Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
What RUU to take for out of box state?
I have a HTC Desire, with CM7. But I want to sell it, so now I need to unroot it.
I am S-ON, CM7, and with Amon Ra + Ext partition.
I want to get my phone back to Android 2.1 or 2.2. That's what came with OTA's.
I rooted mine at 2.2, so now what RUU to take? There are multiple ones...
My phone is also not branded!
some info:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Device(s): HTC Desire rooted and S-off; cm7 hboot, Mildwild v3.3
Thanks: 24
Thanked 12 Times in 11 Posts
Personally I would think you should leave it as is - rooted. I would think the new owner would appreciate it. The low space issue will likely cause them grief down the road, and they will potentially re-root anyways.
Just my 2cents. :-)
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
Yeah, but the phone looks like as its not used. So I want to unroot it, have nothing on it, no root. Just as how it came stock. So the next owner also has no waranty issues and stuff. Now don't ask why I want to unroot, or leave it rooted. Just unroot it :P
Please help me with this... Choosing the right RUU is very difficult.
But as I have never flashed an RUU you may want to double check.
Thanks, but how do you know I need that one? And because you said you may want to double check, I hope someone else will also reply with what RUU to take.
Going from Su roots guide to rooting (here is a link) http://androidforums.com/desire-all-things-root/221212-faq-rooting-updated-11th-november-2011-a.html#21
Do you have a note of your version prior to flashing. If not you could always use the gingerbread HTC developers ruu which is on the HTC development website
But if you really want froyo I believe it is the one I quoted previously
Don't forget you will meed to downgrade your hboot from the alpharev site as stock roms wont fit on the cm7 r2 hboot
Do you have a note of your version prior to flashing. If not you could always use the gingerbread HTC developers ruu which is on the HTC development website
But if you really want froyo I believe it is the one I quoted previously
Don't forget you will meed to downgrade your hboot from the alpharev site as stock roms wont fit on the cm7 r2 hboot
I know my phone was on 2.2 before the rooting. Because I couldnt wait for 2.3... And I do not have the cm7 hboot, I am still on the stock HBOot, I just flashed cm7, without hboot. But still, how do you know what RUU it should be?
And can anyone also confirm this RUU named by Paul8944?
That's even my topic... xD But they said the latest WWE, but which one would that be then? Itś so confusing... I still hope someone could confirm that WWE...
Device(s): i7500@galax0-1.6.3.4
OC@710mhz
HTC Desire - never ending modding
Thanks: 111
Thanked 981 Times in 816 Posts
do you know what software version in full you were running before rooting?
without this we cannot confirm which 2.2 RUU you can use.
do you know if it was branded or not
if you do not know anything about the above then flash the dev 2.3.3 official HTC RUU
this will put it on gingerbread, keep the warranty and unroot it. 2.3.3 doesnt care what previous SW version you were on as long as it was an EU GSM build device
warranty can be passed on as long as proof of purchase from original source can be provided.
hboot.img with stock hboot.img (If you are s-off you may need to flash the downgrader.img first as Alpharev / revolutionary hboots have write protection)
boot.img with stock boot.img
system.img with stock system.img (this is where your root access is)
radio.img with stock radio.img
It will remove ALL Traces of root. This is what HTC technicians flash on phones when they do a repair job.
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
Ok, as I understand it will remove root, and all.... So now what to do first?
I have CM7 with a ext 4 partition. I know I can remove that partition with Amon Ra recovery.
so take these steps?
1. make sd card backup
2. remove partiton using Amon Ra Recovery
3. Would it boot without SD card ext partition? I really don't know. This step must be filled in.
4. connect phone to computer
5. start RUU and follow instructions.
What must be after the removing the partition? Flash CM7 again? Or do full wipe, and then flash cm7? Or could it just boot?
