siguetea

its been three days almost every hour I visited aayush site , just to check whether the CeltICS v1.1 released or not, but its not yet released until now, so while waiting for the v1.1 released, then I browsing around to kaskus and found this posted by kujang_1
the link contain the scatter file from Mito, new rom of Gionee and new rom of IQ270. I have try flashing the roms using SP Flash Tool, and I got larger space for internal memory (233 MB), 5 MP camera with no bugs, support ext2 (I also have try this), wifi works fine (tested using connectify), I haven't tested the other function, and about the UI, its standard, and the launcher is using Sony Xperia.
Unfortunately the scatter file from mito is not work when flashing the recovery by varun, hope somebody can develop the recovery to make it work with scatter file from mito.
the rom IQ270 also has been cleaned up by kujang_1, its to make the rom can be recognized by the scatter file.

Method : extract the Gionee rom and then replace the system.img with the system.img from IQ270 and replace the scatter file with scatter file from mito then flash using SP Flash Tool

here is the download links :
scatter mito
GN105_T39_C
Root_and_Clean_FLyIQ270

credit goes to kujang_1 from kaskus

Last edited by siguetea; July 5th, 2012 at 08:47 PM.

aayushdutta

Bro, as far as I know, The scatter file is just a Memory Heap Definition (MHD) file which tells the SP Flash Program, that in which section/memory heap of the NAND a particular file has to be put. It does not deal with increasing the Internal Memory capacity.

As you've said in your OP that we must replace the stock system.img with that gionee system.img, so the trick which made the space go larger was the APPS Data Section growing smaller. As the APPS released the memory being used by them. The space increased just showing 181Mb Free!

Hope I was correct, any objections to this theory are most welcome....

__________________
Because You're One of a Kind!

My ROM's: Blue Terror™ | A75v3 - Reloaded | CeltICS | My Other ROM's

bara3239

Its great ... It really works ...used it all day long .. no issue yet, not a single application crashed yet

saivignesh

@aayush I got 233mb free space when i used mitto scatter
when I used the same system.img with mmx scatter it fallen back to 158mb

Last edited by saivignesh; July 6th, 2012 at 11:00 AM.

siguetea

I'm not really sure too that the scatter file will take effect to internal memory capacity, but based on my experience, when I first bought Mito phone, I noticed that the total internal memory is 233mb, but when I flash my phone using rooted UB_A75 by ninad the internal memory decrease to 168mb.
I also have try flashing several rom with default scatter file that come with the rom and the result is the total internal memory no more than 170mb, if I'm not forget, the gionee rom has 170mb internal memory, and UB_A75 168mb.
but when I try the scatter file from mito the total internal memory increase to 233mb.
233mb is the total internal memory, if you see the scshot on OP 181mb is the free space after I install many apps, but you can see that there the used space 52mb so total is 233mb.
if you try the roms on OP, when on fresh flash you will get 217mb free space and 15mb used space.
Bro, I'm not a developer but hope this information will help you to build more great rom.

saivignesh

@siguetea have u got 168mb free space with ub rom?
surprise
coz my internal memory after flashing ub-1 is about 110mb

siguetea

I mean 168mb is for total internal memory (free and used) when using ub, not free space.

saivignesh

ok I am gonna try silverlight rom with these files

mastermind's recovery works fine for me

try that

bara3239

I tried the following:
1. Installed Link2SD
2. Flashed the recovery by varun- Successfully done
3. Created Partition- Ext2 using recovery[1 GB]- Successfully done
4. Opened Link2SD -> Mounted Partition-> Reboot Phone
5. You r DONE....
Enjoy the extra space
233MB on Internal and 1GB as Ext2

Friends Tried it out

siguetea

@saivignesh & bara3239 : guys, are you sure that both varun and mastermind recovery works fine?
I have try two times install the recovery, its works for the first time but then my phone dead after several reboot, so I need the format + download method using SP flash tool to make it back on.. please confirm..

saivignesh

wow finally I have bricked my device
"deader than elvis"
anyway format+download. option worked fine


best tool to write imei?
I have done that via anarchy rom engineering mode
any other tool?

