March 10th, 2012, 02:24 PM
Join Date: May 2011
Carrier: Not Provided
Thanked 107 Times in 96 Posts
Originally Posted by _kal_el_
Good afternoon everyone,
I have a Superpad 2 Flytouch 3 with these features:
Model Number: DISCO10
Android Version: 2.2-20110529
Kernel Version: 22.214.171.124 zjd@dtlinuxserver #29
Build Number: FRF85B
So I decided to upgrade to Tim's Rom, the latest one. So I extracted the two files: Firmaware2 and Firmeware-discovery to the root of my SD. I inserted it on my TF slot and turned it on. It updated normaly, I guess but when the system loaded up the screen was all messed up like the picture I show below, its somehow cropped or out of place. If you see the image you'll understand. So I tried the Tim5a and the same happened.
I would be thankful for any help on this subject
Thanks in advance
From SuperPad2 Flytouch3 Tim Rom Tips
Different screen size / Screen offset if you have a 1024x576 screen
As a general rule Do not flash another bootloader onto your pad unless stated otherwise. It is not needed for regular updates.
If you have a x600 screen it should work out of the box with my roms
If you have a x576 screen you will see an "offset" for your screen, simply launch the GScript application, scroll at the bottom and click on the 1024x576 fix. then reboot.
You have to do that only once
If ever it goes wrong, well that means that you have most likely flashed another bootloader before.
Just put the bootloader for your screen and reflash the rom in that case.