In archive CM7_20110309_Milestone.zip:
Update to CyanogenMod 7.1.0 RC8
- RSD Lite 4.9.msi
- GOT_OR.zip
---- OpenRecovery
---- vulnerable_recovery_only_RAMDLD90_78.sbf <vulnerable рекавери>
---- update.zip
- GOT_RTEU_2_2_1FULL.zip
Let's start.
1. Unpack archive CM7_20110309_Milestone.zip .
2. OpenRecovery and the file update.zip from archive GOT_OR.zip is written down in root SDcard.
3. Establish RSD Lite.
4. Start RSD Lite and we wait when the device by it it will be identified or pressed the button "Show Device".
5. Choose vulnerable recovery vulnerable_recovery_only_RAMDLD90_78.sbf , unpacked of archive GOT_OR.zip .
6. When phone will be defined we press the button "Start". The reinsertion will begin.
7. Wait for the operation termination. Attention: in the course of an insertion a body will reboot so be not frightened.
The Following point is especially important!!!
8. Now we include phone with the holded button "X" on the keyboard and when on the screen there will be a yellow triangle (Pic1), hold "loudness upwards " and holding it we press the button "the chamber". In the bootloader menu choose point "apply sdcard: update.zip" (Pic2). I congratulate, you have got in G.O.T. OR which have established at the very beginning of this description. Choose point "nandroid " (Pic3), then "backup " (Pic4), we choose all sections of memory and we start archiving (Pic5). I advise always to do full backup, in avoidance of conflicts of sections. If something goes not so to restore system it will be possible through point "restore".
Reboot Milestone.
Pic1.
Pic2.
Pic3.
Pic4.
Pic5.
9. Start RSD Lite and wait when the device by it it will be identified or pressed the button "Show Device".
10. Choose GOT_RTEU_2_2_1FULL.sbf , unpacked of archive GOT_RTEU_2_2_1FULL.zip.
11. When phone will be defined press the button "Start". The reinsertion will begin.
12. After an insertion phone will be loaded, but it not is CyanoGen Mod7. Switch off the Milestone.
13. Now include phone with the holded button "X" on the keyboard and when on the screen there will be a yellow triangle (Pic1), we hold "loudness upwards" and holding it we press the button "the chamber". In the bootloader menu choose point "apply sdcard: update.zip" (Pic2).
14. Choose menu point Run Script (Pic6) and trace wipe_system.sh (Pic7)
Pic6.
Pic7.
15. From the main menu choose Apply update (Pic8)
16. Choose update-cm-7.0.0-RC3-0.07-11.03.09-Milestone-signed (Pic9)
17. In the same menu (Pic9) choose gapps-gb-20110307-signed
18. Reboot device.
19. In case of lag of the device expressed in animation loaded CyanoGen Mod7 during well of very long time, be loaded in OpenRecovery and execute wipe - they there should be made all 3 pieces.
Pic8.
Pic9.
Update to CyanogenMod 7.1.0 RC8
- RSD Lite 4.9.msi
- GOT_OR.zip
---- OpenRecovery
---- vulnerable_recovery_only_RAMDLD90_78.sbf <vulnerable рекавери>
---- update.zip
- GOT_RTEU_2_2_1FULL.zip
Let's start.
1. Unpack archive CM7_20110309_Milestone.zip .
2. OpenRecovery and the file update.zip from archive GOT_OR.zip is written down in root SDcard.
3. Establish RSD Lite.
4. Start RSD Lite and we wait when the device by it it will be identified or pressed the button "Show Device".
5. Choose vulnerable recovery vulnerable_recovery_only_RAMDLD90_78.sbf , unpacked of archive GOT_OR.zip .
6. When phone will be defined we press the button "Start". The reinsertion will begin.
7. Wait for the operation termination. Attention: in the course of an insertion a body will reboot so be not frightened.
The Following point is especially important!!!
8. Now we include phone with the holded button "X" on the keyboard and when on the screen there will be a yellow triangle (Pic1), hold "loudness upwards " and holding it we press the button "the chamber". In the bootloader menu choose point "apply sdcard: update.zip" (Pic2). I congratulate, you have got in G.O.T. OR which have established at the very beginning of this description. Choose point "nandroid " (Pic3), then "backup " (Pic4), we choose all sections of memory and we start archiving (Pic5). I advise always to do full backup, in avoidance of conflicts of sections. If something goes not so to restore system it will be possible through point "restore".
Reboot Milestone.
Pic1.
Pic2.
Pic3.
Pic4.
Pic5.
9. Start RSD Lite and wait when the device by it it will be identified or pressed the button "Show Device".
10. Choose GOT_RTEU_2_2_1FULL.sbf , unpacked of archive GOT_RTEU_2_2_1FULL.zip.
11. When phone will be defined press the button "Start". The reinsertion will begin.
12. After an insertion phone will be loaded, but it not is CyanoGen Mod7. Switch off the Milestone.
13. Now include phone with the holded button "X" on the keyboard and when on the screen there will be a yellow triangle (Pic1), we hold "loudness upwards" and holding it we press the button "the chamber". In the bootloader menu choose point "apply sdcard: update.zip" (Pic2).
14. Choose menu point Run Script (Pic6) and trace wipe_system.sh (Pic7)
Pic6.
Pic7.
15. From the main menu choose Apply update (Pic8)
16. Choose update-cm-7.0.0-RC3-0.07-11.03.09-Milestone-signed (Pic9)
17. In the same menu (Pic9) choose gapps-gb-20110307-signed
18. Reboot device.
19. In case of lag of the device expressed in animation loaded CyanoGen Mod7 during well of very long time, be loaded in OpenRecovery and execute wipe - they there should be made all 3 pieces.
Pic8.
Pic9.