@siguetea. yes u r right recovery murdered my a75

kujang

Use terminal emulator or adb shell

echo 'AT+EGMR=1,7,"your imei 1"' >/dev/pttycmd1
echo 'AT+EGMR=1,10,"your imei 2"' >/dev/pttycmd1

No need any tool

bara3239

hi siguetea,

Follow the steps

1. Flash using the default recovery as provided in the GN105 folder

a. just replace the scatter file with Mito scatter file
b. System.img with the system.img from the Root_and_Clean_FLyIQ270 folder

2. Boot the phone -> Let the phone boot and wait it home screen is displayed
3. Switch off the phone
4. Flash using Varun's recovery
5. Start the phone

That's it

Last edited by bara3239; July 7th, 2012 at 02:52 AM.

varun.chitre15

Lolz...why you guys are using SP flash tool to flash recovery.
Use the 'Safest method' I posted, it wont harm your A75 101% sure

__________________
Found a Abusive/Spam post? Hit button
Found a useful post? Hit button
Found a post required to be featured? Hit button

saivignesh

lol I dont even knew about that method
gonna try that

saivignesh

lolzzzzzz omg omg
I again bricked my a75
varun I followed that method to install recovery
everything worked fine but when I installed zip from cwm
splash. my phone is dead
and again format+download. worked fine


@varun pls develop cwm for gionee img files

avinashmeena

which sp tool version you are using my version does't respond on format+download option

saivignesh

bro at first attempt it will not work
then u got to remove the battery and reinsert it again
now click on format+download it will and should work
tried 3 times

avinashmeena

Which os you are using

saivignesh

win xp. and it should also on work win7

Last edited by saivignesh; July 7th, 2012 at 12:46 PM.

bara3239

Issues Faced:
1. Internet via SIM not working -the devices does not display the neither H or E sign

Any Solution Guys

saivignesh

lol !!u got u add apn
access point names
THERE IS NOT EVEN A SINGLE ISSUE IN THIS ROM

bara3239

This is really a very good ROM....

siguetea

Guys, I just wanna share that Mito now has CWM, it will work with scatter file from mito that has larger internal memory.
but be carefull this cwm will not work when flashing using rom that using boot.img from mmx.
I have try flash Blue Terror rom with this mito cwm, and the result is its stuck on boot logo, but then I try the newbie way , replacing the blue terror boot.img file with boot.img file from Gionee or Mito then the result is ITS WORKS!, now I have Blue Terror rom using Mito scatter file.

Note : I have try this cwm recovery file using mmx firmware and its stuck on boot, but its works fine with Gionee firmware, maybe its because of boot.img on both firmware recognized different by the cwm recovery file.

here is the link : recovery.img - 4shared.com - online file sharing and storage - download

Thanks to :
- kujang and sangsaka (from kaskus) for providing cwm mito
- aayushdutta for great amazing rom

Last edited by siguetea; July 31st, 2012 at 11:25 PM.

saivignesh

thanks alot
1000 thanks

shahabazas

Hey mate have u tried this if yes then please let me know how to use it so that i can have the Blue Terror ROM with the increased internal memory so please let me know the steps to use it please. N haan please also provide d files need which I need to use for this method.

__________________
As thought, followed and said by meeeeeee...
Dream the best and do the best, because if you do the best you always deserve the best.

saivignesh

download GN105_T39_C
mito scatter
recovery.img
from this thread
extract that GN105_T39_C file
replace recovery.img
and scatter file
open sp flash tool and select mito scatter
then flash
install blue terror from cwm

NOTE:ONLY USE THIS RECOVERY.IMG OTHERWISE
UR DEVICE WILL BE BRICKED
recovery.img - 4shared.com - online file sharing and storage - download

if boot looped after installation of blue terror
install gionee boot.img
coz aayush has included boot.img in his rom

shahabazas

Have u tried it bro??? Hey buddy can u just provide d mito boot img n mito scatter file as if otherwise need to download the whole folder n I m on mobile internet so if u can provide just the boot image n scatter file will download them n will just flash it over the Blue Terror ROM.

saivignesh

it cant work that way
u got to download the whole gionee rom
otherwise sp flash tool will show error
"partition size changed"

I am too on mobile internet

shahabazas

Bro I have flashed my both A75 n A73 like this only I got d error when I start sp flash tool of other file not present but it works fine. Oh wait are y asking me to flash this ROM first n then I need to install Blue Terror or what???

saivignesh

u cant flash that way yaar
mito scatter installs system on different partition
so if u want more internal memory
u got to use mito scatter on gionee rom only

I have tried different things and bricked my device about 25 times

mastermind1024

Scatter file tells sp flash tools what to put where on nand flash(in which sectors).
So in theory u can modify ur scatter file to resize any partition but practically it will not work on device because that new information of scatter has to be put in kernel too...so if u use mito scatter with mmx boot.img then result is bricked device....
Why that works with gionee boot.img n mito.img, because their kernel has the info related to that scatter file...

