file downloaded above and select yes..if it asks yes 2 times the just click on yes and it will be flashed..
8) fix permission from advanced menu
9) ur phone will take upto 5 minutes to boot first time...this is because the system prepares the davlik cache...
bt still stuck at splash screen... any suggestion or help ??
am getting gud at "flashing stock rom"
this is the 2nd time i got successful; plzzz someone tell me wht to do now
nd i will explain the reasons behind some common errors people face....
which i have experienced all in this hell of week.. :/
how to start my phone now ??
how to get past splash screen, how much time it takes for 1st boot after flashing stock rom ??
Last edited by Aditya Thakur; February 19th, 2013 at 10:15 AM.
Dont know about this one!
it usually takes 3 minute to strt up after installing
as same error occurs everytime after flashing and installing
trying going to mmx center?
so in the end i will have to visit mmx centre .. :P
can u tell me if they would charge for repairing phone or not;
it only 2 weeks old..
nd if they charge, then how much ?
Last edited by Aditya Thakur; February 20th, 2013 at 07:55 AM.
Many possibilites
They wont repair your phone becuase you bricked it yourself
Will physical bill u have warrnty if u make them fools they might replace it
Or they will charge a lot :P :P
Guys I hv ported micromax A52 rom to Micromax A25...with functions like 3G and GPS...gonna make a try..all things are working fine except bluetooth and wifi...will try to fix them..and if all things will be working fine i will post it here...
Many possibilites
They wont repair your phone becuase you bricked it yourself
Will physical bill u have warrnty if u make them fools they might replace it
Or they will charge a lot :P :P
well i have submitted my phone to them today by making some excuse...
nd they accepted it in warranty.
lets see what comes next.
but i am angry nd sad that no one of u was able to help me...
anyways thanks for your time guys.
well i have submitted my phone to them today by making some excuse...
nd they accepted it in warranty.
lets see what comes next.
but i am angry nd sad that no one of u was able to help me...
anyways thanks for your time guys.
within 4 hrs, they have fixed my phone.
and requested me to collect it...
should i try rooting it again ??
bt this time if something wrong happens, they are surely gonna know wht am i doing..
Last edited by Aditya Thakur; February 21st, 2013 at 07:33 AM.
Aditya Enjoy
Ofcourse you should root it! As all of us did. But follow the steps and i did on windows 7 with drivers working and dont change scatter file it bricks the phone.
sometimes it gives error but try it once again and your phone will be rooted.
Got error for USB mass driver so did first with superOneclick and got my drivers and then finally Rooted with unlockroot.
keep njoying chainfire3d,superuser,reverse tethering and all
vaibhav Cool bro that you have ported ROM
try to fix main wifi and bluetooth as people prefer it more.
Great effort Professional
within 4 hrs, they have fixed my phone.
and requested me to collect it...
should i try rooting it again ??
bt this time if something wrong happens, they are surely gonna know wht am i doing..
lol at micromax service centre... they said thet fixed my micromax bt when i went to recieve it, it was same as before...
they also had flashed it like i did..
now they are saying that it has to be sent to factory nd can take upto 10 days...
wtf...
hey guys i unbricked my brothers bricked mmx a25 after that it showed invalid imei and so i searched through internet and replaced my imei file mpob001 now its showing my imei after pressing *#06# but cannot connect to network can any one help plsssssssss
also i have one important news about mmx a25
if u or any one bricked your mmx a25 then dont or i will say never use any others mmx a25 cwm backup file cuz i have done it and all my bluetooth id,wifi id was lost, but thanks that i was havng the backup of that phone too so dont upload any backup for any one cuz its of no use instead flash stock rom uploaded in this thread and plsss help me getting fixed my network problem
also i have one important news about mmx a25
if u or any one bricked your mmx a25 then dont or i will say never use any others mmx a25 cwm backup file cuz i have done it and all my bluetooth id,wifi id was lost, but thanks that i was havng the backup of that phone too so dont upload any backup for any one cuz its of no use instead flash stock rom uploaded in this thread and plsss help me getting fixed my network problem
hey guys i unbricked my brothers bricked mmx a25 after that it showed invalid imei and so i searched through internet and replaced my imei file mpob001 now its showing my imei after pressing *#06# but cannot connect to network can any one help plsssssssss
it not lyk that, u need to reinsert your imei ( displayed on your phone ) thru mmx imei software available on their ftp site....
it will automatically correct your wifi nd bt problem too.
Please help me guys i rooted my MMX A25 succesfully.... however without taking back uo of my stock ROM i installed beats audio and after that the default music player force closes when i use the sound effect option which is not working due to beats audio replaced the drivers from root folder i formatted the fone yet the music soudeffect drivers are permanently replaced..... i need my stock music player working fully and properly please help.......
easyrobb how u rooted plz help me I tried via unlockroot3.1 but its saying mt65xx preloader not installed but I installed A25 driver over the internet via adb installer and no problem in device manager...plz help me......and sp flash tool work only in administrative mode??? becozz I open with 2x click not as administrator.n when I opened scatter file n getting error to load scattered file.
Last edited by Ajaycool807; February 25th, 2013 at 07:33 AM.
Device(s): HTC Incredible 2
Samsung Galaxy S
Samsung omnia w
Samsung galaxy pro
Micromax A73
Carrier: Not Provided
Thanks: 6
Thanked 2 Times in 1 Post
I am unable to flash anything on A25 from sp flash tool. I have used this software on many phones but whenever i connect A25, it starts charging. i tried many times but same result.
ERROR is:
BROM ERROR: S_BROM_CMD_FAIL (2005)
can anybody give me nandroid backup or flashable rom zip file which can be flashed via cwm?
Last edited by drsparsh; February 25th, 2013 at 01:11 PM.
after I have selected the scatter and boot.img file and clicked on download, I connected the phone. But I get an error message saying that BROM cannot be passed over usb...
I also disable da download all from option.....!!!!!
But there were Error....
Plzzz...... do something......
I think there were mistake in DRIVER installtion.....!!!!
plz clearly say me how & which driver install in my pc with image or detail Tutorials....
Thanx in Advance....
I attached images....
Last edited by Sannytkp; February 28th, 2013 at 12:00 AM.
@Sannytkp
If it shows error related to DRIVERS NOT INSTALLED instead you have installed the drivers then do this
turn off your a25 and remove battery then go to device manager of your pc insert usb cable of your a25 in switched off state in device manager it will show mtk preloder click on that and install driver manually (install usb vcom driver {Available on Micromax Website}) now try to flash it will not show error.
24Likes
WTF
To donate PM me
