Go Back   Android Forums > Android Phones > LG Marquee > Marquee - All Things Root

Get excited for the Samsung Galaxy S5! Find everything you need and discuss it in our Galaxy S5 Forum!

Like Tree9Likes
  • 1 Post By imfm
  • 1 Post By tombob
  • 1 Post By lMonsterl
  • 1 Post By lMonsterl
  • 1 Post By wetbiker7
  • 1 Post By wetbiker7
  • 1 Post By MEB
  • 1 Post By wetbiker7
  • 1 Post By pyccki

test: Reply
 
LinkBack Thread Tools
Old March 10th, 2012, 01:20 PM   #1 (permalink)
Member
Thread Author (OP)
 
imfm's Avatar
 
Join Date: Sep 2011
Location: Texas
Posts: 154
 
Device(s): LG855 Marquee Boost/Bloodwan CTMOD/Bloodawn HyperKernel/ndno Overclock Kernel/imfm 3D boost
Carrier: Not Provided

Thanks: 49
Thanked 84 Times in 32 Posts
Default [GUIDE] CDMA Workshop and Manual PRL Updates

I can verify that after some trial and error I finally was able to manually push a PRL to the Marquee using this method.

Steps:

1) Get your MSL. As far as I know, the only way to get your MSL with the Marquee is to call boost. You should be able to get it easily by telling them you want to do a factory reset.

2) Install all three LG driver packages. Go here:
LG LGLS855 Support: Find Manuals & Warranty Info | LG USA
Download the LG Mobile support tool found in the middle of the page.

3) Install the software, tell it you want to download drivers for the LS 855. It goes through an awkward install process that should download 3 driver packages.

4) After the drivers are installed, put your phone into DM by dialing Dial ##7678#, entering your MSL, and checking the box that says DM mode. DO NOT REBOOT.

5) Now when you plug your phone into your PC, it should install a bunch of drivers including one for a virtual COM port.

6) Put your phone in USB Debug Mode: Settings -> Applications -> development -> USB Debugging

7) Find a PRL file you want to use. You can find a bunch of them here:
http://androidforums.com/attachments/galaxy-prevail-all-things-root/27048d1326936792-1984kbps-speedtest-net-results-after-couple-tweaks-prl.zip

8) Now you are ready to use CMDA Workshop. Follow the instructions here starting at "1. Open CDMA-Workshop:":
Idiot's Guide: Flashing PRLs on the Precedent
Substitute LG xxx whatever for Samsung xxx whatever in the steps, and skip step "2. goto your Phones DialPad and dial ##8778# -> enter your MSL -> Select USB:"

Notes:
If you are using MarkyBeats, you should be able to flash PRL without switching to DM.

Also, you might want to try DFS instead of CDMA workshop. My trial ran out and I couldn't find a workaround, but I was able to flash a new PRL using this guide:
[Guide]How to change your MSL and PRL (Not CDMA Workshop)
Using DFS, connect to modem first, then serial port, then proceed as instructed.

THANKS, DONATIONS, AND HUGS APPRECIATED (BUT ESPECIALLY DONATIONS)
Donate Link:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=X356LXTFRD9GE
Capn069 likes this.

imfm is offline  
Last edited by imfm; May 8th, 2012 at 04:33 PM. Reason: Update
Reply With Quote
The Following 2 Users Say Thank You to imfm For This Useful Post:
jaymzway (October 5th, 2013), tombob (May 5th, 2012)
sponsored links
Old March 10th, 2012, 01:27 PM   #2 (permalink)
Member
 
TryingToRoot's Avatar
 
Join Date: Sep 2011
Location: Savannah, Ga
Posts: 296
 
Device(s): LG Marquee, Chicken Tits 3.6.5, with Hyper Kernel 1.5, I am Bloodawned out, thanks man
Carrier: Not Provided

Thanks: 46
Thanked 115 Times in 79 Posts
Default Msl

To get your msl open terminal and type "getprop ril.msl" then hit enter
TryingToRoot is offline  
Reply With Quote
Old March 10th, 2012, 01:30 PM   #3 (permalink)
Member
Thread Author (OP)
 
imfm's Avatar
 
Join Date: Sep 2011
Location: Texas
Posts: 154
 
Device(s): LG855 Marquee Boost/Bloodwan CTMOD/Bloodawn HyperKernel/ndno Overclock Kernel/imfm 3D boost
Carrier: Not Provided

