ytaylrmade

It did once or twice but instead of ir xoming up all the way it just pops up in the lower right hand side and say "android 1.0". I've downloaded the hardware but it just doesnt pip up.

htcjunkie317

try doing a system restore to earlier date then install drivers

ytaylrmade

How do I do a restore.?? I've done a recovery from bootloader and clear storage.

htcjunkie317

on ur pc not the phone

ytaylrmade

Using the ruu.??

htcjunkie317

No restore ur pc to an earlier time, start all programs then i think system tools it will be in there somewhere

Ninjakills1

Hello, I ran into a couple of pots holes along the way during the flashing. I got/stop as far as the NV item writing and could not to do so because the cdma workshop 3.5 was a demo and doesnt allow this option. Can I still use my Sanyo Incog in the meantime until I get things up and running? I'm currently without a phone at the moment.

1. Does anyone have a working cdma workshop, I'm not able to unzip/extract files from the one posted? I keep getting a unread on corrupt file.

2. My phone was already flashed once thru someone else but later my account was closed because they used that same donor phone on another account thus causing me to have to buy a new donor phone of my own. Couldn't I just skip a lot of this stuff and just enter in my new donor phone info? If so, where do I start?

Thanks

ytaylrmade

My phone still isnt recovering. I'm sending ir to get fixed. Hopefully it'll be fixed.

Now my other evo is having back light ossues. Everything but the backlight works. Does anyone know how to fix it.??

ytaylrmade

My phone still isnt recovering. I'm sending ir to get fixed. Hopefully it'll be fixed.

Now my other evo is having back light ossues. Everything but the backlight works. Does anyone know how to fix it.??

htcjunkie317

Loose ribbon cable maybe or just needs a new lcd screen.

anothername

Keep on trying and make sure you have the correct drivers installed. CDMA workshop can read the Prevail. You can get the NAM 1 and NAM2 files from it. You can also read the memory.

htcjunkie317

the new cdma workshop 3.8.5 is awesome!!! It will obtain the ha and aaa keys from the nam files. No need to mess with nv items!!!

alansupra94

I am flashing a HTC Evo shift to Boost mobile using a Samsung Rant and have some serious problems.

I managed to use the "open sesame" folder to change the ESN and it has been sending and recieving calls/texts.

However, the data is not working and I tried EVERYTHING. I have the correct HA and AAA passwords for both profiles and tried setting them to no avail.

I noticed here you said you don't have to mess with NV items. Does that mean I can keep the factory sprint 465, 466, 1192 and 1194? How did you go about this?

Also, not sure if I am reading this right but, did you change the SPC on the 4G phone to that of the donor phone?

leeji

I am now getting close to the end. and here says:
RequestNVItemWrite Meid 0x00A0000000000
how many digit should I put here.
in your attached pdf file, it says 0x0A000000000000.
these two are different, which one should I follow?
and I check the back side of my donor phone incognito, the MEID HEX shows
A000001290F728 14. what is the right format for me to type into command.

I tried type in
RequestNVItemWrite Meid 0XA000001290F72814. but it always error. does it must have 16 digits start at "Axxxxxxxxxxxxxxx".

would you mind to help me on this matter. many thanks for your great help.


Round 10 (EVO 3D)

Now you can write your MEID/ESN of you Incognito to your Evo 3D, In QXDM type the following commands. (Replace the X’S with your meid

Password 01F2030F5F678FF9
RequestNVItemRead Meid (this will display the current Meid)
RequestNVItemWrite Meid 0x00A0000000000 <-Meid/HEX ID from your donor Incognito/rant
RequestNVItemRead Meid (This should now display your new Meid)
RequestNVItemRead ESN (This should now display your correct Esn)
You are now done close QXDM.

Last edited by leeji; June 7th, 2012 at 10:13 AM.

armeN0317

anybody figure out if we can get 4g working now that boost has 4g?

leeji

following,
now has serious problem. I write into the meid and esn, but with the wrong number. Now I cannot see the file 0 and 1943 anymore by EFS explorer, and cannot zero the MEID and ESN.
what shall I do.
thanks,

Pokeemonn

hey been lurking for a while but I have a question/problem.

CDMA Workshop can find and connect to my phone but QPST and QXDM do not recognize it on port10(QXDM finds it but under GPS Target) I have tried to update the driver and roll it back, I have made it up to the point to search for my MEID and both programs worked no problem. I came back last night to finish it up and it was no longer finding the phone. Any help would be awesome, thanks!

