Go Back   Android Forums > Android Phones > LG Lucid

Like Tree1Likes
  • 1 Post By TheCheeze

test: Reply
 
LinkBack Thread Tools
Old January 17th, 2013, 02:43 PM   #1 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy emergency help QHSUSB DLOAD LG lucid

my lucid off

the device got corrupted ,now windows does not recognize it getting installing device, QHSUSB DLOAD,when the devise is lgmobile.

any idea plzzz

Advertisements
jelly bean is offline  
Reply With Quote
sponsored links
Old January 17th, 2013, 02:44 PM   #2 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

what is QHSUSB DLOAD???
jelly bean is offline  
Reply With Quote
Old January 17th, 2013, 06:16 PM   #3 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

I have the same problem after flashing a BS rom and finding out the hard way it was fake. The rom was thankfully removed from this forum but the damage was done and I am hoping it can be fixed?

I know there is a large support group for this issue on HTC phones and I hope we can get the same going.

To answer the OP, it appears to be a bad bootloader issue.
TheCheeze is offline  
Reply With Quote
Old January 17th, 2013, 08:01 PM   #4 (permalink)
Junior Member
 
Join Date: Nov 2012
Posts: 27
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

You try kdz method. It seems to ligit on recovering. Then try the lg recovery to be safe
soldier2009 is offline  
Reply With Quote
Old January 17th, 2013, 08:25 PM   #5 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

Soldier- It only works if the phone can go into download mode. Ours can not.
TheCheeze is offline  
Reply With Quote
Old January 17th, 2013, 10:34 PM   #6 (permalink)
Junior Member
 
Join Date: Nov 2012
Posts: 27
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

I was actually able too with it hooked up normally in debug. Forgot to put it in DL. True story. I mean hey worth a shot if you ask me.
soldier2009 is offline  
Last edited by soldier2009; January 17th, 2013 at 10:35 PM. Reason: let something out
Reply With Quote
Old January 17th, 2013, 10:41 PM   #7 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

What I mean to say is that our phones will not boot up at all. No lights, power, debug, nothing.
TheCheeze is offline  
Reply With Quote
Old January 18th, 2013, 01:01 AM   #8 (permalink)
LG Whiz Kid
 
sammyz's Avatar
 
Join Date: Jun 2011
Location: Pompano Beach, Fl
Gender: Male
Posts: 8,711
 
Device(s): LG Motion 4G---- LG Optimus L9
Carrier: MetroPCS

Thanks: 2,169
Thanked 2,310 Times in 1,510 Posts
Default Re: emergency help QHSUSB DLOAD LG lucid

You will have to jtag it to fix that. I don't know how its done, I only know it is your only hope
__________________
Ok, you want help? I am here to help. But if you can't read, I can't really help you.
Why on earth would anyone help someone who does not read? This is a forum, the purpose of it is to read.
sammyz is offline  
Reply With Quote
Old January 18th, 2013, 09:38 AM   #9 (permalink)
Junior Member
 
Join Date: Nov 2012
Posts: 27
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

http://forum.xda-developers.com/showthread.php?p=8029054
Idk if this will help. Try in to do a bit of research for you guys
soldier2009 is offline  
Reply With Quote
Old January 22nd, 2013, 07:11 PM   #10 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

I noticed something today that I don't know if it is relevant or can help, but my bottom row of buttons started flashing at me when plugged in to my laptop
jelly bean likes this.
TheCheeze is offline  
Reply With Quote
sponsored links
Old January 23rd, 2013, 07:24 AM   #11 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

show me picture
jelly bean is offline  
Reply With Quote
Old January 23rd, 2013, 07:30 AM   #12 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

my device connect whit my laptop now whit driver Qualcomm

driver here

http://www.2shared.com/file/lfhk3kwT/Qualcomm.html
jelly bean is offline  
Last edited by jelly bean; January 23rd, 2013 at 07:42 AM.
Reply With Quote
Old January 23rd, 2013, 08:20 AM   #13 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

I feel like we are almost there, i just need to know how the partition blocks are set up since they don't seem to be picked up on my linux devices as /dev/sd-type blocks. Other than that i have all of the steps listed here functioning the same. If Neph81 sees this and can tell me the mount point for the bootloader (and maybe proide a stock GB bootloader for good measure) then I think we can fix it using the same method.

I will post the output of my ls /dev after work tonight if nobody else chimes in.

-edit- Home for lunch so did a little testing. ls /dev is picking up a hidraw0 device with the phone plugged in. Does anyone have any insight to this? the information pulled from it is
$ ls -l /dev/hidraw0
crw------- 1 root root 250, 0 Jan 23 12:06 /dev/hidraw0
TheCheeze is offline  
Last edited by TheCheeze; January 23rd, 2013 at 12:08 PM. Reason: More test data
Reply With Quote
Old February 2nd, 2013, 10:04 AM   #14 (permalink)
Senior Member
 
Join Date: Mar 2012
Location: Wisconsin
Gender: Male
Posts: 1,373
 
Device(s): LG Spectrum, Droid 1, Nexus 7, OUYA (yeah, it's fun)
Carrier: Not Provided