Thanks: 49
Thanked 84 Times in 32 Posts
Default

Quote:
Originally Posted by TryingToRoot View Post
To get your msl open terminal and type "getprop ril.msl" then hit enter
On the Marquee this didn't work for me.
imfm is offline  
Reply With Quote
Old March 10th, 2012, 01:35 PM   #4 (permalink)
Member
 
TryingToRoot's Avatar
 
Join Date: Sep 2011
Location: Savannah, Ga
Posts: 296
 
Device(s): LG Marquee, Chicken Tits 3.6.5, with Hyper Kernel 1.5, I am Bloodawned out, thanks man
Carrier: Not Provided

Thanks: 46
Thanked 115 Times in 79 Posts
Default

I think you are right. I originally called and got mine from boost but remembered that step from the prevail, I should have tried it first.thank you for the correction
TryingToRoot is offline  
Reply With Quote
Old March 10th, 2012, 04:21 PM   #5 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

ive tried every trick to get msl on the marquee. even 2 i was able to come up with were both wrong. its a pain in the a##
__________________
Like what u see? Hit "Thanks"
------------------
Donations Appreciated! PAYPAL
GitHub
lMonsterl is offline  
Reply With Quote
Old March 19th, 2012, 09:52 PM   #6 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

This strategy WORKS to get MSL:


download aLogcat (free) from market. Open it and start the log. Hit the "home" button on the phone and go to dialer and enter ##3282# then hit "advanced" hit "view". Then hit the back button on your phone and go to "data profile" hit "edit" and enter 000000. It will say it is wrong, hold the home button and switch back to aLogcat and pause it. Hit "filter" and type msl


should be good from there on with cdma workshop
lMonsterl is offline  
Reply With Quote
The Following 6 Users Say Thank You to lMonsterl For This Useful Post:
imfm (March 20th, 2012), lunigma (June 2nd, 2013), mkfryan (July 10th, 2012), Phrant1c (June 3rd, 2012), The~Skater~187 (July 17th, 2012), tombob (June 30th, 2012)
Old March 20th, 2012, 04:16 PM   #7 (permalink)
Junior Member
 
Join Date: Feb 2012
Posts: 27
 
Device(s):
Carrier: Not Provided

Thanks: 12
Thanked 3 Times in 2 Posts
Default

Quote:
4) After the drivers are installed, put your phone into DM by dialing Dial ##7678#, entering your MSL, and checking the box that says DM mode. DO NOT REBOOT.
i couldnt get my fone into DM using this code. is there some other code i could use? i am using the Undeniable ROM.
wartorn is offline  
Reply With Quote
Old March 20th, 2012, 04:30 PM   #8 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

Quote:
Originally Posted by wartorn View Post
i couldnt get my fone into DM using this code. is there some other code i could use? i am using the Undeniable ROM.
just do it with your phone off, or in recovery
lMonsterl is offline  
Reply With Quote
The Following User Says Thank You to lMonsterl For This Useful Post:
wartorn (March 20th, 2012)
Old April 29th, 2012, 06:06 PM   #9 (permalink)
Member
 
munguse's Avatar
 
Join Date: Nov 2011
Location: NorCal
Gender: Male
Posts: 169
 
Device(s): Samsung Galaxy S3-MOAR v9.0.1
Carrier: Boost Mobile

Thanks: 42
Thanked 32 Times in 28 Posts
Question

There is no option to go into DM Mode with the ##7678# code, just Development Mode. Or are they the same


Quote:
Originally Posted by lMonsterl View Post
just do it with your phone off, or in recovery
Tried that but all that shows up in cdma workshop are these 2 ports and
can't connect to either because they need the registered version. Anyone with ideas?



These are the drivers that are installed.
munguse is offline  
Reply With Quote
Old April 29th, 2012, 09:20 PM   #10 (permalink)
Member
Thread Author (OP)
 
imfm's Avatar
 
Join Date: Sep 2011
Location: Texas
Posts: 154
 
Device(s): LG855 Marquee Boost/Bloodwan CTMOD/Bloodawn HyperKernel/ndno Overclock Kernel/imfm 3D boost
Carrier: Not Provided

Thanks: 49
Thanked 84 Times in 32 Posts
Default

Quote:
Originally Posted by munguse View Post
There is no option to go into DM Mode with the ##7678# code, just Development Mode. Or are they the same




Tried that but all that shows up in cdma workshop are these 2 ports and
can't connect to either because they need the registered version. Anyone with ideas?



