Device(s): DrOID Bionic, Stock Rooted; OG DrOID, LGB 1.9
Carrier: Not Provided
Thanks: 154
Thanked 70 Times in 58 Posts
Quote:
Originally Posted by brocja01
Amazing how people with the exact same phones can have such different experiences. I'm running 1.5 with Slayers 1k kernel and smoked theme and it is flying.
Yes it is, but that is the nature of pushing things to the edge.
My best with the current setup:
Last edited by SNeitzel; August 30th, 2010 at 12:09 PM.
Everything was great till today. Went from a 80 service down to 94. Updated my roaming, tried everything and still cant get a signal. So switches back to chevy 4.7 an solid three bars. What could it be?
Well... Looks like I pegged mine out. The fastest stable speed I can run mine at is 1100. Quadrant scored it at 1329. Not too shabby, but it just goes to show... not all Droids are created equal.
The voice dialer app is missing. I pulled the app from another rom and it works fine although you don’t get the voice prompt (speak now) but that prompt did not work in v1.4 either.
Can someone post the voice dialer apk?..I wnt to reinstall it.
Amazing how people with the exact same phones can have such different experiences. I'm running 1.5 with Slayers 1k kernel and smoked theme and it is flying.
Actually, as with any electronics that are mass produced, not all devices are the same.
Case in point- My DROID hated trying to go over 1100 MHz when I first rooted - until I used Taz's kernels. Then, it hated 1200 unless I used BD ROM. Now, it just hates it whenever I switch a ROM from something else that has been working on my phone for a long period of time lol.
My phone loves Chevy's kernels and does OK with P3's kernels, but performs nearly flawlessly on jdflg's kernels. It scores best with Chevy and decent with P3, but with jdflg's latest kernels my scores suck arse. But the phone runs perfectly fine with the kernel, smooth as silk, no lagging, extremely hard to reach high temps.
Others here have said that Chevy's makes their phone go stupid, that P3 does very well to excellent, and that LFY 1.5 with the stock kernel run as the best ROM ever.
I had that experience with LFY 1.4 - but 1.5 just ain't doing it for my phone. however,I have yet to flash dif kernels on here.
Although the devices are the same make and model, there is no way to say they are identical - the same CPU from Intel in 4 different machines can achieve 4 potentially different (as in drastically different) OCs.
Same applies to our phones.
Quote:
Originally Posted by slider5634
Well... Looks like I pegged mine out. The fastest stable speed I can run mine at is 1100. Quadrant scored it at 1329. Not too shabby, but it just goes to show... not all Droids are created equal.
Not 100% sure why, but today i decided to swap my SetCPU over to the interactive mode and now HOLY CRAP, this is easily the fastest and smoothest my phone has gone. I've been running a few different 1.2 kernals (a couple of p3's, and now slayhers), but just going from ondemand to interactive its almost a night and day difference. Everything from waking up, to scrolling home screens, to opening and closing apps is just SUPER smooth, now if the battery life holds out, i may have a hard time wanting to change from this setup... Thanks liquid and slayher!!!
edit: decided to run quadrant while typing a few times
with SetCPU set to ondemand scores: 1455, 1637, 1576
with SetCPU set to interactive scores: 1505, 1679, 1723 (my personal best), 1677
Last edited by -AspenSTi-; August 27th, 2010 at 06:40 PM.
The Following User Says Thank You to -AspenSTi- For This Useful Post:
I am new to the ROM/THEME scene. I just installed LFY1.5 and the Blueberry theme. My homescreen is different than what is on the 1st page and there are only 3 screen not 5. Did I do something wrong? here is a screenshot of my droid.
Last edited by javaman70; August 27th, 2010 at 08:05 PM.
I am new to the ROM/THEME scene. I just installed LFY1.5 and the Blueberry theme. My homescreen is different than what is on the 1st page and there are only 3 screen not 5. Did I do something wrong? here is a screenshot of my droid.
it looks like you downloaded the tangerine theme. to adjust the number of screens go into the launcher setting under homepages and you can adjust the number of screens there.
