If my tablet says that under About device means I can run the firmware update and it should work? (I mean, my tablet is reallyt a flytouch III?)New update specs:
Model number: disco
Android version: 2.2-20110302
Base band version: unknown
Kernel version: 2.6.32.9 zhjun@zhjun-desktop #2
Build number: FRF85B
Nikola.R the processor in the FT3 is listed as ARMv6 compatible processor so I do not believe this is a true ARM11 processor. However if there were a way to tell for sure I'd be happy to test that for you.
Someone posting on android tablets has already dismantled an FT3 and posted some pics. Here is the link: Pix of Inside my dead Flytouch 3
You can see on the first pic that the 2nd SD slot is definitely not present and it has an ARM11 processor (Infotmic X220). Also it highlights (pic 3) how easy it is to upgrade the internal memory because it's only a micro SD card.
Simon, thanks for the link. It actually confirmed my suspicion that the 2nd SD slot was moved internal. That being said I may crack mine open anyway and upgrade the internal SD to 8GB and see about increasing the size of the RAMDisk. Also how in the hell did you read the chip type? I can barely make out INFOTMIC on the top of the chip.
I just assumed the poster had given the correct information in his post.
True the 2nd SD slot has moved inside but it now used for the so called 'NAND Flash' for the OS and built in user storage area.
Hello everyone,
i am newbie on Flytouch. I bought the Flytouch 3 and i was angry, that the AngryBirds did not work "fast" it was slow. I read this Thread and decided to update with the Firmware from this thread. Installing was successfully, at Optionsmenu i saw sometimes chinese characters but everything worked (Angry Birds did run like it should) - Problem is now, that it hang up after a time and i want to turn it back on - it shakes and does not stop shaking this stays as long i press the reset button. Can anyone help me out with that? Is there an older Firmware, which i can download? Thank you, regards
Copied from another url:
Credit goes to Tim.
This seems to be an official firmware update from a vender selling Flytouch 3 Superpad 2.
Flytouch 3 firmware update page.
Thank you for purchasing your tablet PC from me. I am please to be able to offer this update service which will dramatically improve the performance and useability of your flytouch 3 (it was good anyway - now it is awesome!)
You will get :-
Brighter screen
louder speakers
updated market
much faster general performance
better wi-fi performance
better flash performance - (i even got bbc i-player working!)
Youtube - full screen HD - perfect
correct operation of Skype, facebook, Google Maps, Youtube
The list goes on......
Download and save this file to your computer CLICK HERE: http://www.davepallot.com/update_firmware/20110410_Tim2b.zip
-----------------------------------------------------------------------------------------------------
THE ORIGINAL COPY OF THE FIRMWARE WHICH WAS PRE INSTALLED ON YOUR DEVICE CAN BE FOUND HERE. http://www.davepallot.com/update_firmware/original flytouch firmware.zip
IF YOU GET IN TROUBLE JUST RE INSTALL THIS FOLLOWING THE SAME PROCEDURE AS ABOVE.
Initially I did too. My home wireless network is WEP protected, and at first I couldn't get the FT3 with the new firmware update to obtain the IP and connect after entering the WEP code and pressing the "connect" button, which worked flawlessly on the 20110316 firmware that it came with from the factory. What I did was connect to an "open" network first (oddly, some people in my area run their wireless home nets wide open.) then after that I went back & opened up my home network, entered the WEP string, clicked the connect button, and Voila, it obtained the IP and connected with no trouble. I have no idea why this worked for me but it did, and it's worth a try anyhow if all else fails, or perhaps one of the more experienced folks around here has a solution. Good luck.I updated to this firmware and am having trouble with obtaining ip address but with tim 2e i had no troubles why
@hha123Hi. I purchased a SuperPad III that arrived 2 days ago.
The power adapter stopped working after just one day but I have spare that I could use.
The real big problem I have is the G-sensors are messed up. I works when you rotate the home screen but not for games like Labrinyth and racing games - I think the axis are reverse.
Does anyone have the same experience and what is the fix?
hi, confused here getting Flytouch 3 Superpad 2 should arrive next week, what is the latest firmware here ?
20110410_Tim2b.zip
or
20110416-Tim3a.zip
seems its Tim3a but only link to Tim3b on first page ??
Thanks
We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.