@saivignesh
I hv checked that scatter, it has a change only in system n data partition addresses...
so my question is, during flash which files to be flashed, means do i need to flash all files or only boot.img(gionee or mito), system.img(any below 200mb may be,depends on new system partition size) n optionally recovery(new one above)...

__________________
To born free is an accident, To live free is privilege, But To die free is responsibility...

saivignesh

I have already mentioned that
if u select mito scatter
sp flash tool wont allow u to flash any single. img
it shows error "partition size changed all the files should be flashed"

hence I think sp flash tool reads ur phones partition b4 flashing

shahabazas

So i need to first downlaod the GN105_T39_C, mito scatter, recovery.img and have to flash them via sp flash tool and then can falsh Blue Terror correct and have you tried it or anyone else have tried it please let me know...

saivignesh

I tried it
and I am on that only

siguetea

yes you can try saivignesh method, or you can try what I've done, after flashing via Sp flash tool, on your PC extract the blue terror zip file first, replace boot.img file with boot.img from gionee, zip it back again, copy to sdcard, then flash in cwm..

mastermind1024

Tested ok...things work...

saivignesh

@mastermined can u make unsecured init.d supported boot.img from gionne rom

coz every other boot.img doesn't seems to work

shahabazas

Ya mastermind please do it... PLEASE....

And saivignesh I have downloaded the scatter mito, GN105_T39_C and the recovery CWM recovery and had flashed successfully the Goinee ROM on my A75 with the SP Flash Tool hey i havent ticekd the Preloader while flashing is that fine as if my phone is ok and now had replaced the boot image from Blue Terror with boot image of GN105_T39_C folder so now can i Flash the Blue Terror with the CWM. Please tell me so that i can proceed...

Edit:
Hey i have Flashed Blue Terror now and i got 175mb internal memory is that correct and have you all got the same or is there something i need to do please let me know...

Last edited by shahabazas; August 1st, 2012 at 01:43 PM.

mastermind1024

I have already made that last night along with all ext2,3,4 module initialization on boot n used that during my mito scatter flash but looking to the popularity i kept it to myself, if u guys want it then look for the new thread soon....

Last edited by mastermind1024; August 2nd, 2012 at 06:33 AM.

cell0ne

Sorry for dumbo question,I have installed this ROM but now everything appears in Chinese,how to change the default language to English?

I forgot to replace the system.img file which I just did now and now the main language turns into Russian (and not English).I think I am doing something seriously wrong somewhere!!

Last edited by cell0ne; August 3rd, 2012 at 08:39 AM.

saivignesh

this is too easy just goto settings and select language and keyboard
select one by one in settings menu to identify the language and keyboard option

I think u can identify the settings app by its icon

Last edited by saivignesh; August 3rd, 2012 at 09:07 AM.

cell0ne

Thanks saivignesh,I just did like that last night.Have you also tried chinese ROM(Gionee)without changing the system.bin file?when I installed it first,it looked a very smooth one though I uninstalled it because I was not able to find english option in it.

saivignesh

u can do that in couple of steps in chinese rom
just press option button(1st soft key) from the homescreen and select the last icon from the pop up menu
this directs u to settings app

then select 2nd option

satyajit2412

I am currently flashed the Rom by using Mito Scatter & Root_and_Clean_FLyIQ270 which gives 233 MB Internal Memeory. If I use Recovery(Given by saivignesh). So can I flash any zip files like Blue terror or Sagarwep ICS2.0 or Jet Mod OR UOT Kitchen Zips. Please let me know

Last edited by satyajit2412; August 8th, 2012 at 10:11 AM.

saivignesh

yes u can

vkrajuu

Do you face any issues with phone network dropping out on this rom? I am using it now and having lots of problem with the phone network where its getting dropped out?

Anyone any solution?

shahabazas

Hey saivignesh have you used the mito scatter with the MMX New Ver folder if yes then we can just flash the MMX New Ver Folder and then can have the increased internal memory too so please let me know if you have tried it and what was the result.

saivignesh

yes I have tried that also
the phone not booted

Last edited by saivignesh; August 8th, 2012 at 11:00 PM.

satyajit2412

I have tried the recovery(Given by saivignesh), it works for me. But when i flashed Blue Terror Rom, faced Bootloop, then I replaced the boot image with the boot image which is present in the GN105_T39_C. After that I again flashed Blue Terror but now my touch is unresponsive.