Go Back   Android Forums > Android Tablets & MIDs > Gome Flytouch 2

Get excited for the Samsung Galaxy S5! Find everything you need and discuss it in our Galaxy S5 Forum!

test: Reply
 
LinkBack Thread Tools
Old May 23rd, 2011, 07:51 PM   #1 (permalink)
New Member
Thread Author (OP)
 
Join Date: May 2011
Posts: 4
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default [Q] Superpad bricked beyond repair?

I have a Superpad III model: disco, and because there was a problem with the WiFi I tried to flash it with a newer ROM.

Tried those:
[GUIDE] :: SuperPad/FlyTouch2/WWE10 Android 2.2 Froyo USB Flashing :: - xda-developers didn't work
[ROM] (Flytouch 2, SuperPad, WWE10) 2.2 v2.1 #3925 - xda-developers didn't work.
[ROM] (Flytouch 2, SuperPad, WWE10) Froyo - xda-developers only the version number at the bottom right showed, then it stuck there.

Then it was late night...I found the following page and tried them without reading comments or anything:
onderka.com SuperPAD Firmware und Software

I thought it will return back to Factory Default with 1001 Firmware, but it didn't.

Now my Superpad III when ON, there is light and the motor (buzzer?) is always ON, nothing else happens (nothing at all...nothing nothing, no matter what I do).
Please Help.

Note 1: I tried flashing with IUW 1.1, burntool 0.75 and SDCard.
Note 2: I searched the forum before posting, couldn't find anything usefull to my case.

jsalah is offline  
Reply With Quote
sponsored links
Old May 23rd, 2011, 07:53 PM   #2 (permalink)
New Member
Thread Author (OP)
 
Join Date: May 2011
Posts: 4
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Found this: Unbricking Gome/Fake FlyTouch Android tablet | Write code

I disassembled the tablet device, now I am looking for bootloader IC to reflash it. Can someone help me in identifying which one is it?

The following picture is from the webpage link in my previous post:
https://lh3.googleusercontent.com/-YqrpwJk1y0s/TWw_tZRdifI/AAAAAAAAAGo/vCZaRmtsNSI/

The following pictures are for my bricked tablet device:
http://i.imgur.com/0Vtc6.jpg
http://i.imgur.com/pISM1.jpg

None of the ICs looks similer.
Note 1: I can post more pictures if needed.
jsalah is offline  
Reply With Quote
Old June 3rd, 2011, 12:46 PM   #3 (permalink)
New Member
 
Join Date: Dec 2009
Posts: 11
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Same problem!! Have you solved?
Tony2k is offline  
Reply With Quote
Old June 3rd, 2011, 03:11 PM   #4 (permalink)
Member
 
Join Date: Apr 2011
Posts: 199
 
Device(s):
Carrier: Not Provided

Thanks: 4
Thanked 50 Times in 40 Posts
Default

Looks like a proper Disco. When you say that it vibrates constantly, what happens when you have it plugged in & hold the power button down for 10 seconds, then release? Does the vibration stop? Anything on the screen? Charge light on? If so, what colour is it?
bigbaldbloke is offline  
Reply With Quote
Old June 3rd, 2011, 04:55 PM   #5 (permalink)
New Member
 
Join Date: Dec 2009
Posts: 11
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

It vibrates only if power botton it's pressed, the screen it's always black. When the charger it's plugged the led it's green.
Tony2k is offline  
Reply With Quote
Old June 3rd, 2011, 06:24 PM   #6 (permalink)
Junior Member
 
Join Date: Apr 2011
Posts: 53
 
Device(s):
Carrier: Not Provided

Thanks: 8
Thanked 24 Times in 16 Posts
Default

sounds to me that the battery is dead
Roidz99 is offline  
Reply With Quote
Old June 3rd, 2011, 06:31 PM   #7 (permalink)
New Member
 
Join Date: Dec 2009
Posts: 11
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

I had tested it, the output voltage it's 3,88V, It's correct?
Tony2k is offline  
Reply With Quote
Old June 4th, 2011, 01:00 AM   #8 (permalink)
Member
 
Join Date: Apr 2011
Posts: 199
 
Device(s):
Carrier: Not Provided

Thanks: 4
Thanked 50 Times in 40 Posts
Default

When you tried to flash it, how many files did you put on the card? Sounds like, as you've suggested, you put a new (incompatible) bootloader on there.
bigbaldbloke is offline  
Reply With Quote
Old June 4th, 2011, 04:20 AM   #9 (permalink)
New Member
 