My twitter app keeps asking me to log in, I log in check stuff, then if I go back to it it's still logged in, but if I don't go on for a while, like couple hours, then try, it has logged off on it's own and asks for my log in. Anyone else having this issue?
Not sure if someone answered this as I have yet to read through all the pages...
Check in settings > accounts and sync and if twitter is not listed add it as a new account. I had to do this with 1.4 and after install.
If it's not set up to sync it asks for login every time
I gotta say.. this ROM is extremely smooth, however I am also having the Market crash after install of any APK, even from non-market installs. I did a full wipe through clockwork so there was no residual files of any kind, but on Tangerine the market is the only thing I am having problems with.
I'm getting ready to try wiping and flashing again, but just thought I'd throw another voice out there currently having this issue.
So I was experiencing the lag using Slayer's 1000mhz kernel and couldn't take it anymore. I redownloaded it through ROM manager, wiped everything in recovery, and while hunting for the zip the phone just died. Battery pulls, plugging/unplugging, I can't get it to respond. Two questions:
1-any idea how to revive my phone?
2-where in the world did ROM manager download the zip to?
UPDATE:
Okay, so apparently either the Droid doesn't charge in recovery, or it wasn't getting enough juice from my laptop. I swapped batteries with my wife and we are good to go.
I'm back in recovery, now where is that zip!?
Last edited by njKeever; August 27th, 2010 at 10:58 PM.
Reason: update
Device(s): See my signature...this section isn't big enough anymore!
Carrier: Not Provided
Thanks: 1,789
Thanked 1,587 Times in 858 Posts
Quote:
Originally Posted by njKeever
So I was experiencing the lag using Slayer's 1000mhz kernel and couldn't take it anymore. I redownloaded it through ROM manager, wiped everything in recovery, and while hunting for the zip the phone just died. Battery pulls, plugging/unplugging, I can't get it to respond. Two questions:
1-any idea how to revive my phone?
2-where in the world did ROM manager download the zip to?
UPDATE:
Okay, so apparently either the Droid doesn't charge in recovery, or it wasn't getting enough juice from my laptop. I swapped batteries with my wife and we are good to go.
I'm back in recovery, now where is that zip!?
You need AC power when you phone has "died" and has no juice left.
That's why I don't download ROMs via ROM Manager...I can never find them either. Just gotta navigate through the folders listed here:
sdcard > clockworkmod > downloads > android.markjohnson.us (parent folder for Liquid's ROMs and themes)
__________________
Myself: Galaxy Nexus, Droid Razr M, Transformer, Logitech Revue, Sony Blu-ray Player with Google TV
Wife and Kids: Galaxy Nexus, Apple iPad, Galaxy Player 4.0, B&N NookColor
Retired: Thunderbolt, Droid Pro, Fascinate, Motorola Droid 1, 3 & 4, Galaxy Tab (7" WiFi), Archos 70
Last edited by UBRocked; August 27th, 2010 at 11:09 PM.
Reason: Found it LOL
Okie dokie folkies, played with some diff kernels and these are the results I've gotten. I'm not gonna bother with benchmarks, as even from my review I was still getting pretty good ones.
Chevy's: Chevy's kernels have never really liked my Droid, so I didn't expect much. It'll load, but I can only get so much performance, and I can't get above 1GHz.
Jake's: Was my go to kernel for quite some time, but couldn't get past the "M" logo.
jdlfg's: Well how bout that? No lag. Ran nice and smooth, the way it should. However, it would randomly reboot very often and more than a few FCs. Very unstable but some hope, though.
slayer's v.1.6: Again, no lag. Wonderful, might be narrowing down the issue. But like jdlfg's, many FCs and frequent random reboots.
original slayher's LFY1.5: Basically just reflashed the ROM and kernel, and this time there was less lag, but it was still present. And it got worse after a full day and then some. Also, battery drained very fast, yet again, so I dunno.