Thanks: 188
Thanked 818 Times in 432 Posts
Default

/dev/block/mmcblk0p7

Sorry about the late delay. Life got busy last month. It's slowing down this month, and I just upgraded from an old AMD Athlon X64 to an I5. Kernels and what not compile much faster now. I'll hopefully be able to start tackling Lucid stuff again starting this coming week.
Neph81 is offline  
Reply With Quote
The Following User Says Thank You to Neph81 For This Useful Post:
Keynith (February 2nd, 2013)
Old February 12th, 2013, 02:51 PM   #15 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Build: verizon_lge/cayman_vzw_us/cayman:2.3.6/GRK39F/VS840ZV5.47B7D6E6:user/release-keys
Hardware: lge_cayman
Bootloader: unknown
Radio: unknown
Kernel: Linux version 2.6.35.11-perf (lge@android-build) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Fri Mar 23 04:46:18 KST 2012

[ 0.620673] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
[ 0.622547] Scorpion registered PMU device
[ 0.623077] pm8058_init: i2c_add_driver: rc = 0
[ 0.623202] pm8901_init: i2c_add_driver: rc = 0
[ 0.625108] pm8058_probe: PMIC revision: E3
[ 0.627093] pm8901_probe: PMIC revision: F4
[ 0.629699] pm8058_gpio_probe: gpiochip_add(): rc=0
[ 0.630333] pm8058_mpp_probe: gpiochip_add(): rc=0
[ 0.637427] bio: create slab <bio-0> at 0
[ 0.638000] pm8901_mpp_probe: gpiochip_add(): rc=0
[ 0.638673] pmic8058_pwm_probe: OK
[ 0.638986] SCSI subsystem initialized
[ 0.639185] usbcore: registered new interface driver usbfs
[ 0.639415] usbcore: registered new interface driver hub
[ 0.639647] usbcore: registered new device driver usb
[ 0.640223] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.640646] Bluetooth: Core ver 2.15
[ 0.640857] NET: Registered protocol family 31
[ 0.640954] Bluetooth: HCI device and connection manager initialized
[ 0.641134] Bluetooth: HCI socket layer initialized
[ 0.641321] Switching to clocksource dg_timer
[ 0.645389] NET: Registered protocol family 2
[ 0.645636] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.645910] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.646826] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.647725] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.647822] TCP reno registered
[ 0.647921] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.648032] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.648391] NET: Registered protocol family 1
[ 0.650130] RPC: Registered udp transport module.
[ 0.650231] RPC: Registered tcp transport module.
[ 0.650407] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.650655] Trying to unpack rootfs image as initramfs...
[ 0.721613] Freeing initrd memory: 1456K
[ 0.721962] PMU: registered new PMU device of type 0
[ 0.722449] ETM/ETB intialized.
[ 0.722549] sdio_al:SDIO-AL SW version 1.30
[ 0.724970] Error: Driver 'SDIO_CIQ_TEST' is already registered, aborting...
[ 0.728401] msm_dsps driver version 1.03.
[ 0.733320] charm_modem_probe: Registering charm modem
[ 0.735884] msm_rpm_log_probe: OK
[ 0.736084] [sdio_debug_init] ++
[ 0.736332] [sdio_debug_init] successfully registered SDIO device[sdio_debug_init] --
[ 0.736958] diagcmd_probe:lg_fw_diagcmd
[ 0.737704] input: ats_input as /devices/virtual/input/input0
[ 0.737958] lge_emmc_direct_access_init: finished
[ 0.738398] lge_tempdevice_init
[ 0.738905] [miracle.kim] Mt9p017.c : mt9p017_init
[ 0.739150] [miracle.kim] Mt9p017.c : __mt9p017_probe
[ 0.739278] msm_camera_vreg_enable:
[ 0.740197] Mt9p017.c : mt9p017_sensor_probe
[ 0.791546] Mt9p017.c : mt9p017_sensor_probe - complete : 0
[ 0.791720] msm_camera_vreg_disable:
[ 0.792808] msm_camera_vreg_enable:
[ 0.793576] msm_camera_vreg_disable:
[ 0.794708] lm3537_probe: i2c probe start
[ 0.806071] mipi_lgd_lcd_probe: mipi lgd lcd probe start
[ 0.806172] setting pdata->panel_info.fb_num to 3. type: 8
[ 0.806516] sensor_common_power_set pwr_mask(0), on(1), sensor(1)
[ 0.809052] k3dh_acc_misc Device detected!
[ 0.809381] k3dh_acc_misc I2C driver registered!
[ 0.809925] input: accelerometer as /devices/virtual/input/input1
[ 0.810217] input: gesture_tap as /devices/virtual/input/input2
[ 0.810425] input: gesture_flip as /devices/virtual/input/input3
[ 0.810801] sensor_common_power_set pwr_mask(1), on(0), sensor(1)
[ 0.811363] sensor_common_power_set pwr_mask(0), on(1), sensor(4)
[ 0.813187] input: gyroscope as /devices/virtual/input/input4
[ 0.813288] sensor_common_power_set pwr_mask(4), on(0), sensor(4)
[ 0.814029] sensor_common_power_set pwr_mask(0), on(1), sensor(2)