Join Date: Dec 2009
Posts: 11
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

I think that you have centered the problem! In tim4e there are two files, firmware2 and firmware-discovery. In the second firmware there is also bootloader-discovery file.
Do you know if I can reflash the flash where is the bootloader desoldering if necessary?
Tony2k is offline  
Reply With Quote
Old June 4th, 2011, 04:41 AM   #10 (permalink)
Member
 
Join Date: Apr 2011
Posts: 199
 
Device(s):
Carrier: Not Provided

Thanks: 4
Thanked 50 Times in 40 Posts
Default

I'm pretty sure that previous Tim ROMs, ot maybe TCH's, have included the bootloader. Hang on, will have a look.
bigbaldbloke is offline  
Reply With Quote
sponsored links
Old June 4th, 2011, 04:43 AM   #11 (permalink)
Member
 
Join Date: Apr 2011
Posts: 199
 
Device(s):
Carrier: Not Provided

Thanks: 4
Thanked 50 Times in 40 Posts
Default

Here you go (assuming you have the 1024X600 display), shove this and 2 correct firmware files on your card & re-boot. ;o)

Index of /Android/Flytouch3/bootloaders/1024_600
bigbaldbloke is offline  
Reply With Quote
Old June 4th, 2011, 05:10 AM   #12 (permalink)
New Member
 
Join Date: Dec 2009
Posts: 11
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Yes, my display it0s 1024x600). How can I flash this boot loader now? I'm not able to start the pad.
Tony2k is offline  
Reply With Quote
Old June 4th, 2011, 05:27 AM   #13 (permalink)
Member
 
Join Date: Apr 2011
Posts: 199
 
Device(s):
Carrier: Not Provided

Thanks: 4
Thanked 50 Times in 40 Posts
Default

Just put that file & the 2 from Tim that you have onto a card, then press the power button. It should look for the bootloader first & foremost, then hopefully replace the crap one with yours.
bigbaldbloke is offline  
Reply With Quote
Old June 4th, 2011, 05:51 AM   #14 (permalink)
New Member
 
Join Date: Dec 2009
Posts: 11
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Tried but it doesn't startup. Do you know if the bootloader it's in a particular spi flash?
Tony2k is offline  
Reply With Quote
Old June 4th, 2011, 08:41 AM   #15 (permalink)
Member
 
Join Date: Apr 2011
Posts: 199
 
Device(s):
Carrier: Not Provided

Thanks: 4
Thanked 50 Times in 40 Posts
Default

Dunno mate, try this one: http://androidforums.com/attachments/gome-flytouch-tablets/18351d1305238942-superpad-iiis-bootloader-discovery.zip
bigbaldbloke is offline  
Reply With Quote
Old June 5th, 2011, 02:25 AM   #16 (permalink)
New Member
Thread Author (OP)
 
Join Date: May 2011
Posts: 4
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Still unsolved.

I am still looking if someone already found it, if not then I have to note all the numbers on those big ICs and then search the internet for information about them.

http://www.alldatasheet.com/

I am busy with some projects so I won't be able to search for those info.
jsalah is offline  
Last edited by jsalah; June 5th, 2011 at 02:28 AM.
Reply With Quote
Old November 22nd, 2011, 04:22 PM   #17 (permalink)
New Member
 
Join Date: Sep 2011
Location: Port Harcourt , Nigeria
Posts: 1
 
Device(s): HTC Mytouch3G, Android Epad 10.2"
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via Yahoo to ajealadick
Default

I have the same problem, the buzzer is ever on. The led charging light is green.
ajealadick is offline  
Reply With Quote
Old December 20th, 2011, 06:45 PM   #18 (permalink)
New Member
 
Join Date: Dec 2011
Posts: 1
 
Device(s): ARCHOS 7 Home Tablet SuperPAD III
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

HELP!!
I have a SuperPAD III, 16GB, 5volt, model: disco10, motherboard is MID10-1x210-v2.0
I have tried to flash it with both Tim5a and Tim6a using a 2GB TF card It start to update but stops at the creating partition part of the up date. Curser is flashing though. Is there a way to reformat my pads memory so that the ROM can create the partition? Or has any one seen this problem before and if there is any ideas...

thanks
ravyn is offline  
Reply With Quote
Reply
Tags
bricked, super pad iii


Go Back   Android Forums > Android Tablets & MIDs > Gome Flytouch 2
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 01:09 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.