I see slayher has updated kernels so I'm gonna try that out and I'll report back, but I wanted to get this out here.
__________________ "How many bloody Gs are there?"
The Following 3 Users Say Thank You to YankeeDudeL For This Useful Post:
last night i reflashed 1.5 with smoked LFY and things were running great. then reflashed slayher lfy 1.5 1100 and thats were the lag came back, and it came back bad. went back to slayher 1.6 1100 and things seemed pretty good until i got up and the battery went from 90% at 2:00am to 40% at 7:00 am. it was the cell standby and phone idle.
Flashed this last night through Rom Manager, wiped/reset my phone and selected the Galaxy S theme. I had continuous force closes of the Market and the Download sync that Froyo introduced (forget the name). I tried a few things and basically just wiped, set my phone up again with just plain LFY, got everything installed then flashed the Galaxy S theme separately. Now I get non-stop force closes when trying to access my volumes under settings->sounds, anyone else experiencing this issue?
This is my first time using this rom/kernel and its extremely fast, hopefully any bugs there might be can be worked out.
i get that there is a lotta support for this rom, and that is great,but the problem is that it really needs it. there seem to be more negative posts than positive. i really liked liquid 1.4 but 1.5 took a step backwards i think. llike yankeedudel said when 1.5 works its great! but that isn't all the time which creates stability problems. im hoping 1.6 will have some of the bugs worked out because this could have been a really great rom
Okie dokie folkies, played with some diff kernels and these are the results I've gotten. I'm not gonna bother with benchmarks, as even from my review I was still getting pretty good ones.
Chevy's: Chevy's kernels have never really liked my Droid, so I didn't expect much. It'll load, but I can only get so much performance, and I can't get above 1GHz.
Jake's: Was my go to kernel for quite some time, but couldn't get past the "M" logo.
jdlfg's: Well how bout that? No lag. Ran nice and smooth, the way it should. However, it would randomly reboot very often and more than a few FCs. Very unstable but some hope, though.
slayer's v.1.6: Again, no lag. Wonderful, might be narrowing down the issue. But like jdlfg's, many FCs and frequent random reboots.
original slayher's LFY1.5: Basically just reflashed the ROM and kernel, and this time there was less lag, but it was still present. And it got worse after a full day and then some. Also, battery drained very fast, yet again, so I dunno.
I see slayher has updated kernels so I'm gonna try that out and I'll report back, but I wanted to get this out here.
wow a lot of problems for you an any kernel..... your droid dying
anyway this rom for me is still blowing away cm6 3 on any kernel, from stock kernel to slayher's 1.5 no lag and no FC's.
So I was experiencing the lag using Slayer's 1000mhz kernel and couldn't take it anymore. I redownloaded it through ROM manager, wiped everything in recovery, and while hunting for the zip the phone just died. Battery pulls, plugging/unplugging, I can't get it to respond. Two questions:
1-any idea how to revive my phone?
2-where in the world did ROM manager download the zip to?
UPDATE:
Okay, so apparently either the Droid doesn't charge in recovery, or it wasn't getting enough juice from my laptop. I swapped batteries with my wife and we are good to go.
I'm back in recovery, now where is that zip!?
You are correct, the droid DOES NOT charge via USB while in recovery. Also, as someone else stated, if it's "dead", you'll have to use AC to get enough juice to recharge. Glad you got it back though
__________________
Larry L. Wheat II
President/Co-founder
A Butterfly's Touch http://www.abutterflystouch.org
Next time you think you're perfect, try walking on water.
I just want to emphasize how awesome this ROM is now the second time around. It's faster and smoother than when I ran SholesMod, DroidMod, Cyanogen, Kangerade, or Lithium. I have had no FC or reboots.
For those with problem I would encourage you to try again from the ground up and try different themes and kernels. Redownload, wipe, and flash, it's worth it!
Not sure if someone answered this as I have yet to read through all the pages...