[ 0.815822] ami306 11-000e: force operating mode
[ 0.816001] Register input device!
[ 0.816216] input: magnetic_field as /devices/virtual/input/input5
[ 0.831517] apds9900 11-0039: enable = 0
[ 0.831618] power_set_for_8058_l15: prox/als power line: 4145, onoff(1)
[ 0.842502] apds9900 11-0039: support ver. 1.0.4 enabled
[ 0.842833] input: proximity as /devices/virtual/input/input6
[ 0.843125] input: light as /devices/virtual/input/input7
[ 1.251625] input: synaptics_ts as /devices/virtual/input/input8
[ 1.255627] [Touch] UNLOCK
[ 1.255832] [Touch] Synaptics TM1992-001(Interrupt mode): ID[1], FW rev[4], f/u[0]
[ 1.255931] [Touch] irq_pin[1], next_work[0], baseline state: 0
[ 1.256235] Loading pn544 driver
[ 1.256393] testmode_init
[ 1.256640] testmode_probe
[ 1.256968] [Touch] FW-upgrade is not executed
[ 1.361731] input: atcmd_virtual_kbd as /devices/platform/atcmd_virtual_kbd/input/input9
[ 1.362359] lge_panic_handler: got buffer at 42d80000, size 40000
[ 1.374193] highmem bounce pool size: 64 pages
[ 1.374527] ashmem: initialized
[ 1.392022] Slow work thread pool: Starting up
[ 1.392221] Slow work thread pool: Ready
[ 1.392409] msgmni has been set to 621
[ 1.413602] alg: No test for stdrng (krng)
[ 1.413829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.414013] io scheduler noop registered
[ 1.414111] io scheduler deadline registered (default)
[ 1.414293] io scheduler cfq registered
[ 1.420849] mipi_dsi base phy_addr = 0x4700000 virt = 0xe1b00000
[ 1.421029] msm_mmss_cc base = 0xfa014000
[ 1.421131] mmss_sfpb base phy_addr = 0x5700000 virt = 0xe1874000
[ 1.421322] mipi_dsi_probe: vsync_gpio=0
[ 1.424975] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
[ 1.426681] Registered led device: lcd-backlight
[ 1.427393] msm_vidc_dec: Inside vid_dec_init()
[ 1.427617] msm_vidc_dec: Inside vid_dec_vcd_init()
[ 1.427889]
[ 1.427892] msm_vidc_enc: Inside vid_enc_init()
[ 1.428261]
[ 1.428265] msm_vidc_enc: Inside vid_enc_vcd_init()
[ 1.572140] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
[ 1.572945] msm_serial_hs module loaded
[ 1.573129] msm_serial_hsl: detected port #1
[ 1.573271] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
[ 1.573847] msm_serial_hsl: detected port #0
[ 1.573996] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
[ 1.574632] msm_serial_hsl: driver initialized
[ 1.578340] brd: module loaded
[ 1.580398] loop: module loaded
[ 1.580642] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
[ 1.580787] pmem: Initializing pmem_kernel_smi (in-kernel)
[ 1.580997] pmem: Initializing pmem (user-space) as cached
[ 1.581448] pmem: Initializing pmem_adsp (user-space) as non-cached
[ 1.581835] pmem: Reserving virtual address range e3000000 - e5000000 for pmem_adsp
[ 1.582069] pmem: Initializing pmem_audio (user-space) as non-cached
[ 1.582356] pmem: Initializing pmem_smipool (user-space) as non-cached
[ 1.582697] pmem: Reserving virtual address range e6000000 - e9a00000 for pmem_smipool
[ 1.583514] pmic8058_upl_probe: OK
[ 1.584203] pmic8058_misc_probe: OK
[ 1.584527] pm8058_batt_alarm_threshold_set: pm8058_batt_alarm_threshold_set : lower_threshold_mV = 4120, upper_threshold_mV = 4200
[ 1.584819] pm8058_batt_alarm_state_set: BATTERY ALARM LOWER SET ENABLE
[ 1.585000] pm8058_batt_alarm_probe: OK
[ 1.590603] adie_codec_register_codec_operations: codec type 1
[ 1.601981] SCSI Media Changer driver v0.25
[ 1.602167] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 1.602346] CSLIP: code copyright 1989 Regents of the University of California.
[ 1.602700] brcm_static_buf_init: initialize wifi_alloc_data
[ 1.602887] Section [3] initial allocation success size[139264]!!!
[ 1.603064] Section [2] initial allocation success size[32768]!!!
[ 1.603162] Section [1] initial allocation success size[12288]!!!
[ 1.603340] Section [0] initial allocation success size[12288]!!!
[ 1.603464] rmnet_init: SMD devices[8]
[ 1.606791] rmnet_init: SDIO devices[8]
[ 1.611985] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.612243] host driver registered w/ tranceiver
[ 1.612551] usbcore: registered new interface driver cdc_acm
[ 1.612649] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.612827] Initializing USB Mass Storage driver...
[ 1.612964] usbcore: registered new interface driver usb-storage
[ 1.613141] USB Mass Storage support registered.
[ 1.613268] usbcore: registered new interface driver usb_ehset_test
[ 1.613665] peripheral driver registered w/ tranceiver
[ 1.614137] android_usb gadget: android_usb ready
