Help SuperPad III Model: Android Tab10 Build FRF85B AV:v2.3 2011-09-19(001112)Kernel 2.6.32.9 #79

[famonaco]

hi guys, i think that is usefull have an official thread for who bought this fake superpadIII
enjoy

 

[famonaco]

so no one have this superpadIII version????

 

[bouoy]

Yes I have 4 of them I got from the factory. I've been tryign to flash and upgrade the firmware with no luck.

 

[famonaco]

Yes I have 4 of them I got from the factory. I've been tryign to flash and upgrade the firmware with no luck.

hi, exist a tablet with the same hwr info to try a mod firmware???
see ya

 

[bouoy]

I've been trying but noone answers posts. or offers simple help. Ive done all the things talked about mine won't boot to the sd card. just skips and loads orginal OS

 

[dart16]

I've been trying but noone answers posts. or offers simple help. Ive done all the things talked about mine won't boot to the sd card. just skips and loads orginal OS

That's probably because no-one has any info for you. The tab 10 is a very new release and there is zero support available for them (along with about 5 other new models that are surfacing now)

Contact the seller and ask them, but expect either no reply or that there is no other firmware available.

 

[famonaco]

That's probably because no-one has any info for you. The tab 10 is a very new release and there is zero support available for them (along with about 5 other new models that are surfacing now)

Contact the seller and ask them, but expect either no reply or that there is no other firmware available.

yes probably but the question is : have another rom for a tablet with imapx200 , screen x600, armv6 , so i can try to port the firmware for our tablet
thx in advance

 

[dart16]

yes probably but the question is : have another rom for a tablet with imapx200 , screen x600, armv6 , so i can try to port the firmware for our tablet
thx in advance

Yes.....

SuperPad2 Flytouch3 Hybrid Tim Rom

FlanFlingers FunnyComb Beta

FLYTOUCHFIRMWARE PO41 SILVER MODEL 27TH SEPTEMBER - SlateDroid.com

P041 Hybrid ROM (rooted). - SlateDroid.com

 

[thel2dab]

Hi.

I have this tablet and maybe of some assistance if someone is looking to
Port a custom rom.

Lee

 

[famonaco]

Yes.....

SuperPad2 Flytouch3 Hybrid Tim Rom

FlanFlingers FunnyComb Beta

FLYTOUCHFIRMWARE PO41 SILVER MODEL 27TH SEPTEMBER - SlateDroid.com

P041 Hybrid ROM (rooted). - SlateDroid.com

wow all these are for tablets with the same technic caratheristics?

 

[famonaco]

Hi.

I have this tablet and maybe of some assistance if someone is looking to
Port a custom rom.

Lee

well i'm an htc desire hd modder, maybe i can try to port one of them for us but i have only a doubt........these firms are for tablets with the same technical speech???

 

[thel2dab]

well i'm an htc desire hd modder, maybe i can try to port one of them for us but i have only a doubt........these firms are for tablets with the same technical speech???

Yes I think one of the differences is that ours is a 9 volt and is a new model. Also while the about phone in settings says android 2.3 the build prop says android 2.2.

May its best we try and do some kind of nandrioid backup or obtain the manufacture firmware and try to incorporate some of the changes included in the other custom firmwares rather than trying to port a firmware not designed for our hardware.

Lee

 

[thel2dab]

or if our hardware is similar maybe its the way of tablet updates that's different and that's why it won't accept the other custom firmwares.

Lee

 

[famonaco]

Yes I think one of the differences is that ours is a 9 volt and is a new model. Also while the about phone in settings says android 2.3 the build prop says android 2.2.

May its best we try and do some kind of nandrioid backup or obtain the manufacture firmware and try to incorporate some of the changes included in the other custom firmwares rather than trying to port a firmware not designed for our hardware.

Lee

yes maybe is an idea but only our tablet is 9 volt??? yes our firm is android 2.2 , can u send an email to our manufacturer?

 

[Snecer]

I have also Android tab10.

V2.3 2011-11-11 (001112)
2.6.32.9 root@wanghua-desktop #206
FRF85B

Everything works fine for now, there is no need for a new rom.

GPS Navigation works normally (Navigon 4.0.1, iGO-only in 960x, Copilot, Sygic) Google Maps, Latitude, but not Earth.

Android market works full (after some changes in settings, usual bug in superpads)

The device is rooted with z4root program like other Superpads.

Wifi, Lan and camera, youtube etc. are also fully functional

 

[famonaco]

I have also Android tab10.

V2.3 2011-11-11 (001112)
2.6.32.9 root@wanghua-desktop #206
FRF85B

Everything works fine for now, there is no need for a new rom.

GPS Navigation works normally (Navigon 4.0.1, iGO-only in 960x, Copilot, Sygic) Google Maps, Latitude, but not Earth.

Android market works full (after some changes in settings, usual bug in superpads)

The device is rooted with z4root program like other Superpads.

Wifi, Lan and camera, youtube etc. are also fully functional

very nice, can u post this firmware????
thx in advance

 

[famonaco]

Tim6a or FunnyComb will not work on the Superpad III aka 9v Flytouch 3 clones. You need a Disco10 unit. Anything else will no run these wonderful roms.

porting a firmware from another pad with the same caratheristic isn't so hard but i'm new with tablet....not android rom so i'm trying a firm for another pad with the same caratheristics of our tablets
cheers

 

[Snecer]

very nice, can u post this firmware????
thx in advance

How, its original on the tablet?

 

[famonaco]

How, its original on the tablet?

see the title mate well on the title u can see my firm

 

[Snecer]

I must be blind.

 

[lennyratz]

LOL... good luck with your Clone mate.

 

[famonaco]

I must be blind.

Android Tab10
Build FRF85B
AV:v2.3 2011-09-19(001112)
Kernel 2.6.32.9 #79
arm 6
hwr imapx200
screen x600


merry christmas guys

 

[famonaco]

LOL... good luck with your Clone mate.

lol

 

[Snecer]

Android Tab10
Build FRF85B
AV:v2.3 2011-09-19(001112)
Kernel 2.6.32.9 #79
arm 6
hwr imapx200
screen x600


merry christmas guys

I did the same in post #15
The screen resolution is 1024x600, but I dont know about the cpu type, must be the same as yours.

 

[famonaco]

I did the same in post #15
The screen resolution is 1024x600, but I dont know about the cpu type, must be the same as yours.

mine is arm6 check with system info