Check in settings > accounts and sync and if twitter is not listed add it as a new account. I had to do this with 1.4 and after install.
If it's not set up to sync it asks for login every time
if all else fails reflash LFY 1.5 then smoked frozen then re-enter your stuff and all should be fixed. That's what I had to do earlier today b/c i really wanted the black twitter skin to match that blackNbold theme.
**BETTER WAY** if you really have a problem with your Twitter not opening right (meaning) having to sign in every time then the easiest way to fix it is go to settings > accounts and sync and if twitter is not syncing properly delete the account and when you enter your information again you should see it sync up properly (at least mine worked)
Could you see if you can go into Settings -> Sound Settings -> Volume and see if it force closes by chance? I've reloaded like 3 times now.
Mine does this too. Wasn't sure why, but luckily it's something minor enough to not make me reflash anything right now. I don't play much media on my phone, and notification volume is linked with my ringer volume.. I just use the physical volume adjusters.
I can't say that it wouldn't be nice if it did work though.
Mine does this too. Wasn't sure why, but luckily it's something minor enough to not make me reflash anything right now. I don't play much media on my phone, and notification volume is linked with my ringer volume.. I just use the physical volume adjusters.
I can't say that it wouldn't be nice if it did work though.
Yeah I wasn't worried about Media and Volume, but I need to have my notification WAY low and wanted to adjust it. I went to CM6 for now. I'm just glad I wasn't the only one. I flashed this probably 10 different ways trying to fix it, I narrowed it down to the Gala S Theme. Every version of it, NoMarket, Stock Font, and the other font caused the issue, and since Liquid has no control over it, I decided to try CM6 for now.
My results:
Flashed LFY v1.5 with full data wipe. Using NO themes.
Kernels and results:
Original with LFY: laggy (had not started using quadrant yet)
LFY-1200 boot loop
Slayher 1200 v1.6 boot loop
P3 125-1100 LV ondemand, Quadrant: 1037
P3 250-1250 LV ondemand, Quadrant: 1149
P3 250-1250 LV performance, Quadrant 1690 (staying with this one for awhile)
I was just about to give up on LFY, I installed it yesterday along with Slayhers 1.1 kernal and it lagged, lagged, lagged! I tried playing with the LP settings and it may of helped some but I was still plagued with lag even though the Quadrant scores were decent. I read every post in the thread and was getting ready to flash back to BB when I saw that a few people had luck trying a different kernal, did I mention that I had lag?? So I flashed Slayhers 1.2 Ghz even though I've never had luck with a 1.2 Ghz kernal and Froyo. Damn if it didn't boot right up and now it seems to be running rather fast...and no LAG! I'll give it a little time and see what happens but so far so good. The temps seem okay and we'll see what battery life brings but I was having great battery life with the laggy 1.1 kernal. So, if you're having lag issues try another kernal...it very well may help! I just ran Quadrant and scored a 1711...does that seem about right?
Okay, it's been a couple of days since I wrote the above post so I figured I'd go ahead and write a quick review about this ROM. After reloading Slayhers 1200 kernal it has been running great. The transitions are buttery smooth and everything opens quickly with very little to no lag. I have not had any force closures and everything seems to be operating correctly and without issues. Battery life has been great and the temps run cool...now if I put a good load on the processor the temps will climb but they retreat quickly once the load is released. I can run Quadrant at least three times in a row without the temps causing a freeze or reboot...and that's a pretty hefty stress test. Slayhers kernal is the first one over 1.0 Ghz that I have been able to run stable with FroYo and the below Quadrant scores show it's rather fast so he's running some pretty clean code, yeah for 1.2 Ghz! I used the "Smoked" theme for a base and tweaked it to my personal liking and it has been great too. I kind of kanged the Smoked and NexTheme together to create my "Blackwood" theme...they really look and play well together IMO. So, in the end I will be keeping this combo on my phone for a while, it's fast, does everything I want it to do and looks nice! Great work by all the parties envolved! I gave this a 4 out of 5 and would have given it a 5 if I hadn't incountered problems with the 1.0 Ghz kernal...once something this nice works straight out of the box it will get the elusive 5!