[ 1.614531] fserial_probe:gport:tty_ports:0 sdio_ports:1 smd_ports:1 nr_ports:2
[ 1.614633] android_register_function: modem 1 6
[ 1.614923] atcmd_init: ATCMD Handler /dev/lge_atcmd major=237
[ 1.615368] seunghun.kim : f_adb init
[ 1.615549] android_register_function: adb 2 6
[ 1.615875] android_register_function: usb_mass_storage 3 6
[ 1.616053] f_ecm init
[ 1.616150] android_register_function: cdc_ethernet 4 6
[ 1.616337] android_register_function: diag 5 6
[ 1.616576] android_register_function: diag_mdm 6 6
[ 1.617285] daniel.kang gport_setup (0): no_tty_ports:0 no_sdio_ports:1 no_smd_ports:1 nr_ports:2
[ 1.617469] gser_bind_config: serial ctrl status 4
[ 1.617566] gser_bind_config: serial data status 5
[ 1.617928] android_usb gadget: using random self ethernet address
[ 1.618036] android_usb gadget: using random host ethernet address
[ 1.618504] usb0: MAC 5a:ba:2e:9a:1a:7c
[ 1.618603] usb0: HOST MAC 82:32:8c:05:d8:ec
[ 1.618781] ecm_bind_config: iMACAddress = 7
[ 1.620112] DIAG registered SDIO device
[ 1.620713] diagchar initialized
[ 1.623330] input: ffa-keypad as /devices/i2c-6/6-0055/pm8058-keypad/input/input10
[ 1.624803] input: pmic8058_pwrkey as /devices/i2c-6/6-0055/pm8058-pwrkey/input/input11
[ 1.625372] ######## bthid_init: ########
[ 1.625657] ######## bthid_init: done ########
[ 1.626870] using rtc device, pm8058_rtc0, for alarms
[ 1.626990] pm8058-rtc pm8058-rtc: rtc core: registered pm8058_rtc0 as rtc0
[ 1.627380] i2c /dev entries driver
[ 1.629275] IR NEC protocol handler initialized
[ 1.629377] IR RC5(x) protocol handler initialized
[ 1.629552] IR RC6 protocol handler initialized
[ 1.629647] IR JVC protocol handler initialized
[ 1.629821] IR Sony protocol handler initialized
[ 1.629918] Linux video capture interface: v2.00
[ 1.630365] usbcore: registered new interface driver uvcvideo
[ 1.630543] USB Video Class driver (v0.1.0)
[ 1.631576] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
[ 1.641767] ############ [msm_charger_temp_work] POLL TIME = 5400 #####################
[ 1.652194] max17040 9-0036: MAX17040 Fuel-Gauge Ver 02
[ 1.652962] msm_adc successfully registered
[ 1.653798] pmic8901_tm_probe: OK
[ 1.654178] ====adc_channel_request_conv: Pm8058 xoadc calibration
[ 1.691509] pmic8058_xoadc:The offset for AMUX calibrationwas -464
[ 1.696253] pmic8058_tm_probe: OK
[ 1.711510] tsens_tm_probe: OK
[ 1.712112] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 1.712320] Bluetooth: HCI UART driver ver 2.2
[ 1.712495] Bluetooth: HCI H4 protocol initialized
[ 1.712592] Bluetooth: HCI_IBS protocol initialized
[ 1.712688] Bluetooth: MSM Sleep Mode Driver Ver 1.1
[ 1.713184] [LG_BTUI] bluetooth_power_init : Called bluetooth_power_init
[ 1.713333] [LG_BTUI] bt_power_probe : Called bt_power_probe
[ 1.713598] [LG_BTUI] bluetooth_power_rfkill_probe : Called bluetooth_power_rfkill_probe
[ 1.751488] cpuidle: using governor ladder
[ 1.751673] cpuidle: using governor menu
[ 1.752037] mmc0: No card detect facilities available
[ 1.752333] mmc0: mmc power down
[ 1.752450] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
[ 1.752629] mmc0: 8 bit data mode enabled
[ 1.752724] mmc0: 4 bit data mode disabled
[ 1.752901] mmc0: polling status mode disabled
[ 1.752998] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
[ 1.753106] mmc0: Slot eject status = 0
[ 1.753282] mmc0: Power save feature enable = 1
[ 1.753382] mmc0: DM non-cached buffer at ff214000, dma_addr 0x60101000
[ 1.753568] mmc0: DM cmd busaddr 0x60101000, cmdptr busaddr 0x60101300
[ 1.753635] mmc0: mmc power up
[ 1.754171] mmc1: mmc power down
[ 1.754277] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
[ 1.754455] mmc1: 8 bit data mode enabled
[ 1.754551] mmc1: 4 bit data mode disabled
[ 1.754649] mmc1: polling status mode disabled
[ 1.754826] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
[ 1.754924] mmc1: Slot eject status = 0
[ 1.755102] mmc1: Power save feature enable = 1
[ 1.755199] mmc1: DM non-cached buffer at ff215000, dma_addr 0x60103000
[ 1.755378] mmc1: DM cmd busaddr 0x60103000, cmdptr busaddr 0x60103300
[ 1.755778] mmc2: mmc power down
[ 1.755884] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
[ 1.756065] mmc2: 8 bit data mode disabled
[ 1.756242] mmc2: 4 bit data mode enabled
[ 1.756338] mmc2: polling status mode disabled
[ 1.756435] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
[ 1.756610] mmc2: Slot eject status = 0
[ 1.756704] mmc2: Power save feature enable = 1
