IPWNPACIFISTS

Didnt know what those were so I always delete them no problems I can see from deleting

DonB

You can delete I do all the time

__________________

IPWNPACIFISTS

https://play.google.com/store/apps/details?id=com.paranoid.preferences.pro

Would this work with this ROM?

MahaloCat

Same thing as the Flashable PA Preferences in the OP...

IPWNPACIFISTS

In the play store it says it adds useful additions...

MahaloCat

Buy it and let me know!

DragonSlayer95

That seems alot like the pa preferences, then again I could be wrong

DS

__________________
Has someone helped you? Dont forget to hit the "thanks" button!
Seen an offense or bad post? Hit the /!\ button!
Help support BabyBlues in her walk for breast cancer, click below for more information

IPWNPACIFISTS

Here are before and after shots I didn't notice any new additions... I guess since we flash the preferences and they don't come with the ROM nothing changes I could be wrong I was curious nothing major...

DragonSlayer95

You check all of the tabs to see if any goodies there was added in?

DS

IPWNPACIFISTS

Yep same as before

DragonSlayer95

Probably made for those roms that isn't PA based then.

DS

IPWNPACIFISTS

Read description its for pa ROMs I'm gonna flash my pa nandroid and see if any changes come about I'm on test build guys no problems so far..

Edit: my pa nandroid has a md5 mismatch anybody know how long dropbox allows you to recover deleted files I had an older pa nandroid there

Last edited by IPWNPACIFISTS; January 9th, 2013 at 07:34 PM.

DragonSlayer95

According to DropBox Site, 30 days

https://www.dropbox.com/help/296/

DS

paully

WiFi tether crashes.

I'm on clean install of the latest test.

anyone else?

DonB

I still have not flashed PAC as of yet, but I know that CMB said his was working fine with no issues.

IPWNPACIFISTS

Works fine for me I haven't changed anything on another note battery is at 78% been off charger since 7am I have played games and taken pix just mentioning never had a battery problem just sharing

paully

I noticed that in the 'about phone' settings it said PAC v 19.0.2. So to make sure I had didn't accidentally flash the wrong one, I flashed it clean again, making sure I grabbed the "...19.0.2-1.zip".

it still says PAC v 19.0.2 in the 'about phone' settings, so cmb prolly didn't update that for this test build.

wifi tether still crashes however. logcat's attached. it seems the poop hits the fan in line 37 with:

I/TETHER -> NativeTask(26885): Trying to load libwtnativetask.so
E/TETHER -> NativeTask(26885): Could not load libwtnativetask.so

i don't know if it is this simple but, does anyone have this file and know where I should put it?





EDIT: holy poop. i see what's going on here. some damn silliness. the "...19.0.2-1.zip" was probably the file manager renaming the file (i.e. adding the "-1") because I downloaded the same damn file again. perhaps I'll try downloading the correct rom file this time.


EDIT EDIT: the link in the OP here still points to the "shooter_PAC_JB_4.1.2-v19.0.2.zip", i'll grab "...19.0.7.zip" at xda.

Attached Files

alogcat.2013-01-11-16-46-31-0600.txt (10.9 KB, 0 views)

Last edited by paully; January 11th, 2013 at 05:22 PM. Reason: revelations and lamery

DonB

Let me check, if that is the case I will fix it

DonB

OK link fixed, should be proper now, dunno what went wrong

TurboAAA

This ROM has been great ever since that dev who ported PA got banned. Actually I decided to not even use the PA preferences. CM10 just works without it.

Anyway my only problem is no USB tethering. I am having problems with wifi but hopefully the latest update will fix that. But I still want USB tethering for when I don't want to share.

Brian706

I still have issues with sweep to wake, and kill app back button. I ended up restoring to the last build for now.

__________________

DonB

Interesting, I am also surprised that when CMB posted the new release he did not post anything either here or XDA, not like him. Keep the feedback coming, have you tried turning S2W off to see if all else works fine. ??

DonB

New release, CMB updated OP

MahaloCat

DAMN...

"Lot's of framework updates and audio updates"

Means a clean install.....sigh....

toad6386

I thought I had read somewhere AND I had assmed (spelling intentional ), that due to the AOKP components of this ROM, one could NOT be on HBoot 1.58 to flash this. But today I checked on DS95's awesome Hboot/ROM compatibility thread, and saw PAC was under the "ALL HBoots" section.

So was I wrong all along, or did one of the updates clear this? I'm used to being wrong (ask my wife), but has this always been the case or did one of cmb's updates fix it and I missed it? I'm running out of excuses to flash this!

TIA

DragonSlayer95

As always, don't rely 100% on the section of my thread. I can't get it updated as soon as a new update for a rom is out.

Always read the op of the rom before flashing.