Device(s): RAZR MAXX;
DROID BIONIC (now the wife's);
Moto (OG) DROID (now my son's)
Carrier: Verizon
Thanks: 82
Thanked 374 Times in 220 Posts
GoodBye 1.5
My final word...
This weekend, I flashed this ROM for the third time. I was having issues with the first two installs ... Swype would NOT install, and general sluggishness all around. Yesterday, I wiped/formatted every partition and reinstalled. I flashed Slayher's 1.1 kernel. Then I reinstalled all of my apps and restored their associated data. Finally, I flashed the Black Bar theme. At that point, I was very happy. Since then, it's all gone downhill. This ROM is just ... dare I say it? ... bad. After this post, I'm going to restore 1.4 and wait for 1.6 to be released, or maybe flash Pete's new ROM upon release. Maybe it's just my DROID, I don't know. I do know that I've flashed and themed more ROMs than most, so it''s not like I don't know what I'm doing or have plenty of ROMs to compare.
Sorry LiQuiD.
__________________
- Joe
RAZR MAXX ... Love it!
The Following User Says Thank You to messenger13 For This Useful Post:
OMG, just for grins I ran quadrant a few times on that P3 250-1250 lv kernel.
1517, 1717, 1799, 1719. Wow! Temp is about 100.
I wish you could try out my kernel ;(
or maybe you should try out the 1250. Only reason I am saying that is because I managed to get 1803 on quad with the interactive gov.
I have had 0 problems with this rom. My phone is working absolutely better than I have ever had it running before. I am currently running 1.5 with the blueberry theme slayher's 1100 kernel and launcher pro (free). My phone is extremely fast and I see absoutely no lag using my phone at 1.1 ghz (both min and max in interactive mode I drop the speed down to 600 max 400 min when the screen is off) I get great battery life, I can go from 7am to about 9pm with heavy use. 1.4 I was only able to go 7am to 6pm without charging. My quad scores have been averaging around 1500 with a average cpu temp of 27C and a max of 32C. With that said I am going to download 1200 and see if my phone behaves with that. All I can say is that Liquid has built a great rom and Slayher's kernels are rocking my phone. I'll keep you updated as I go to 1200.
**Update** Went to 1200 don't seem to be seeing any problems but my quad score isn't quite what I thought it would be averaging about 1630 with min and max set to 1200 and interactive set. **Update 2** Maybe I spoke to soon now I am averaging 1740 with a high of 1795 so far so far haven't gone past 34C temp either. Thanks again for the awesome Kernel Slayher
Last edited by kujayhawks77; August 30th, 2010 at 01:44 AM.
Tried out the newest kernel and it's pretty similar on my Droid to the last one. So, I dunno. Guess this version don't like me. LFY1.4 with slayher's kernel was def fast, so take that as you will. Def looking forward to 1.6, though.
For me the stock 800mhz kernel was very smooth, but i like to run at least 1000mhz. the slayher kernels all had some lag, but they are as smooth as a babies bottom on 1.4. So i tried Chevy's 1100mhz and now 1.5 is very smooth.
For me the stock 800mhz kernel was very smooth, but i like to run at least 1000mhz. the slayher kernels all had some lag, but they are as smooth as a babies bottom on 1.4. So i tried Chevy's 1100mhz and now 1.5 is very smooth.
The lag you were experiencing may have been due to Compcache. Its not for everyone, and I dont think Chevy has Compcache enabled in his setups
I wish you could try out my kernel ;(
or maybe you should try out the 1250. Only reason I am saying that is because I managed to get 1803 on quad with the interactive gov.
I'm running your 1200 on CM6, its fast and this is the first time I could flash that high. Battery life so far seems low but I'll give it a few more days. Waiting for 1.6 because I had so many troubles with 1.5, really looking forward to it.