Root Scatter file from Mito with 233 MB internal memory

[siguetea]

its been three days almost every hour I visited aayush site , just to check whether the CeltICS v1.1 released or not, but its not yet released until now, so while waiting for the v1.1 released, then I browsing around to kaskus and found this posted by kujang_1
the link contain the scatter file from Mito, new rom of Gionee and new rom of IQ270. I have try flashing the roms using SP Flash Tool, and I got larger space for internal memory (233 MB), 5 MP camera with no bugs, support ext2 (I also have try this), wifi works fine (tested using connectify), I haven't tested the other function, and about the UI, its standard, and the launcher is using Sony Xperia.
Unfortunately the scatter file from mito is not work when flashing the recovery by varun, hope somebody can develop the recovery to make it work with scatter file from mito.
the rom IQ270 also has been cleaned up by kujang_1, its to make the rom can be recognized by the scatter file.

Method : extract the Gionee rom and then replace the system.img with the system.img from IQ270 and replace the scatter file with scatter file from mito then flash using SP Flash Tool

here is the download links :
scatter mito
GN105_T39_C
Root_and_Clean_FLyIQ270

credit goes to kujang_1 from kaskus

 

[aayushdutta]

Bro, as far as I know, The scatter file is just a Memory Heap Definition (MHD) file which tells the SP Flash Program, that in which section/memory heap of the NAND a particular file has to be put. It does not deal with increasing the Internal Memory capacity.

As you've said in your OP that we must replace the stock system.img with that gionee system.img, so the trick which made the space go larger was the APPS Data Section growing smaller. As the APPS released the memory being used by them. The space increased just showing 181Mb Free!

Hope I was correct, any objections to this theory are most welcome....

 

[bara3239]

Its great ... It really works ...used it all day long .. no issue yet, not a single application crashed yet

 

[saivignesh]

@aayush I got 233mb free space when i used mitto scatter
when I used the same system.img with mmx scatter it fallen back to 158mb

 

[siguetea]

Bro, as far as I know, The scatter file is just a Memory Heap Definition (MHD) file which tells the SP Flash Program, that in which section/memory heap of the NAND a particular file has to be put. It does not deal with increasing the Internal Memory capacity.

As you've said in your OP that we must replace the stock system.img with that gionee system.img, so the trick which made the space go larger was the APPS Data Section growing smaller. As the APPS released the memory being used by them. The space increased just showing 181Mb Free!

Hope I was correct, any objections to this theory are most welcome....

I'm not really sure too that the scatter file will take effect to internal memory capacity, but based on my experience, when I first bought Mito phone, I noticed that the total internal memory is 233mb, but when I flash my phone using rooted UB_A75 by ninad the internal memory decrease to 168mb.
I also have try flashing several rom with default scatter file that come with the rom and the result is the total internal memory no more than 170mb, if I'm not forget, the gionee rom has 170mb internal memory, and UB_A75 168mb.
but when I try the scatter file from mito the total internal memory increase to 233mb.
233mb is the total internal memory, if you see the scshot on OP 181mb is the free space after I install many apps, but you can see that there the used space 52mb so total is 233mb.
if you try the roms on OP, when on fresh flash you will get 217mb free space and 15mb used space.
Bro, I'm not a developer but hope this information will help you to build more great rom.

 

[saivignesh]

@siguetea have u got 168mb free space with ub rom?
surprise
coz my internal memory after flashing ub-1 is about 110mb

 

[siguetea]

@siguetea have u got 168mb free space with ub rom?
surprise
coz my internal memory after flashing ub-1 is about 110mb

I mean 168mb is for total internal memory (free and used) when using ub, not free space.

