famonaco

i tried to root but i can put on undebugging usb no have this voice with 4root, and with universalandroot failed lol

thel2dab

How to root:

1 download launcher pro from market.

2 select home butoon and select launcher pro fom the pop up.

3 long press anywhere on home screen. Select shortcuts and scroll down to settings select activities and then settings and scroll down to development and select it. Place on home screen.

4 now select the shortcut you made and enable usb debugging.

5 open z4root.

6 select permenant root and let it run. May take a while

Last edited by thel2dab; December 26th, 2011 at 04:09 PM.

famonaco

thx mate for the info but the problem is that i haven't development

thel2dab

Famonaco i edited my post select shourtcuts then ACTIVITIES then settings then developments

Sorry

Last edited by thel2dab; December 26th, 2011 at 04:11 PM.

Rabid1

If this is a 9V then they are not the same kernel. My WMT8650 had 2.6.32.9 just like the Flytouch, but you cannot swap those kernels. Unless I am wrong the kernel need to be same hardware to same hardware.

__________________
Skytex Imagine 10 Rabid ROM JB 4.1 - Skytex Sp712 -Skytex Gemini Rabid ROM ICS 4.0.4 Final -Skytex Skypad Alpha 2 7" Rabid ROM Final ICS - Excite 10 AT300 JB 4.1 Stock - Dragon Touch 9.7 Rabid ROm ICS v3 New Kernel - Visual Land Prestige 10 & 7L Rabid ROM JB v1 HP Touchpad 32GB CM9 - HP Touchpad 32GB CM10 - Le Pan S Rooted Deodexed Custom MOD

thel2dab

[QUOT
E=Rabid1;3717974]If this is a 9V then they are not the same kernel. My WMT8650 had 2.6.32.9 just like the Flytouch, but you cannot swap those kernels. Unless I am wrong the kernel need to be same hardware to same hardware.[/QUOTE]
So our hardware is diffent to the one that thi firmware is for???

famonaco

ok done thx

famonaco

So our hardware is diffent to the one that thi firmware is for???[/QUOTE]

have different hwr????? bit confused

Rabid1

So our hardware is diffent to the one that thi firmware is for???[/QUOTE]

have different hwr????? bit confused [/QUOTE]

The power system is different for one, then we don't know what your GPS module is, your wifi module. I think Android System Info could tell us some of that. download it and run it. I get my FT3 back tomorrow I will do the same, then we can compare.

famonaco

have different hwr????? bit confused [/QUOTE]

The power system is different for one, then we don't know what your GPS module is, your wifi module. I think Android System Info could tell us some of that. download it and run it. I get my FT3 back tomorrow I will do the same, then we can compare.[/QUOTE]

imapx200 have , output: 9V ,Wireless LAN 802.11b/g
our productor :

Shenzhen Qing Hua Sheng Chuang Technology Co., Ltd.

Danny Backx

Which usual bug, how can I work around ? Looks like I have the same tablet as you do.
Thanks.
Danny

famonaco

uhm tried many times to go to recovery mode but nothing we haven't this option

dart16

My Disco10 has a RT2870 chipset wifi module (which allows an external RT3070 based wifi dongle to work without further drivers). I believe all FT3's use a HopeRF XN203 GPS module. The FT5 claims a better performing GPS than the FT3 so it's possible that the FT5/6 has a different GPS chip fitted.

Danny Backx

Hmm, my question was too vague. My mistake. I should have quoted this :
So my question is : who can tell me how to work around "usual bug" in the Android Market ? I think I have this same hardware.

Thanks,
Danny

Snecer

It works on this clone...

If you're still missing apps in Market do the following:
- Connect at least once with Market & your account.
- Then go to settings => Applications => Manage Applications => All
- find Google Services Framework from the app list
- click on clear data + OK, then force stop
Reboot.
wait about 1 minute after you're back in.
Start Market again. (if it crashes, wait a bit and try again, it should go through)

Then you should see more apps after that, like google maps, Skype & such. Paid apps are still not available unfortunately.

vshore100

I have a quick question for the pros here. My mom bought my wife and I both one of these yospads for Christmas. I am having trouble connecting them to my wireless router. It says it is out of range when I am sitting right beside it. Any thoughts or suggestions on this? Thanks in advance for any help with this.

famonaco

tried all don't go to recovery mode, ideas?

thel2dab

On mine i made a male to male usb type a cable and connected it to the pc then i turned the tablet off then i pressed menu and power and it stalls at the first screen and m6 pc recognises it as an owon ossiliscope and i download the drivers and pc installs them.

I noticed that when you press menu and power it stalls at first screen for about a minute but if the tablet recocognises nothing is happening it continues to boot.