DS

toad6386

Yes sir, I know how hard it is to keep something like this up, and to check the OP. But that's the thing, I HAD been unable to find it. I just found post 106 of the OP on XDA that it has to be 1.5 or below (sometimes you gotta be part bloodhound to find out the needed info! )

So, this will have to wait until I have time to flash new HBoot!

Thanks!

DragonSlayer95

Really? At least in the op here that sir spidey (Don ) keeps up, is in the op.

DS

IPWNPACIFISTS

I'm still on the test build I'm being lazy lol I know another release is imminent so I shall wait for that one...

toad6386

Well, I do wear glasses for a reason! I guess I can't say the LARGE PURPLE FONT that says "not for HBOOT 1.58..." was hard to read! Sheesh! That's me, the perpetual n00b!

DragonSlayer95

You should use TapaTalk like i do, no purple color here

DS

ggrimaldi

Downgrade... downgrade...

MahaloCat

Ok Flashed and all is good in Paradise.

Did a full format and Flash Flashed Gapps.
Reboot....flash all Goodies.....Wimax logs (not sure if Needed anymore); PA settings; No Pin Exchange - reboot.....

Flash Data Backup from Nandroid....WHAMMO! Awesome sauce

DonB

Be careful with the data backup, if you start seeing issues you will have to do a full wipe and fresh install, keep your fingers crossed, sometimes the issues don't happen right away. Just be aware.

Did you also flash SK Gapps too ??

DragonSlayer95

I've never done a data restore, what's 20 minutes of titanium backup and some sorting around going to hurt?

DS

IPWNPACIFISTS

+1

MahaloCat

Yeah...My first time ever doing it.
My Data is a little wonky....but confirmed with Ramjet that his speeds are Bad today too....

ggrimaldi

Does the wifi tether work?

MahaloCat

Yes - IT includes TrevE's Modified Wifi Tether....
Make sure you are set to evo3d

MahaloCat

Here is first for me....
Phone is no longer showing up on the online PlayStore....
I can still access Via the Phone though....

Anyone else?

bental

I'm having a little trouble with the recently released versions, specifically 19.0.2 and 19.0.8.

I've tried upgrading to both of these from 18.0.0, but both times I try my wifi stops working, and I still don't have bluetooth capability.

Should I try to downgrade my phone completely back to the stock ROM, then upgrade to 19.0.8 again? I'd been trying to flash it directly on top of 18.0.0, after doing a factory/cache/dalvik wipe.

Edit: I did just realize that I never pushed the boot.img for the newer versions. Would that cause a problem, perhaps it's trying to boot into the older 18.0.0 instance still?

Last edited by bental; January 16th, 2013 at 10:06 PM.

DragonSlayer95

I could be wrong on this occasion, but I don't think the boot.img needs to be flashed with an aosp rom, Don Brian or Scotty is better to confirm or deny this.

Are you clean flashing or dirty flashing from 18.0?

Edit: just noticed you mentioned doing a clean flash.

Which hboot are you on? 1.58 or 1.50? If I'm not mistaken newest is meant for 1.50 and below.

DS

ggrimaldi

Ok thanks, I'm downloading it right now.. I will give it a try after flashing it..

Brian706

Confirmed. I'm assuming you are s-off? No need to manually flash the boot.img

Sabreslight

Using this rom and I love it

bental

Clean, as far as I can see that's supposed to be done. I have not completely downgraded to the stock rom yet, but I have done all the wipes through recovery (except battery.)

Bootloader header:

So HBOOT 1.50 as it should be, but I do have S-ON. That may be why, huh?

EDIT: Lame thing is, I was on S-OFF before but some tutorial told me to go back to S-ON. Now the only method I can find for S-OFF is the wiretrick, and that seems dicey. I'd also have to go back to the stock RUU anyway for that.

Last edited by bental; January 18th, 2013 at 03:17 PM.

TurboAAA

Need help with tethering (wifi and USB). Long story short, this is now a deal breaker for any ROM\kernel for me.

I am running:
EVO 3D Sprint
S-OFF
HBOOT 1.50
Kernel : 3.0.54-ck1-butteredtoast-ics-RLS14+ggutierrez@SOLIDUS #61
PAC Version 19.0.8

The wifi tether TrevE Mod would never load properly (sorry for being vague) and when I try to use the built-in CM USB tethering it will never start. I would prefer USB tethering if it's possible.

Is this a kernel, ROM, or user issue?

MahaloCat

Uninstall the Wifi Tether - then reinstall and reboot.
Make sure you have selected the Evo3d as the device profile.

Brian706

Well this rom flashes a kernel so the first thing I would try (if you haven't) is to use 4ext recovery and make sure "smart flash" is enabled. This will allow s-on users to flash roms with kernels.

If you have already done that or try that and it still won't boot, then get the boot.img out of the rom you are going to flash. Flash the rom, then flash the boot.img via fastboot with

MahaloCat

... Feeling the need to Flash SOMETHING.....