• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

What is eMMC Brickbug?

glore2002

Well-Known Member
Jan 31, 2012
174
4
Buenos Aires, Argentina
Hello!

This is something I've read in other thread but I don't understand it clearly. I ran eMMC Check app (from play store) to check my device and got this results:


eMMC chip
Type VYL00M
Date: 09/2011
etc.

Brick Bug?
Yes, insane chip.

Then I checked memory and it said congrats test passed or something like that.

Now I am running NEAT ROM Lite (the last one 1st of July).

What does this mean? Is there anything wrong? What should I do to make sure everything is ok?

Does it mean I should only flash Siyah or Chainfire kernels and avoid unknown ones?

Thanks in advance,
Glore2002.-
 
So, what should I do?
Is there anything to flash to fix this brick bug?
Thanks my friends.

No, either your emmc chip is susceptible to this bug or it isn't. Its a hardware issue.
You can run a GotBrickBug? app that will tell you this.
If this app says your clear, then you have nothing to fear.
If it says you have the bug (and it probably will, as most GS2's are open to it), you have nothing to fear unless you install a rogue kernel and you do any sort of wipe or restore.
 
  • Like
Reactions: glore2002
Upvote 0
If your GS2 is prone to the emmc bug (check with the GotBrickBug? app) then the bottom line is, you are susceptible.

2 things are required to trigger the brick:

1. You have flashed a rogue kernel that has MC_CAP_ERASE=1
2. You subsequently perform any sort of wipe (eg. cache, dalvik, factory reset) or restore via CWM Recovery whilst still on this rogue kernel.

It's possible, and I emphasise possible, that wiping via GS2ROMNuke whilst on a rogue kernel will not envoke the bug, as my script is built with old GB update-binary. I cannot say this for definite, as my gonads are simply not big enough to test it out for you guys!

Rule of thumb is:
1. Stick to kernels you know. (eg. Siyah). Obviously there is still an element of risk, as Gokhan got caught out a couple of months back, and now more recently with this 4.0.4 release, chainfire, although all he does is bundle Samsung kernels with busybox etc in order to root. Bottom line is the finger will invariably point back to Samsung when things like this go wrong.
2. Let the dust settle before new kernel/android releases come out. Flash ROM's to your heart's content, but when a ROM comes out that is on a new base, or on a leaked or untested kerne, then let others find out the worst for you! I know its hard not to just dive in, but there will always be instant flashers out there, so let them sort out the wheat from the chaff.
 
Upvote 0
They are all safe as long as you dont use CWM after flashing to wipe/restore.

But there have been reports of the problem in LPM however, so my advice is to avoid for the time being.

So if I install it and want to go back to any nandroid previous version I am in trouble? If so, as you said, better wait until a safe ROM is released.
Thank you. Hawker, you are a kind of master of the Universe for the rest of us. Again, thanks!
 
Upvote 0
You could be.
Install Chainfire's GotBrickBug? application to see if your chip is susceptible to the bug or not. (this checks the chip itself, and has nothing to do with whatever your current kernel happens to be)

If it says your ok, then you can do whatever you want.

If it says you are at risk, it doesnt mean you will brick your device on next CWM restore/wipe, but there is certainly a good chance. As long as you have a duff kernel installed with LPM, the more CWM wipes/restores you perform with it on, the bigger the chance of bricking. It could happen on the very first wipe, or it may brick a few wipes down the line.

Bottom line is, unless GotBrickBug says your clear, DO NOT RISK IT!
 
  • Like
Reactions: glore2002
Upvote 0
You could be.
Install Chainfire's GotBrickBug? application to see if your chip is susceptible to the bug or not. (this checks the chip itself, and has nothing to do with whatever your current kernel happens to be)

If it says your ok, then you can do whatever you want.

If it says you are at risk, it doesnt mean you will brick your device on next CWM restore/wipe, but there is certainly a good chance. As long as you have a duff kernel installed with LPM, the more CWM wipes/restores you perform with it on, the bigger the chance of bricking. It could happen on the very first wipe, or it may brick a few wipes down the line.

Bottom line is, unless GotBrickBug says your clear, DO NOT RISK IT!

I am in risk so I wont flash yet. Thanks!
 
Upvote 0
Hello all

I have installed the 'got brickbug' app onto my 'note' today and it comes back with the message:

eMMC chip

type:VYL00M
CID:15010056594c30304d19bf535e873f5d
Revision: 0x19

Verdict:

DANGER ! This eMMC chip is *KNOWN* to have the brick bug !

I haven't rooted it or flashed another ROM onto it and quite frankly I'm not sure what to do?

Do I need to send it back to Samsung or how do I change the status of the eMMC chip to *SAFE* ?

What limitations are there with this Galaxy Note I have?

I don't want to brick it and have to send it back and wait weeks for it to be returned.

Thanks for reading.
wink.gif
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones