Root {PORT} Behold 2 Stock ( No Twiz w/ Root & Busybox )

[BH_MAN]

First off I want to thank these Dev. for there hard work..
Kam187, Mastermind278, droiddev, mobileband, My420Time, rkhalil2009, Nu11u5

You Must Un-zip the Package First!
Then Load the .md5 into PDA in Odin Flasher
​

ODIN Install Ready. Updated Build to T939UVIJ6
Download here > BH-MAN-ODIN.tar.zip

Change Log:
- No Factory Reset Required after Installed!
- Galaxy Bootup Screen.
- Modded Shut Down Screen
- Added The Internet Speed Boost Hack to Build.prop ( Confirmed Working ).
- Removed Cube Launcher
- My Faves's Removed
- New Kernel - Rooted & SU Permission Fix.
- New Wallpapers ( Android Pictures ).
- New's & Weather ( Back ported to 1.5 ) Non-Paid App!
- Better Terminal Free edition. ( Landscape does not work. )
- BH2 Mms added back for Picture MMS to work correctly.
- Optimized Entire Build.. ( Optimize Mean's Compressed Images to load Faster ).
- Galaxy Setting.apk
- Framework-res.apk Is now Mostly Stock Android Color's
- Galaxy Switchers.apk ( Turns on BT / WiFi / GPS / Sync ).
- New Ring Tone's
- New Notification Tone's
- Cube Button is Remapped to Search ( My Preference ).
- Bloat ware Removed again
- Root for App's via kernel
- Persistent Root via kernel
- Advance Launcher that I merged with TwLauncher ( With Personal Touches )
- Galaxy Launcher ( With Personal Touches & Home Screen Does not Rotate, Some Prefer this ).
- Busybox Installed
- Likely Stuff I forgot*
- If I didn't mention Something in the Change Log, then there was a Reason For it, so Don't go Posting about it.

Trouble Shooting ODIN Flasher

Okay let me help you step by step!

1. Open up Odin Multi Download
2. Under Select OPS, choose Behold2_partition.ops
3. Click PDA, choose T939UVIJ6-PDA-CL81521-REV1.tar.md5
4. Power Off Phone
5. Make sure you have it connected via USB
6. Hold and Press Volume Down, OK, Power (the red end button)
7. Phone will say Download Mode
8. Click Start on Odin Multi Downloader.
9. Wait a couple of minutes
10. Stock Touchwiz phone working again!

The ODIN Files and orignal firmware can be downloaded from the following link: http://shrunk.me/uvij6.zip

*Everything Below is Out Dated!*
​

* Download Here > BH2_No_Twiz_UPDATE.zip
WiFi FIX For the Older Kernel!
* Download bcm4325.ko
Place the File on the sdcard of the Behold 2 ( Don't Forget to Un-mount after )
Now we Open cmd prompt & type the Following

adb shell
cat /sdcard/bcm4325.ko > /system/libmodules/bcm4325.ko

Remember this is For the Older Kernel. So, If your wifi no longer works, follow these Directions

Back To Stock TwMms
Original TwMms TwMms.apk
Place onto your sdcard ( Un-mount )
then do the Following

adb shell
cat /sdcard/TwMms.apk > /system/app/TwMms.apk

Change Log: Using The New File's.
- Added The Internet Speed Boost Hack to Build.prop ( Confirmed Working ).
- Removed Cube Launcher
- My Faves's Removed ( Removing the Call Function was a Pain, as it Crashed the System looking for it ).
- New Ring Tone's
- New Notification Tone's
- Galaxy Mms.apk
- Cube Button is Remapped to Search ( My Preference ).
- Device Manager is Removed ( Sorry, but Pointless in a Custom Rom ).
- Removed Most of Samsung's Call Home app's
- Bloat ware Removed again
- Root for App's via kernel
- Persistent Root via kernel
- Removed Amazon
- Removed Widget Pack
- Batterystat.bin is auto removed for Better Life. ( You will See a New Time stamp Per Boot! )
- Still Using Advance Launcher that I merged with TwLauncher ( With Personal Touches )
- Busybox Installed again
- Likely Stuff I forgot*
- If I didn't mention Something in the Change Log, then there was a Reason For it, so Don't go Posting about it.