Lee

thel2dab

Check the wireless switch on top.

Lee

famonaco

u have the same fake model of mine???androidtab 10 etc etc

durgan

yep, same model here too. I've got two of them here, one rooted and one not. Same issue with recovery failing. Also for some reason the one not rooted occasionally has trouble reading the wifi (with switch on). Seems a power cycle once or twice fixes it *shrug*

menaceuk

I am pretty sure mine is as exactly the same as the OP.

but I am having problems with flash videos on the net. Nothing seems to works including youtube. I have several browsers including Dolhine HD which many say is best for Flash videos and Opera Mini.

Any way to get Opera mini to play flash videos ? I get an error every time I try to play a video.


Other than that mine works flawlessly. Touch screen is responsive and the browsing (minus vids) in Opera Mini is quick. App marketplace seems to be full including apps to buy.

Battery seems to last a good 5 hours with a mix of games, HD video watching, web browsing and music listening.

Only thing which I wouldn't mind improving is start up speed. takes a good 90-120 seconds to boot but isn't a massive problem.

Danny Backx

Grab "Show Versions" from the Android Market.
Very small application that'll show versions of your hardware/software, and contains a button to lead you straight to the Development settings screen.
(Meaning you don't need to perform manual steps with Launcher Pro to get to that.)

I'll try to get it up on googlecode as well. {edited : done too : http://code.google.com/p/showversions/ }

Dann

Last edited by Danny Backx; December 29th, 2011 at 03:34 AM. Reason: add link

dart16

You guys with a TAB 10 might be interested in THIS thread

famonaco

thx mate

thel2dab

Yes mate the same. Some more info is the board inside is made by yonestoptech.

famonaco

well i installed the driver , the pc recognize the tablet etc etc, but i can't see nothing about the tablet memory etc etc

thel2dab

I don't think you will see anything as is not a mass storage device.

The next stage is to use iuw burning tool to flash the firmware while its stuck on first boot screen. But first we need to find the firmware.

I read on slatedroid that someone flashed a Yospad firmware to theirs but hasn't linked us to the firmware.

Famonaco do you know anything about over locking kernals???

famonaco

sorry but not i mod the rom,write scripts etc etc but about kernels nope i have my personal kernel pusher(lord) lol
ps: this yospad firmware no one have this???a link, or contact him to link it?

Rabid1

I mentioned this to famonaco, but beware these posts about flashing yospad or any others. If it is the FT4 3g ysopad firmware the hardware is very close, but still it is a risk. Many of the posts you see with "I flashed this and it worked" are fanbois posting crap hoping someone will try it. When they do and it breaks or bricks the pad they run giggling back under their rocks bragging about clones being so crappy that normal firmware breaks them.

Wait until someone gives proof or if you want to be the first to ry go ahead. I killed my fair share of pads, just be ready for it if it happens. And remember when talking to customer service there is no shame in being "TLC" (typical lying customer) and saying all I did was turn it on, but be fair and ask for a replacement, not your money back!!

thel2dab

Ok i take no responsiblity for this but i have been reading the forums and may try to flash later and i think this may be what we are looking for'

Here is the download: MEGAUPLOAD - The leading online storage and file delivery service

The forum i got it from is here: Rom Flytouch 3. 3G modelo Android Tab10
you will need to translate it to english.

The instructions for flashing are:

Ensure sd card formatted to FAT32 you can use this tool just click accept at the bottom of the link to download sd formatting tool https://www.sdcard.org/downloads/formatter_3/eula_windows/

1 - Download file to your PC.

2 - Card microSD card readers connect to a PC.

3 - Copy complete the contents from android folder in the root directory of the microSD card.

4 - Insert the microSD card into the tablet ensure the power supply connected.

5 - Press home + Back + Power it will then as you to press buttons for factory reset - release buttons and press home + back again. It will the load files from sd card

6 - The firmware update is performed automatically.

7 - Remove after performing the update files from the SD card

The first boot will take a long time but it will boot.

Like i said, i have no time to flash now and do not recommend flashing untill you have contacted your seller to make sure you can get the original firmware that they sold the tablet with.

Lee

Last edited by thel2dab; December 31st, 2011 at 07:33 AM.

Danny Backx

My tablet won't install "My Tracks". Can anyone think of a workaround ?

-- Danny

E/PackageManager( 2067): Package com.google.android.maps.mytracks requires unavailable feature android.hardware.location.gps; failing!
W/PackageManager( 2067): Package couldn't be installed in /data/app/com.google.android.maps.mytracks-1.apk

Rabid1

Again this if for so that is the model with the built in 3G. They show pictures of it as well. But Kanjio might be a good place to dig around he made some good basic mods to the Flytouch 3 5V.

thel2dab

hi mate it appears the app looks for android.hardware.location.gps and its unavailable, i think its a hardware limitation.