[ 1.756880] mmc2: DM non-cached buffer at ff216000, dma_addr 0x60104000
[ 1.756977] mmc2: DM cmd busaddr 0x60104000, cmdptr busaddr 0x60104300
[ 1.757259] bcm432x_sdcc_wlan_slot_status: 34 0
[ 1.757581] mmc3: mmc power down
[ 1.757686] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,290 dma 21 dmacrcri 5
[ 1.757862] mmc3: 8 bit data mode disabled
[ 1.757957] mmc3: 4 bit data mode enabled
[ 1.758131] mmc3: polling status mode disabled
[ 1.758229] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
[ 1.758407] mmc3: Slot eject status = 1
[ 1.758503] mmc3: Power save feature enable = 1
[ 1.758602] mmc3: DM non-cached buffer at ff217000, dma_addr 0x60106000
[ 1.758781] mmc3: DM cmd busaddr 0x60106000, cmdptr busaddr 0x60106300
[ 1.759238] mmc4: mmc power down
[ 1.759345] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
[ 1.759525] mmc4: 8 bit data mode disabled
[ 1.759620] mmc4: 4 bit data mode enabled
[ 1.759715] mmc4: polling status mode disabled
[ 1.759890] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
[ 1.759985] mmc4: Slot eject status = 0
[ 1.760161] mmc4: Power save feature enable = 1
[ 1.760256] mmc4: DM non-cached buffer at ff218000, dma_addr 0x60107000
[ 1.760430] mmc4: DM cmd busaddr 0x60107000, cmdptr busaddr 0x60107300
[ 1.760993] Registered led device: button-backlight
[ 1.761718] usbcore: registered new interface driver usbhid
[ 1.761818] usbhid: USB HID core driver
[ 1.762469] logger: created 64K log 'log_main'
[ 1.762791] logger: created 256K log 'log_events'
[ 1.763024] logger: created 64K log 'log_radio'
[ 1.763330] logger: created 64K log 'log_system'
[ 1.764004] usbcore: registered new interface driver snd-usb-audio
[ 1.764408] No device for DAI CODEC_DAI
[ 1.764504] No device for DAI CPU_DAI
[ 1.764888] msm_soc: create pcms
[ 1.765091] asoc: CODEC_DAI <-> CPU_DAI mapping ok
[ 1.766098] No device for DAI MVS_CODEC_DAI
[ 1.766199] No device for DAI MVS_CPU_DAI
[ 1.766735] asoc: MVS_CODEC_DAI <-> MVS_CPU_DAI mapping ok
[ 1.768013] ALSA device list:
[ 1.768116] #0: msm-audio (MSM-CARD)
[ 1.768292] #1: msm-voip (MSM-MVS-CARD)
[ 1.768451] u32 classifier
[ 1.768547] Actions configured
[ 1.768728] Netfilter messages via NETLINK v0.30.
[ 1.768876] nf_conntrack version 0.5.0 (12878 buckets, 51512 max)
[ 1.769283] ctnetlink v0.93: registering with nfnetlink.
[ 1.769453] xt_time: kernel timezone is -0000
[ 1.769702] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.770012] arp_tables: (C) 2002 David S. Miller
[ 1.770149] TCP cubic registered
[ 1.770386] NET: Registered protocol family 10
[ 1.770888] lo: Disabled Privacy Extensions
[ 1.772921] Mobile IPv6
[ 1.773056] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.773244] IPv6 over IPv4 tunneling driver
[ 1.773724] sit0: Disabled Privacy Extensions
[ 1.774004] NET: Registered protocol family 17
[ 1.774308] Bluetooth: L2CAP ver 2.15
[ 1.774406] Bluetooth: L2CAP socket layer initialized
[ 1.774593] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.774688] Bluetooth: SCO socket layer initialized
[ 1.774931] Bluetooth: RFCOMM TTY layer initialized
[ 1.775038] Bluetooth: RFCOMM socket layer initialized
[ 1.775217] Bluetooth: RFCOMM ver 1.11
[ 1.775313] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.775410] Bluetooth: BNEP filters: protocol multicast
[ 1.775588] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.793709] set_dload_mode : 0
[ 1.797879] init_watchdog regsave = -537493504
[ 1.797993] MSM Watchdog Initialized
[ 1.798421] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
[ 1.800551] pm8058-rtc pm8058-rtc: setting system clock to 1970-01-01 02:26:48 UTC (8808)
[ 1.800739] ############ [msm_charger_temperature_battery_alarm] #####################
[ 1.801733] ############ [msm_charger_temp_work] POLL TIME = 5400 #####################
[ 1.804059] pm8058_is_battery_present: therm_raw is 1112
[ 1.804239] batt_read_adc: couldnt open channel 0 ret=-9
[ 1.804338] pm8058_is_battery_id_valid: batt_id_mv is -22
[ 1.806815] pm8058_is_battery_temp_within_range: therm_celcius is 27
[ 1.808070] max17040_get_mvolts: Battery voltage is 3580
[ 1.808767] max17040_get_capacity_percent: Battery SOC is 9
[ 1.811174] batt_read_adc: couldnt open channel 0 ret=-9
[ 1.811350] pm8058_is_battery_id_valid: batt_id_mv is -22
[ 1.813747] pm8058_get_battery_temperature_adc: therm_raw is 1112
[ 1.814096] determine_initial_batt_status:OK batt_status=2
[ 1.819402] pm8058-charger pm8058-charger: pm8058_chg_determine_initial_state charger absent
[ 1.819587] pm8058_batt_alarm_state_set: BATTERY ALARM SET DISABLE
[ 1.824752] pm8058_batt_alarm_threshold_set: pm8058_batt_alarm_threshold_set : lower_threshold_mV = 4120, upper_threshold_mV = 4200
[ 1.825104] pm8058_charger_probe: pm8058_charger_probe OK
[ 1.825359] HSD.fsa8008[lge_hsd_init : 768]lge_hsd_init
[ 1.825658] HSD.fsa8008[lge_hsd_probe : 525]lge_hsd_probe
[ 1.825998] HSD.fsa8008[lge_hsd_probe : 608]hi->irq_detect = 639
[ 1.826344] HSD.fsa8008[lge_hsd_probe : 633]hi->irq_key = 640
[ 1.826685] input: ffa-keypad as /devices/virtual/input/input12
[ 1.827259] LGE: Android Vibrator Driver Init
[ 1.833434] max17040_get_mvolts: Battery voltage is 3580
[ 1.833634] [LGE:vibrator] GPIO_LIN_MOTOR_EN gpio value :0
[ 1.838920] LGE: Android Vibrator Initialization was done
[ 1.849544] max17040_get_capacity_percent: Battery SOC is 9
[ 1.850277] msm_otg_suspend: usb in low power mode
[ 1.860272] batt_read_adc: couldnt open channel 0 ret=-9
[ 1.860451] pm8058_is_battery_id_valid: batt_id_mv is -22
[ 1.876366] pm8058_get_battery_temperature_adc: therm_raw is 1112
[ 1.877764] Warning: unable to open an initial console.
[ 1.907777] mmc0: new high speed MMC card at address 0001
[ 1.908242] mmcblk0: mmc0:0001 HYNIX 7.22 GiB
[ 1.908597] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19
[ 1.913986] max17040_get_mvolts: Battery voltage is 3580
[ 1.914229] p20 p21 p22 p23 p24 p25 p26 p27
[ 1.915138] max17040_get_capacity_percent: Battery SOC is 9
[ 1.915662] p28 p29 p30 p31 >
[ 1.918338] batt_read_adc: couldnt open channel 0 ret=-9
[ 1.918522] pm8058_is_battery_id_valid: batt_id_mv is -22
[ 1.919183] mmc1: mmc power up
[ 1.921569] pm8058_get_battery_temperature_adc: therm_raw is 1112
[ 2.049205] mmc1: mmc power down
[ 2.051085] mmc2: mmc power up
[ 2.144947] init: cannot open '/initlogo.rle'
[ 2.146148] init: Unable to open persistent property directory /data/property errno: 2
[ 2.178595] mmc2: host does not support reading read-only switch. assuming write-enable.
[ 2.178793] mmc2: new high speed SDHC card at address b368
[ 2.179216] mmcblk1: mmc2:b368 SD 3.75 GiB
[ 2.179575] mmcblk1: p1
[ 2.181386] mmc3: mmc power up
[ 2.191544] mdp4_overlay_pipe_alloc: pipe=c0a5e820 ndx=1 num=0 share=0 cnt=0
[ 2.191728] mdp4_overlay_writeback_setup: base=423d1800 offset=859800
[ 2.234607] mmc3: mmc power down
[ 2.234808] mmc4: mmc power up
[ 2.302243] mipi_dsi_host_init: mipi_dsi_sw_reset ..
[ 2.302344] mipi_lgd_lcd_on: mipi lgd lcd on started
[ 2.368031] mmc4: mmc power down
[ 2.530299] mdp_disable_irq_nosync: MDP IRQ term-0x20 is NOT set, mask=1 irq=1
[ 3.045291] EXT4-fs (mmcblk0p27): recovery complete
[ 3.049505] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
[ 5.888629] daniel.kang volume-dn : MHL_OFF
[ 6.262474] daniel.kang volume-dn : MHL_OFF
[ 6.787392] daniel.kang volume-dn : MHL_OFF
[ 7.162937] daniel.kang volume-dn : MHL_OFF
[ 7.496486] daniel.kang volume-dn : MHL_OFF
[ 7.867941] daniel.kang volume-dn : MHL_OFF
[ 9.198563] Power Key Pressed!Power Key Release!
[ 11.520651] daniel.kang volume-up : MHL_ON
[ 12.201534]
[ 12.201538] (IOS backup)
[ 12.201541] mmc2: clock 48000000Hz busmode 2 powermode 2 cs 0 Vdd 15 width 2 timing 2
[ 12.202849] mmc2: mmc power down
[ 12.241506] msmsdcc_runtime_suspend() - host->mmc->index=3 - Start
[ 12.241608] local_clk_disable_nolock: Reference counts are incorrect for clock 30!
[ 12.241880] local_clk_disable_nolock: Reference counts are incorrect for clock 73!
[ 12.242059] msmsdcc_runtime_suspend() - host->mmc->index=3 - EndPower Key Pressed!Power Key Release!
[ 15.195271] daniel.kang volume-up : MHL_ON
[ 18.251489] daniel.kang volume-dn : MHL_OFF
[ 23.569426] mmc0: mmc power down
[ 31.570385] Power Key Pressed!mmc0: mmc power up
[ 31.762359] Power Key Release!
[ 31.812523] SysRq : Emergency Remount R/O
[ 31.813197] sys_reboot: sys_reboot is called from android
[ 31.813327] sys_reboot: reboot cmd is 19088743
[ 31.813434] lge_set_kernel_shutdown_nofityed, state : 4
[ 31.814343] k3dh_shutdown !
[ 31.814590] sensor_common_power_set pwr_mask(2), on(0), sensor(1)
[ 31.814875] lm3537_shutdown
[ 31.818993] Initiating msm_sdio_al_shutdown...
[ 31.819093] msm_sdio_al_shutdown complete.
[ 31.819368] charm_modem_shutdown: AP2MDM_PMIC_RESET_N goes low!!
[ 31.827519] EXT4-fs (mmcblk0p27): re-mounted. Opts: (null)
[ 31.828419] Emergency Remount complete
[ 36.211711] Restarting system.
[ 36.212205] set_dload_mode : 0
[ 36.213037] set_dload_mode : 0
[ 36.213484] Going down for restart now : (null)

No errors detected
jelly bean is offline  
Reply With Quote
Old February 13th, 2013, 12:21 PM   #16 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

How did you do it?
TheCheeze is offline  
Reply With Quote
Old February 13th, 2013, 01:52 PM   #17 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

I found it in my memory card
stock backup to rom manager but i Lost a lot of files in my laptop
jelly bean is offline  
Reply With Quote
Old February 13th, 2013, 02:00 PM   #18 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

pci-0000:00:1d.7-usb-0:1:1.0-port0

usb-Qualcomm_CDMA_Technologies_MSM_QHSUSB_DLOAD-if00-port0
jelly bean is offline  
Last edited by jelly bean; February 14th, 2013 at 02:34 PM.
Reply With Quote
Old February 13th, 2013, 02:11 PM   #19 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

i installer ubuntu 12.10 i found to file when connected lucid my laptop
jelly bean is offline  
Reply With Quote
Old February 13th, 2013, 04:41 PM   #20 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

So that is just a text file and not the results of a fix for the phone itself? Darn
TheCheeze is offline  
Reply With Quote
sponsored links
Old February 14th, 2013, 02:31 PM   #21 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

LG lucid QHSUSB DLOAD.rar download - 2shared
jelly bean is offline  
Reply With Quote
Old February 14th, 2013, 02:34 PM   #22 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

this is QHSUSB DLOAD of LG lucid i found in my laptop ubuntu
jelly bean is offline  
Reply With Quote
Old February 15th, 2013, 07:58 AM   #23 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

https://wws.lg.com/global/support/opensource/opensourceList?types=ALL&search=vs840
jelly bean is offline  
Reply With Quote
Old February 15th, 2013, 07:58 AM   #24 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

jelly bean is offline  
Reply With Quote
Old February 23rd, 2013, 02:58 PM   #25 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

I'm confused, were you actually able to fix it using this?
TheCheeze is offline  
Reply With Quote
Old February 24th, 2013, 11:16 AM   #26 (permalink)
Junior Member
 
un1ocked's Avatar
 
Join Date: Dec 2010
Posts: 68
 
Device(s):
Carrier: Not Provided

Thanks: 9
Thanked 2 Times in 2 Posts
Default

i'm joining this club, shall we go to the linux
un1ocked is offline  
Reply With Quote
Old March 2nd, 2013, 07:06 AM   #27 (permalink)
Junior Member
 
un1ocked's Avatar
 
Join Date: Dec 2010
Posts: 68
 
Device(s):
Carrier: Not Provided

Thanks: 9
Thanked 2 Times in 2 Posts
Default



you should try this if you want
un1ocked is offline  
Reply With Quote
Old March 2nd, 2013, 10:57 AM   #28 (permalink)
LG Whiz Kid
 
sammyz's Avatar
 
Join Date: Jun 2011
Location: Pompano Beach, Fl
Gender: Male
Posts: 8,711
 
Device(s): LG Motion 4G---- LG Optimus L9
Carrier: MetroPCS

Thanks: 2,169
Thanked 2,310 Times in 1,510 Posts
Default Re: emergency help QHSUSB DLOAD LG lucid

Quote:
Originally Posted by un1ocked View Post


you should try this if you want
How do you get the needed files?
sammyz is offline  
Reply With Quote
Old March 5th, 2013, 11:10 AM   #29 (permalink)
Junior Member
 
un1ocked's Avatar
 
Join Date: Dec 2010
Posts: 68
 
Device(s):
Carrier: Not Provided

Thanks: 9
Thanked 2 Times in 2 Posts
Default Re: emergency help QHSUSB DLOAD LG lucid

I don't have any needed file, that's the main problem...
un1ocked is offline  
Reply With Quote
Old March 5th, 2013, 08:31 PM   #30 (permalink)
LG Whiz Kid
 
sammyz's Avatar
 
Join Date: Jun 2011
Location: Pompano Beach, Fl
Gender: Male
Posts: 8,711
 
Device(s): LG Motion 4G---- LG Optimus L9
Carrier: MetroPCS

Thanks: 2,169
Thanked 2,310 Times in 1,510 Posts
Default Re: emergency help QHSUSB DLOAD LG lucid