Bobbyb1150

Hi I need help please. My friend bought a htc evo 4g sprint to flash to boostmobile and he was using CDMA workshop used a incognito got the spc and everything changed then he hooked the evo up got the spc and went to rewrite the nv items did so then the phone reboot for some reason and now the phone is in boot loop. Tried to reset with sprint stock and it goes through the whole thing then reboots and its still in bootloop. The computer recognizes the phone in fastboot but won't reset it. When hooked up to computer and put in hboot the computer pops up a android 1.0 tag in the bottom right side of computer but won't do anything. Theres no recovery just goes to bootloop again. I need to know of there's a way to reset back to stock. It's rooted with clockworkmod and s-on. Any info would really help. Thanks in advance.

new optimus

you try one of the RUU's?

__________________
If you care to buy me a Coke click here
In other News Ron Paul 2012

pax1

im sorry to hijack this but ....my 3d evo is already flashed but the meid is allready used ....i have a donor phone incognito ....do i have to reflash it like guide says i also want a link to the new cdma ...notice im a newbie...i did not flash mine i paid for it but got screwed

new optimus

When you change the meid you will also need the use the HA and AAA keys of the new donor so yes you will need to go through all the steps.

And for the new cdma ws you will only find the new one Here

Pokeemonn

Anyone able to connect to the Incognito via CDMA Workshop but not able to read it? I noticed the front keypad slowly flashes and was wondering if this has something to do with it. I could use any help as my pc that has xp on it is super glitchy and is actually working at the moment, I have been trying to do this for a week!

kamanut

hi guys....well i was using a htc evo on boost that was already flashed....now i upgrade it to and zte wrap...the quetion is how do i activate it back on boost?

at2ndct

Hey guys!
I am trying to flash my EVO to boost
I am stuck zeroing my esn,I have zeroed the codes several times now but no luck!
Anybody with some suggestions! I also scanned with cdma and still gives me the same codes that I already zeroed, some keep coming

back too!
Please need help! Thanks!

cbucz24

It takes time...I kept going in circles trying to get them, only to reboot and there was still a few there...I used this to finally get them to all zeros

How to scan MEID locations in CDMA workshop 2.7 - xda-developers

Its a long process, but I can see this is the most foul-proof method. This is as opposed to trying everyone else's memory locations in attempts at finding them.

This finds "your" locations, all of them!

at2ndct

hey guys! i'm doing my first flash!
i HAVE THE INCOGNITO FOR A DONNOR, NOW I AM STUCK IN THE PART WHERE I'M ZEROING THE ESN MEID, I HAVE ZEROED THE MEID BUT I CANNOT GET THE ESN TO ZERO OUT!
I HAVE USED THE LIST OF CODES THAT CAME WITH THE GUIDE. AND FOUND 12 ESN FOR THE ESN I ZEROED ALL 12 BUT NO LUCK!! I TRIED ZEROING AGAIN AND SOME ESN NUMBERS SOMETIMES COME BACK!!!
ANY THOUGHTS ANYBODY!!!!!!!!!!!!!

sorry did not notice i had already sent the first post!!!

Last edited by at2ndct; June 23rd, 2012 at 12:39 AM. Reason: already posted

at2ndct

thanks!! i'll give a try right away!!!

at2ndct

well i tried it already!
only gave me 8 codes for the esn and only 2 found my esn (reversed)
but still cannot zero out my esn!!
is there any other method of doing this!!
i have os 2.2 radio 2.15.00.09.01 wich i downgraded from 2.15.00.11.19 hw3 prl 60678
pri 1.90.003 kernel 2.6.32.17

Pokeemonn

I am curious, when it says zero out all ESN and MEID numbers does this mean only as a whole string of numbers or does it mean partial strings as well? Also having trouble converting the addresses from WinHex to QXDM, any help would be great!

AshtonDurkhun

Does this require a "smart phone" as donor? My friend has a Boost flip phone (no idea the make/model) and if I upgrade from my evo I might give it to him to use on boost.

at2ndct

ok! hey guys i followed the instructions on how to put the evo 4g on boost!
i kind of got stuck on the zeroing part! but after trying everything out there from
downgrading from radio 2.15.00.11.19 to 2.15.00.01.09 nothing was working for me!
i had to upgrade again to radio 2.15.00.11.19 and then did a bunch of different scans! and finally i was able to zero out both my esn & meid!

now i wrote the donnors (incognito) meid to the evo and on qpst followed the editing part of prof 0 and prof 1 and active user to 0 wrote to the phone and then rebooted by itself and during the reboot the screen on my pc popped a screen saying the mobile reported the follwing errors while writing nv!!!!
error nv_ue_imei_i nv_readonly_s
well i let the phone finish rebooting itself it does show my incognitos info! but i get no 3g!!!
i went back to qpst to redo the last steps a few times i noticed that everything looks good! expept for the active user 0!!!
it wont stay on 0 !!

any help with this issue would be appreciated!! thanks!!!!!!!!!!!!

new optimus

Any phone will work to get talk and sms texts but for 3g you need a 3g capable phone as the donor.

a "smart phone" is not a requirement though.
The one that everyone uses because it is easy to use and gives 3g is the sanyo incognito. but other phones will work however if they are a 1x phone you will be limited to 1x speed.