* Download the Package here > BH2_No_Twiz.zip
Change Log / Int. Release.
Included & working in rom Plus hassle free install is>
- Pre installed Busybox
- Galxay Mms.apk
- Removed TwMms.apk
- Root for App's
- Widget Pack
- Merged Advance Launcher w/ Twiz Launcher.
- Persistent Root script pre installed
- US by Default
- English By Default
- Bloat Ware Removed.

-Bugs Known
- USB Debugging needs turned off, then back on after each re-boot for adb to work..

Now, I've spent a lot of time in making it less difficult for everyone to install the Rom & hope everyone like's it.

Once download is complete, un-zip the items to the SDcard on your Behold 2.

Now for the Install procedures.
Do the Following one Line at a time...

Install Key * Is For Old Install * is For New Install!!
Step 1.

adb shell
cat /sdcard/try3 > /data/local/try3 **
chmod 777 /data/local/try3 **
/data/local/try3 /system/bin/sh **

Step 2.

mount -o rw,remount /dev/st9 /system **
cat /sdcard/unyaffs > /data/local/unyaffs **
chmod 777 /data/local/unyaffs **

Step 3. Wait for the # sign after /data/local/unyaffs /sdcard/system Before Rebooting

cd /system **
rm -R app **
rm -R framework *
rm -R lib *
/data/local/unyaffs /sdcard/system **
reboot

That's it, after you get the # from running /data/local/unyaffs /sdcard/system it's now safe to reboot...

Now, once you have Rebooted, Do a Factory reset by, Menu>Settings>Sd card & Phone Storage>Factory Data Reset Enjoy!

Trouble Shooting!

Stuck on Samsung Logo..

You Need to Do this First Before Pushing this system File over.... You can't have the Galaxy Rom installed Prior to installing this...


Pictures Running.

------
Original method/discussion for Galaxy system on Behold 2
http://androidforums.com/samsung-behold-2/35487-galaxy-stock-android-behold-2-flies.html

 

[yatimameiji]

If Vibration doesnt work and Camera app still reporting firmware error, you should add that to known bugs.

 

[BH_MAN]

If Vibration doesnt work and Camera app still reporting firmware error, you should add that to known bugs.

If it didn't work, I would have added it! Post Title Say's Stock!

 

[behold_this]

first off thanx for all your hard work. i did have a couple questions though. is this rom any faster than with touchwiz? are the only changes are no/edited touchwiz launcher and the mms apk? what kind of speeds are you getting, good? i actually like the sound of this rom much better than the galaxy rom if it runs faster than stock.

 

[BH_MAN]

first off thanx for all your hard work. i did have a couple questions though. is this rom any faster than with touchwiz? are the only changes are no/edited touchwiz launcher and the mms apk? what kind of speeds are you getting, good? i actually like the sound of this rom much better than the galaxy rom if it runs faster than stock.

The Speed are alot Better, but Currently Not played with it to much...

Working on the 1.6 image now of the galaxy rom... Hoping I can come up with something worth wild!

 

[behold_this]

thanx for the quick reply. awesome work man, just awesome!

 

[texasmade]

do you know of a walkthrough to revert to stock with the touch wiz overlay so i can sell my phone

 

[Mastermind278]

do you know of a walkthrough to revert to stock with the touch wiz overlay so i can sell my phone

Okay let me help you step by step!

1. Open up Odin Multi Download
2. Under Select OPS, choose Behold2_partition.ops
3. Click PDA, choose T939UVIJ6-PDA-CL81521-REV1.tar.md5
4. Power Off Phone
5. Make sure you have it connected via USB
6. Hold and Press Volume Down, OK, Power (the red end button)
7. Phone will say Download Mode
8. Click Start on Odin Multi Downloader.
9. Wait a couple of minutes
10. Stock Touchwiz phone working again!

The ODIN Files and orignal firmware can be downloaded from the following link: http://shrunk.me/uvij6.zip

 

[BH_MAN]

do you know of a walkthrough to revert to stock with the touch wiz overlay so i can sell my phone

Restore With the Odin File, I think the link is Posted in the Galaxy Thread in the Sticky.


By the Way, you only need to Load the Behold 2 .ops File & the PDA file

 

[deathclutch]

-Bugs Known
- USB Debugging needs turned off, then back on after each re-boot for adb to work..

i had that problem on stock android... i plan to odin to stock and try booting this up tonight, has one done this yet?

 

[tritran18518]

@BH_MAN: do you check the alarm set up in this rom ?

 

[bukhsyed]

guys i have asked this on a couple of forums but no replay i was just wondering if there is an easy basic guide to learn the cooking of the rom process, i have a Behold that i can experiment with ( a nexus one as well but i like to keep both of my N1 safe ) but i am not really sure where to begin to cook a rom or even look at it, if there is an example, video tutorial or if someone can create a video tutorial (i know it would be hard) that would make alot of people understand and share development (or atleast i would).
Oh Lords of the Tech please hear my voice and send a tutorial from the heaven

 

[shawn1224]

Okay so I decided to run BH2 no TW/stock and everything seems to be working fine. It takes a little while for it to load up like the app drawer but it's pretty fast once it does. The camera had a little lag on the 1st test run but it looks pretty solid now. The funky cube interface is still there but I guess that's to be expected until we can get it remapped.

- Text messaging solid

- Vibrate works

- no firmware update on Camera

- New advanced launcher wallpaper gallery, which is pretty sweet

- So far the phone flies like Galaxy stock

BH Man you put some hard work into this and it has paid off, thanks.

 

[shawn1224]

Okay, I found a bug.

Can't download from market. It just continuously stays on the download bar showing no progress. I tried with 3G and wifi turned on and both had the same results.

 

[BH_MAN]

@BH_MAN: do you check the alarm set up in this rom ?

Alarm is working Fine... I've been So wrapped around Merging the 2 Launcher's I've not had to much time to fix the other Rom.

 

[BH_MAN]

Okay, I found a bug.

Can't download from market. It just continuously stays on the download bar showing no progress. I tried with 3G and wifi turned on and both had the same results.

Did you do a factory Reset? If so... Power off then Power on, I had a weird moment like that as well, and another reset fixed it.

 

[shawn1224]

Yea I did a factory reset and powered off once after that. I'll try once more and see what happens.

 

[shawn1224]

After 2nd power recycle it's working now. Had to get taskiller running to see how much available RAM. At the moment I'm running about 21 processes and it's reporting 107MB free.

so far so good.

 

[tritran18518]

@shawn1224: how about battery ?

 

[shawn1224]

I'll probably need to run it for a full day to see how battery life is. Right now it's at 77% but I've had it charging on and off throughout the day.

I'll check back in a few hours and let you know where I am at.

 

[shawn1224]

Been playing with it last 20 mins ... downloaded a few apps ... got in some SNESoid legend of Zelda .... changed wallpapers ... surfed 1 or 2 sites.

Battery is at 76% ... sweet.

 

[tritran18518]

great sound ^^ My BH2 run out 20% battery ( from 60% to 40%) in 1 hours..

 

[spinwizard]

This is great! Now I'm using this version now. Got the camera , the cube, 1.5 UI Thanks! Are the try3 and the unyaffs changing in each build?

 

[BH_MAN]

This is great! Now I'm using this version now. Got the camera , the cube, 1.5 UI Thanks! Are the try3 and the unyaffs changing in each build?

No, but I'm including them in case a New user see the Post & tries it... Much better to have the tools included so they don't have to search for them in a Separate post is all.

 

[BH_MAN]

Well, I'll be back shortly, Going to work on the 1.6 image of the new Dump.. Hope I bring good New's..