Ring count

[John58543]

Does anyone know how to change the amount of times their phone rings before the caller is sent to voicemail? When I call my phone from another phone it only rings four to five times before it goes to voicemail. However, when I call my wife's eris it rings six to seven times before sending to voicemail....

My phone is on v3 leak and my wifes is a stock 1.5.

This is really frustrating because it already takes at least two rings from the other end before my phone even acknowledges someone is calling...and yes i've changed my slot cycle down to zero...so by the time it starts ringing the ringtone only lasts about five to ten secs...not enough time at all to even try to answer...

Anyone have any ideas or suggestions?

Thanks in advance.



Sent from my Eris using Tapatalk

 

[redplate]

I noticed that when I grabed the leak 2. It is really annoying. I find myself rushing to grab my phone so it doesn't go to voice mail. My eris has pretty much been a pager since I switched from 1.5

 

[Zerethusta]

I'm at slot cycle 1, never miss calls. Usually sit there hemming and hawing over whether I want to answer it in the first place too.

Anyway, I believe it's a voicemail setting, as in when you call in to the voicemail number and set up your name etc.

 

[John58543]

Zerethusta, are you on a leaked version of 2.1?

 

[Zerethusta]

Yup, v3. Had 'em all, same way each.

 

[redplate]

I just installed V3 about 10 minutes ago. I was running v2 when I had the issues

 

[John58543]

Bump...can anyone offer suggestions on how to fix this?



Sent from my Eris using Tapatalk

 

[jimigood]

this might be a dumb?, but how do you set that? I have looked and can't find the answer. Thank you

 

[Frisco]

this might be a dumb?, but how do you set that? I have looked and can't find the answer. Thank you

Change the slot cycle by going to phone and dialing ##778 as if making a call.. press "call" then wait a bit.. then "edit mode," then "000000" as the password, then "modem," then "slot cycle index."

Make your setting, then don't forget to press menu and save your settings. It'll reboot.

 

[jimigood]

Ok. Did it. I picked slot 1. Is this good? What is the best slot? I was on 2.

 

[Frisco]

Ok. Did it. I picked slot 1. Is this good? What is the best slot? I was on 2.

Battery life is impacted by the lower settings, as those settings cause the device to poll cell towers more frequently for input/calls.

The differences are in seconds and fractions thereof.

Mine has been set on 0 for months, however, and I've found that other battery saving measures make up for the increased usage of the low slot cycle setting.

 

[lg4420]

I have tried the ##778 and nothing is happening, doesn't appear to be rocket science! 2.1v3

 

[bberryhill0]

Did you hit Call?

I changed my Slot Cycle to zero but it didn't seem to change anything. My phone usually only rings three times. Leak 1.

 

[lg4420]

yup, hit call and the phone didn't even move, not sure

 

[John58543]

There has got to be a voicemail setting or something right? I dont see why my wifes eris is ringing two more times...



Sent from my Eris using Tapatalk

 

[John58543]

Bump....



Sent from my Eris using Tapatalk

 

[Zerethusta]

Did you dial in to your voicemail and see if you can change it from there?

 

[John58543]

Yes I did, nothing really jumped out at me...I went through all the prompts...I thought there used to be something in the vmail settings where you could adjust the amount of rings before caller is sent to vmail....I guess not. I am going to try to call customer support today. I will post what I find. Thanks.

 

[John58543]

So I spoke with verizon and the amount out rings cannot be edited it is a carrier setting....oh well guess im left with my short ring.



Sent from my Eris using Tapatalk

 

[Zerethusta]

Lame, guess it was my Pre on Sprint that had the number of rings option.

Kind of odd that yours and your wife's are set differently though. Did they say anything about that?

 

[matthewlatawiec]

I called Verizon on this issue also and the rep said that it couldn't be done so i asked her to transfer me to tech support and he said that they just found out that they can change the ring length from 30 seconds (5-6 rings) to 40 seconds (8 rings) but not everybody knows that this can be done for some reason so i had him change mine and it works great.

 

[ACD168]

I called Verizon on this issue also and the rep said that it couldn't be done so i asked her to transfer me to tech support and he said that they just found out that they can change the ring length from 30 seconds (5-6 rings) to 40 seconds (8 rings) but not everybody knows that this can be done for some reason so i had him change mine and it works great.

What did they do to change this?

 

[John58543]

Lame, guess it was my Pre on Sprint that had the number of rings option.

Kind of odd that yours and your wife's are set differently though. Did they say anything about that?

Well, i thought it had to do with me doing leak and hers still being factory settings...figured leak messed something up...I actually only messaged VZW Support on Twitter...not such a good idea. I will be calling tech support tomorrow to try and get someone to make my phone ring for forty seconds...sounds like a GREAT fix for this problem!!!

 

[John58543]

So I got to someone at tech support who knew about adjusting seconds until voicemail...he adjusted my wifes (on 2.1 OTA) and it made her's ring eight times before sending to voicemail!! Now, he did the same thing for my phone...it still only rings 3-4 times....frustrating!!!! I'm waiting for a call back from that tech now...sigh, so frustrating!!

 

[John58543]

So I got a NEW (not refurb) Eris today (after sitting in a VZW store for 2 hours ) because of this exact issue and guess what...even with the official 2.1 OTA (1.47 HBOOT) my phone still only rings about three times before switching to voicemail...arrgggggghhhhhh...