Quote:
Originally Posted by un1ocked View Post
I don't have any needed file, that's the main problem...
Oh....
sammyz is offline  
Reply With Quote
sponsored links
Old March 6th, 2013, 06:55 AM   #31 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

i found mmcblk0p13 mmcblk0p7 mmcblk0p8

RESTORE.zip download - 2shared
jelly bean is offline  
Reply With Quote
Old March 6th, 2013, 08:04 AM   #32 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

msm8660_surf" | "msm8660_csfb" | "cayman")


vs840 2.3永久关闭四大天王灯.rar download - 2shared
jelly bean is offline  
Reply With Quote
Old March 9th, 2013, 07:19 AM   #33 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

ubuntu@ubuntu:~$ lsusb
Bus 001 Device 008: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
Bus 001 Device 002: ID 8564:1000
Bus 003 Device 003: ID 04b3:310c IBM Corp. Wheel Mouse
Bus 003 Device 002: ID 03f0:011d Hewlett-Packard Bluetooth 1.2 Interface [Broadcom BCM2035]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
ubuntu@ubuntu:~$ dmesg | tail -15
[ 830.102236] usbcore: deregistering interface driver usbserial
[ 1134.430238] usb 1-1: >USB disconnect, device number 6
[ 1136.696069] usb 1-1: >new high-speed USB device number 8 using ehci_hcd
[ 1136.828837] usb 1-1: >New USB device found, idVendor=05c6, idProduct=9008
[ 1136.828848] usb 1-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1136.828854] usb 1-1: >Product: QHSUSB_DLOAD
[ 1136.828860] usb 1-1: >Manufacturer: Qualcomm CDMA Technologies MSM
[ 1136.889142] usbcore: registered new interface driver usbserial
[ 1136.889803] usbcore: registered new interface driver usbserial_generic
[ 1136.890437] USB Serial support registered for generic
[ 1136.890444] usbserial: USB Serial Driver core
[ 1136.903877] usbcore: registered new interface driver qcserial
jelly bean is offline  
Reply With Quote
Old March 9th, 2013, 07:23 AM   #34 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Windows detects qhusb_dload device and under Linux, I get a serial modem (attached to ttyUSB0). Device driver id is 05c6:9008. But no block/sd device is detected.
i cant see storage of phone
jelly bean is offline  
Reply With Quote
Old March 13th, 2013, 01:49 AM   #35 (permalink)
Junior Member
 
un1ocked's Avatar
 
Join Date: Dec 2010
Posts: 68
 
Device(s):
Carrier: Not Provided

Thanks: 9
Thanked 2 Times in 2 Posts
Default Re: emergency help QHSUSB DLOAD LG lucid

Just try to flash the bootloader only
The mpgr8660 and 8660.mbn
un1ocked is offline  
Reply With Quote
Old April 11th, 2013, 08:39 AM   #36 (permalink)
Junior Member
Thread Author (OP)
 
Join Date: Nov 2012
Posts: 38
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Help
jelly bean is offline  
Reply With Quote
Old May 1st, 2013, 02:15 PM   #37 (permalink)
Senior Member
 
plasticarmyman's Avatar
 
Join Date: Oct 2011
Gender: Male
Posts: 892
 
Device(s): LG Motion 4G Nook Color PA, HTC One V CM10.1, Nexus 4 DIrty Unicorns
Carrier: Not Provided

Thanks: 90
Thanked 254 Times in 162 Posts
Default

try this

Unlimited.IO


just to see...i know LG aren't the supported devices...but it won't hurt to try
__________________
Our forums have a search button..

on the top right underneath your user name and all that info...there's a link that says "search this forum"...click it...a search field will popup...check ALL THE PAGES before posting a new thread for your question...
plasticarmyman is offline  
Reply With Quote
Old May 14th, 2013, 12:26 PM   #38 (permalink)
Junior Member
 
un1ocked's Avatar
 
Join Date: Dec 2010
Posts: 68
 
Device(s):
Carrier: Not Provided

Thanks: 9
Thanked 2 Times in 2 Posts
Default

Any progress here?
un1ocked is offline  
Reply With Quote
Old September 24th, 2013, 05:28 PM   #39 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

Bringing this back from the dead to say I think I am making some headway. If anyone can use the tool here SHV-E160L Debricking Tool / Qualcomm Tool Pack V2-1 - xda-developers to get a dump of the bootloader I will see if I can flash it to my lucid. The files I currently have put together give a cookie error but they are not made for the lucid in specific.
TheCheeze is offline  
Reply With Quote
Old October 9th, 2013, 07:24 AM   #40 (permalink)
Junior Member
 
un1ocked's Avatar
 
Join Date: Dec 2010
Posts: 68
 
Device(s):
Carrier: Not Provided

Thanks: 9
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by TheCheeze View Post
Bringing this back from the dead to say I think I am making some headway. If anyone can use the tool here SHV-E160L Debricking Tool / Qualcomm Tool Pack V2-1 - xda-developers to get a dump of the bootloader I will see if I can flash it to my lucid. The files I currently have put together give a cookie error but they are not made for the lucid in specific.
which partitions do you need?
un1ocked is offline  
Reply With Quote
sponsored links
Old October 10th, 2013, 09:58 PM   #41 (permalink)
Junior Member
 
Join Date: Oct 2012
Posts: 35
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 2 Times in 1 Post
Default

To be honest I am still trying to figure that out. Wish I could find the faulty .zip that was flashed so I could find out what all it replaced. I am kind of blindly fumbling through these apps
TheCheeze is offline  
Reply With Quote
Reply

LG Lucid
Current Rating:
Rate this Phone:

The LG Lucid is a mid-range 4G LTE handset for Verizon. It features dual-core processing, a 4-inch IPS display, and 5MP camera as well as 1GB of RAM and 8GB of on-board storage. The phone ships with Android 2.3. ... Read More

Tags
lucid


Go Back   Android Forums > Android Phones > LG Lucid
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 05:49 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.