 

[saivignesh]

ok I am gonna try silverlight rom with these files

mastermind's recovery works fine for me

try that

 

[bara3239]

I tried the following:
1. Installed Link2SD
2. Flashed the recovery by varun- Successfully done
3. Created Partition- Ext2 using recovery[1 GB]- Successfully done
4. Opened Link2SD -> Mounted Partition-> Reboot Phone
5. You r DONE....
Enjoy the extra space
233MB on Internal and 1GB as Ext2

Friends Tried it out

 

[siguetea]

@saivignesh & bara3239 : guys, are you sure that both varun and mastermind recovery works fine?
I have try two times install the recovery, its works for the first time but then my phone dead after several reboot, so I need the format + download method using SP flash tool to make it back on.. please confirm..

 

[saivignesh]

wow finally I have bricked my device
"deader than elvis"
anyway format+download. option worked fine


best tool to write imei?
I have done that via anarchy rom engineering mode
any other tool?

@siguetea. yes u r right recovery murdered my a75

 

[kujang]

wow finally I have bricked my device
"deader than elvis"
anyway format+download. option worked fine


best tool to write imei?
I have done that via anarchy rom engineering mode
any other tool?

@siguetea. yes u r right recovery murdered my a75

Use terminal emulator or adb shell

echo 'AT+EGMR=1,7,"your imei 1"' >/dev/pttycmd1
echo 'AT+EGMR=1,10,"your imei 2"' >/dev/pttycmd1

No need any tool

 

[bara3239]

hi siguetea,

Follow the steps

1. Flash using the default recovery as provided in the GN105 folder

a. just replace the scatter file with Mito scatter file
b. System.img with the system.img from the Root_and_Clean_FLyIQ270 folder

2. Boot the phone -> Let the phone boot and wait it home screen is displayed
3. Switch off the phone
4. Flash using Varun's recovery
5. Start the phone

That's it

 

[varun.chitre15]

Lolz...why you guys are using SP flash tool to flash recovery.
Use the 'Safest method' I posted, it wont harm your A75 101% sure

 

[saivignesh]

lol I dont even knew about that method
gonna try that

 

[saivignesh]

lolzzzzzz omg omg
I again bricked my a75
varun I followed that method to install recovery
everything worked fine but when I installed zip from cwm
splash. my phone is dead
and again format+download. worked fine


@varun pls develop cwm for gionee img files

 

[avinashmeena]

lolzzzzzz omg omg
I again bricked my a75
varun I followed that method to install recovery
everything worked fine but when I installed zip from cwm
splash. my phone is dead
and again format+download. worked fine


@varun pls develop cwm for gionee img files

which sp tool version you are using my version does't respond on format+download option

 

[saivignesh]

bro at first attempt it will not work
then u got to remove the battery and reinsert it again
now click on format+download it will and should work
tried 3 times

 

[avinashmeena]

bro at first attempt it will not work
then u got to remove the battery and reinsert it again
now click on format+download it will and should work
tried 3 times

Which os you are using

 

[saivignesh]

win xp. and it should also on work win7

 

[bara3239]

Issues Faced:
1. Internet via SIM not working -the devices does not display the neither H or E sign

Any Solution Guys

 

[saivignesh]

lol !!u got u add apn
access point names
THERE IS NOT EVEN A SINGLE ISSUE IN THIS ROM

 

[bara3239]

This is really a very good ROM....

 

[siguetea]

Guys, I just wanna share that Mito now has CWM, it will work with scatter file from mito that has larger internal memory.
but be carefull this cwm will not work when flashing using rom that using boot.img from mmx.
I have try flash Blue Terror rom with this mito cwm, and the result is its stuck on boot logo, but then I try the newbie way , replacing the blue terror boot.img file with boot.img file from Gionee or Mito then the result is ITS WORKS!, now I have Blue Terror rom using Mito scatter file.

Note : I have try this cwm recovery file using mmx firmware and its stuck on boot, but its works fine with Gionee firmware, maybe its because of boot.img on both firmware recognized different by the cwm recovery file.

here is the link : recovery.img - 4shared.com - online file sharing and storage - download

Thanks to :
- kujang and sangsaka (from kaskus) for providing cwm mito
- aayushdutta for great amazing rom

 

[saivignesh]

thanks alot
1000 thanks