Yoandrisco

My story: HTC EVO 3D FLASHED TO METROPCS I had S-ON and everything worked perfect.... One day a new solution came out to get S-OFF (the one with the cable trick) anyways I did this s-off tutorial and everything went well I got S-OFF!! BUTTT the MEID went back to the sprint one instead of the metro meid that it had... SO Im trying to Get my metro meid back to the phone...I already did all steps but im stuck in the part where i have to go to the "nvm" folder in efs explorer..... Theres no "0" or "1943" file in there ... I already repeated all steps several times... Check all software version (qpst 2.7 355 etc..) please help me

note:
I have cdma workshop 3.4.5 bought it 2 years ago idk if that can help me in something. Thanks
my number is 786 343 5667 text me please if you know whats wrong

Android 2.3.4
HTC Sense 3.0
software number 2.08.651.2
Baseband Version 1.06.00.1216
pri 1.42_003

Last edited by Yoandrisco; June 26th, 2012 at 11:09 PM. Reason: adding info

Yoandrisco

My story: HTC EVO 3D FLASHED TO METROPCS I had S-ON and everything worked perfect.... One day a new solution came out to get S-OFF (the one with the cable trick) anyways I did this s-off tutorial and everything went well I got S-OFF!! BUTTT the MEID went back to the sprint one instead of the metro meid that it had... SO Im trying to Get my metro meid back to the phone...I already did all steps but im stuck in the part where i have to go to the "nvm" folder in efs explorer..... Theres no "0" or "1943" file in there ... I already repeated all steps several times... Check all software version (qpst 2.7 355 etc..) please help me


note:
I have cdma workshop 3.4.5 bought it 2 years ago idk if that can help me in something. Thanks

Android 2.3.4
HTC Sense 3.0
software number 2.08.651.2
Baseband Version 1.06.00.1216
pri 1.42_003

mnJuggalo87

Im so close to say F it all in this whole process and dropping 600$ and buy the 4G evo from boost that they just released. i bought a guide i fallowed all the steps. And the guide said that you can use any 3G boost mobile phone ive got the samsung galaxy prevail and the samsung transform ultra. i got to where you use QXDM and try to find the HA and AAA passwords by typing in the password blah blah then the requestnvitemread blah blah stuff and everything comes up as zeros i need a detailed tip on how to find that and if i go to ##data# enter spc and hit edit enter spc i can change the HA and AAA password there cant i just do that or dose it need to be the one from the phone......NEED HELP DONT WANT TO DROP 600$

new optimus

for metro pcs you do not change the meid, you pay metro to add that phone to there esn list.

new optimus

You can not get those from the prevail through those programs, there is other way but it takes time and patience.
This post tells the way to get them.
xda-developers - View Single Post - Htc flash to boost mobile guide [noob]

mnJuggalo87

I read that one from page 1 to 71 no help at all

mnJuggalo87

Well that link I have read about 10 times what program do I need to root the prevail

Pokeemonn

Could you possibly post all the addresses for the MEID locations you used? I am having trouble find a couple, I have done scan after scan and such, the ESN is zeroed but now I just need the MEID. Thanks in advance!

Pokeemonn

I can find all the ESN locations but only 7 of the MEID locations, I have done the scan in CDMA WS over and over and still come up with the same results. Has anyone done this with radio 2.15.00.11.19 and can post the addresses they used? It's been about a week and I am about to smash the phone. Also the Evo 3D method does not work, can't see file 0 or 1943 in EFS, although using revskills I can browse using their EFS and I see both files but I can't edit them cause it doesn't have that option.

new optimus

you do not edit them on the phone. You copy them to your computer then using hex editor edit them then copy them(and replacing the one on the phone) back to the phone

Pokeemonn

I understand that, I don't see them at all in the folder using EFS Explorer but I can see it using the EFS tool in RevSkills. For some reason it is hidden in the Num folder. Any ideas?

panic.exe

UGH! i can't move the damn file 0 and file 1943..every time i try to copy the files from the phone i get error code (222) invalid argument!! any ideas?????? im seriously close to smashing this evo 3d into a million pieces.