Device(s): HTC Desire (rooted and thoroughly modded)
Thanks: 464
Thanked 1,119 Times in 908 Posts
CM7 should boot without the ext partition (may depend on what a2sd method you installed). But I don't think that matters: boot into fastboot mode (boot while pressing the "back" key), connect to computer and it should show "fastboot usb" on the screen. Then you can run the RUU. This would work even if you don't have a bootable ROM (and I'm not sure that an RUU would work with CM7 anyway).
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by Hadron
CM7 should boot without the ext partition (may depend on what a2sd method you installed). But I don't think that matters: boot into fastboot mode (boot while pressing the "back" key), connect to computer and it should show "fastboot usb" on the screen. Then you can run the RUU. This would work even if you don't have a bootable ROM (and I'm not sure that an RUU would work with CM7 anyway).
I found out, that I have to remove partiton, wipe and flash cm7 again.
So you say, first just try with phone on ( Must it be connected to PC with diskdrive? Or with HTC Sync? Or with just connected? ) and run the RUU, if that fails try it in fastboot? How do I know if it fails?
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
I think I now got a USB-brick... again... Now what to do? I have not tried the RUU yet. I restored my nandroid backup and now cant boot anymore. ( stuck in cm7 load screen )
I have done step 1, but I don't know how to continue... Please help me. ( I know I need a very detailed instructions, so please give detailed instructions. )
Device(s): HTC Desire (rooted and thoroughly modded)
Thanks: 464
Thanked 1,119 Times in 908 Posts
Right, that guide is mainly talking about what to do if an RUU doesn't fix it, so starting from an unrooted stock ROM. So don't worry about the "temp root" business. But you need to be booted into android to follow the rest of the instructions - is that working?
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by Hadron
You can make phone calls? Normally you lose that if you have a USB brick.
I can now use the phone, can acces the sd card. Its now not charging from wall... Only when its off. And first it could not flash anything anymore. I solved that, now only the wall charging, i know its still from usb brick. And then the RUU...
Device(s): HTC Desire (rooted and thoroughly modded)
Thanks: 464
Thanked 1,119 Times in 908 Posts
With USB bricks all I know is what I have read - never had to do it myself.
That guide seems pretty much step by step. The file attached to it is an archive containing all of the tools it mentions. So you could try following it, leaving out the bit about visionary (since you have root already).
The alternative is to try the RUU and see whether that fixes it, and if not follow that guide (including the visionary stuff, since you will no longer be rooted).
Or wait until someone who knows USB bricks comes along (or search for posts from Rastaman-FB, as he's talked a number of people through these).
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
Ok, I found out my CID
fastboot said:
INFOCID is HTC__E11 ( I don't know how many '_' there are. )
Now the software number,
What must it be?
Android Version: 2.3.7
Baseband version: 32.49.00.32U_5.11.05.27
Kernel version: 2.6.37.6-cyanogenmod-geb50077android@portatile #1
MOd version: CyanogenMod-7.1.0-Desire
Build number: GWK74
What must be filled in in that file?
And isnt it possible to use this? Desire mtd0.img creator to generate a mtd0.img?
Or could anybody else create the files? Which I need to copy according that guide?
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
Ok, as I read a lot I came on difference things...
The CID must be in the mtd0.img file
The ROM version must be the kernel version, but that one, mine is too short ( If I only take the numbers, named in earlier post ). On other websites I also read that the ROM version does not matter.
So I want to ask it to you, must the ROM version be in the mtd0.img file? Or just only the CID?
Device(s): HTC Desire S-ON with CM7, Asus Transformer with Dock!
Thanks: 0
Thanked 0 Times in 0 Posts
[SOLVED]What RUU to take for out of box state?
It's solved!! I managed to combine multiple tutorials to get off the USB brick. Now I run the RUU, and I am on 2.3! Thanks to you all guys! To everybody who replied here! Really thanks!!
I hope I won't ever return here! ( No, I don't mean on the forum. I mean on the rooting part! :P )
The HTC Desire is one of the latest high end phone by HTC bringing a huge 3.7" inch high quality AMOLED screen for crystal clear viewing, powered by a 1 GHz Qualcomm Snapdragon processor and runs on, you guessed it, Android.
We first heard a... Read More