There may be ways to install it with via adb as it is enabled on our device but i do not know how to use it. Maybe abit of googling 'insatlling apk's with adb' will yeild something.

But even then i may not work and force close also as always possible brick with anything like adb and installing things from pc.

Lee

Last edited by thel2dab; December 30th, 2011 at 11:13 AM.

thel2dab

Well took the plunge and tried it but it just boots as normal, nothing at all.

But i noticed when you press the power and back button it shows a count down screen and counts back from five before booting normally.

Lee

thel2dab

I have edited this post because to load firmware from update sequence you need to press power + Home + back buttons and then the tablet will ask you to press to required buttons for a factory reset, release and press the home and Back buttons again before the coutdown finishes and the tablet will load the files from the sd card. I have done this and can confirm it works on my tab10 without built in 3g. the first boot will take some time.

But please remember this is a base firmware and i do not recommend flashing unless you have problems with your current firmware. But it gives us something to work from.

This will do at least untill my seller reurns from holiday and gives me the original firmware.

Lee

Last edited by thel2dab; December 31st, 2011 at 08:07 AM.

thel2dab

I can confirm this works via flashing but the wifi does not work with this rom.

Maybe il swap kernels from the tab10 firmware and see if the are compatible.

I doubt it tho.

Lee

famonaco

so haven't the same wifi drivers?

Last edited by famonaco; December 31st, 2011 at 08:59 AM.

thel2dab

Firmware in my post with the flashing instructions works fine except it has a network icon in the status bar...... But this one Superpad III Firmware & Tools Download has the wrong wifi drivers.

famonaco

well i'll try it
happy new year

thel2dab

Hi Guys,

This is the best and most up to date firmware i have found. It is a proper TAB10 build and i have tried it and its brilliant, see my previous post for flashing instructions and make sure the sd card is fat32 formatted.

Also its a new build than the one that came on my device.

Also has the Youtube app pre installed and it works pretty well

http://api.viglink.com/api/click?format=go&key=fe637899102546c859ea28a9bbd34b b5&loc=http%3A%2F%2Fwww.slatedroid.com%2Ftopic%2F2 6890-android-tab10%2Fpage__pid__288529%23entry288529&v=1&libid= 1325443033896&out=http%3A%2F%2Fnarod.ru%2Fdisk%2Fs tart%2F34.dl1sg-narod.yandex.ru%2F36101406001%2Fhaf3691708327ea6b8 09e4d2968effa9b%2Fandroid2_3_10inch_gpsImapx_20111 114_android10.rar&ref=http%3A%2F%2Fwww.slatedroid. com%2F&title=Android%20Tab10%20-%20SlateDroid.com&txt=%3Cspan%20style%3D%22font-size%3A%2017px%3B%22%3Eandroid%202.3%2010inch%20gp s%20Imapx%202011-11-14%20android10%3C%2Fspan%3E&jsonp=vglnk_jsonp_1325 4430321025

All credit to 4pda.ru

You will need to possible translate the page but its no problem to navigate.

Lee

Last edited by thel2dab; January 1st, 2012 at 12:38 PM.

Snecer

The link is broken.

Paul25

Hi All i have same spec pad as Snecer . Worked fine for a couple of days ,Now wifi will not connect Keeps trying but and scanning but unable to connect .Tried all the procedures all in vain .Anybody got any ideas HAPPY NEW YEAR ALL

famonaco

yep confirm i can't download the firmware the link is broken

menja

hello guys,

I'm new on the forum witth a superpad III

Numero modele: android tab10
Version d'android: v2.3 2011-09-01(001112)
Version du noyau: 2.6.32.9 root@jackie-desktop#137
Version build: FRF85B

have 2 prbs:
Battery 2hours max...
Wifi prb: I'm connected but impossible to find the page

If you could help me...

TY in advance

thel2dab

Edited the link try now.

Snecer

"direct" link
??????.?????

For download use jdownloader JDownloader.org - Official Homepage to avoid installation of russian plugins in your Internet browser.

Snecer

The file on Megaupload...
MEGAUPLOAD - The leading online storage and file delivery service

2011-11-14
1)change device name to "Android 10"
2)fix the camera image flip problem

Snecer

Some screenshots.

You can see the fake info in settings about OS (Android 2.3).



My desktop:



Android info:

menja

to snecer: so I have a fake...

do you have advices for wifi prb & battery prb?
Change firmware? which one?

Last edited by menja; January 2nd, 2012 at 10:29 AM.