*EDIT* Ok i solved the issue for anyone having the same problem. instead of using QPST 2.7 Build 355 i used QPST 2.7 Build 366 and i could drag the files..

i am however stuck agian :/..

stuck on "Round 9" i have zeroed out and everything went well now i need to write my meid hex id in QXDM but i'm unsure what it is or where the find it..

i think it has something to do with "round 3" and "round 4"

as the evo 3d guide has you obtain 465,466,1192,1194 and nam1 and nam2 but never says what to do with the files maybe it was accidentally left out of the 3d guide?

so where may i obtain my meid hex id? any help is much appreciated thanks!

*EDIT 2*

alrighty, so i believe i have the esn and meid part done correctly however after finishing everything up (ha, aaa etc) and rebooting the phone sits on hands free activation and never finishes and errors out.

("Your activation could not be completed to try again, choose "update profile" inthe system updates area of settings. if the problem persists, you may need to contact customer support. error code:1012").

also let it be known this phone was previously owned by a friend of mine in which he had it flashed to verizon (the msl was all zeros etc) so i did a ##786# reset and cleared everything out but it still wont activate.. i did notice after doing that the info in ##786# the phone number is now 000000#### (#'s being the last four digits of his old number) but the meid and esn matches my donor any idea whats going on or what i can try to do to get this thing working? thanks in advance.

Last edited by panic.exe; June 29th, 2012 at 11:29 AM. Reason: solved my own issue

Pokeemonn

Ok so I updated to build 355 of QPST and I can now see files 0 and 1943! Thanks panic.exe for that one! Now my only problem is I can't click and drag it to my desktop, doesn't even drag at all. Any ideas?

panic.exe

uninstall build 355 and install build 366.

panic.exe

ok got an update on my status...

got everything correctly put in programming service.. hands free activation still isn't working so i decided to try to make a phone call to see if i could dial out or if i got sometype or error.

I got transferred to "welcome to verizon wireless, please wait will we transfer your call" so somehow the phone is still trying to use verizon???? any idea how i would change this? is there a setting somewhere on the phone that i am missing???

i was looking around and i think you have to flash a .000001 prl to get it to work with verizon so maybe that is the problem? how would i go about flashing the correct prl if that is the problem? also where would i be able to get the correct prl i need? can i pull it off my donor?

any help would be very much appreciated thanks alot!

Last edited by panic.exe; June 29th, 2012 at 12:21 PM.

new optimus

prl is easy you can do that with cdma ws or qpst sprint prls will work perfectly and you can find them at xda forum or just do a search for sprint prl.

panic.exe

alrighty so i wrote nam1 and nam2 from my donor to the 3d in cdma workshop and the correct info is now displayed under ##786# my phone number is correct and msid is correct as well as the esn and meid however if i do a factory reset from this screen when the phone reboots after it is done clearing everything it reverts back to the phone number being 0000007812 but the esn and meid is correct for my donor.

i tried to make an outgoing call to see what the message would be before reseting in ##786# while the info is correct and got error number 16 while making the call.

trying to call after the reset (when the number is reverted back to 0000007812) the message says "your account is not autherized to make calls to this number, please call customer service yada yada yada"

i did write the prl from my donor (nam1.prl it said nam2 didn't have prl info or something like that) in cdma workshop under the other tab. but it didn't make a difference still unable to do hands free activation after rewriting nam1 and nam2 under the nam tab.

any ideas if im doing something wrong? or any ideas what to try next?


*edit* ok so i couldnt get the new sprint prl to flash with qpst was saying something about it has no data or something however i was able to get it to write a boost prl (61008.prl) but i still can't get it to do the hands free activation thing :/ any ideas on what to try next ?

Last edited by panic.exe; June 29th, 2012 at 02:39 PM.

Pokeemonn

Thanks, now I can drag the files, edit them but when I drag them back into EFS I get the same error you had, error 222 invalid argument?

EDIT: Got the files changed out ESN and MEID are now zeroed, just wondering if I could have just changed the ESN/MEID right in those files instead of using QXDM to write it?

EDIT #2: Got the ESN and MEID from my donor on my phone, I think I got the wrong HA and AAA pws though which sucks cause the computer I use for XP is terrible and don't feel like doing that all over again. I assume this is the problem cause I still have no voice or anything.

Last edited by Pokeemonn; June 29th, 2012 at 06:09 PM.