These are the drivers that are installed.
If you are using MarkyBeats, you should be able to flash PRL without switching to DM. Also, you might want to try DFS instead of CDMA workshop. I was able to flash a new PRL using this guide:
http://androidforums.com/warp-all-things-root/532142-guide-how-change-your-msl-prl-not-cdma-workshop.html

P.S. Using DFS, connect to modem first, then serial port, then proceed as instructed.
imfm is offline  
Reply With Quote
The Following 4 Users Say Thank You to imfm For This Useful Post:
lMonsterl (May 1st, 2012), munguse (April 29th, 2012), The~Skater~187 (July 18th, 2012), tombob (May 5th, 2012)
sponsored links
Old April 29th, 2012, 11:14 PM   #11 (permalink)
Member
 
munguse's Avatar
 
Join Date: Nov 2011
Location: NorCal
Gender: Male
Posts: 169
 
Device(s): Samsung Galaxy S3-MOAR v9.0.1
Carrier: Boost Mobile

Thanks: 42
Thanked 32 Times in 28 Posts
Default

Quote:
Originally Posted by imfm View Post
If you are using MarkyBeats, you should be able to flash PRL without switching to DM. Also, you might want to try DFS instead of CDMA workshop. I was able to flash a new PRL using this guide:
http://androidforums.com/warp-all-things-root/532142-guide-how-change-your-msl-prl-not-cdma-workshop.html

P.S. Using DFS, connect to modem first, then serial port, then proceed as instructed.
Worked great!!
munguse is offline  
Reply With Quote
The Following 2 Users Say Thank You to munguse For This Useful Post:
phreak311 (April 30th, 2012), tombob (May 5th, 2012)
Old April 30th, 2012, 12:03 AM   #12 (permalink)
Member
 
Join Date: Mar 2012
Location: West Virginia
Gender: Male
Posts: 102
 
Device(s): Samsung Galaxy S3. Motorola Atrix HD Motorola Droid Razr Max
Carrier: Not Provided

Thanks: 16
Thanked 9 Times in 8 Posts
Default

Quote:
Originally Posted by munguse View Post
Worked great!!
I couldn't get CDMA workshop to work for pushing a new PRL. I'm going to try this. Thank you!
phreak311 is offline  
Reply With Quote
Old May 1st, 2012, 01:58 AM   #13 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

Newest sprint business PRL provided by mannytwotwo @ xda. 12120 PRL

http://forum.xda-developers.com/attachment.php?attachmentid=1014223&d=1334870275
lMonsterl is offline  
Reply With Quote
The Following User Says Thank You to lMonsterl For This Useful Post:
tombob (May 5th, 2012)
Old May 5th, 2012, 04:03 PM   #14 (permalink)
Member
 
tombob's Avatar
 
Join Date: Feb 2012
Posts: 154
 
Device(s): LG Marquee
Carrier: Sprint

Thanks: 241
Thanked 40 Times in 32 Posts
Default

Thanks guys, I was able to successfully flash this prl using DFS. Unfortunately it did squat for my sorry-ass download speeds
tombob is online now  
Reply With Quote
Old June 3rd, 2012, 08:14 PM   #15 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

Sprint Corporate 12121
Attached Files
File Type: zip 12121.zip (4.1 KB, 66 views)
lMonsterl is offline  
Reply With Quote
The Following User Says Thank You to lMonsterl For This Useful Post:
tombob (June 3rd, 2012)
Old June 3rd, 2012, 09:16 PM   #16 (permalink)
Member
 
Phrant1c's Avatar
 
Join Date: May 2012
Location: Chicago
Posts: 283
 
Device(s): LG-LG855 Marquee (Boost)
Carrier: Not Provided

Thanks: 41
Thanked 76 Times in 56 Posts
Default

Quote:
Originally Posted by lMonsterl View Post
This strategy WORKS to get MSL:


download aLogcat (free) from market. Open it and start the log. Hit the "home" button on the phone and go to dialer and enter ##3282# then hit "advanced" hit "view". Then hit the back button on your phone and go to "data profile" hit "edit" and enter 000000. It will say it is wrong, hold the home button and switch back to aLogcat and pause it. Hit "filter" and type msl


should be good from there on with cdma workshop
this worked very easily to get the MSL. Took all of maybe 30 seconds.
Phrant1c is offline  
Reply With Quote
Old June 13th, 2012, 07:12 PM   #17 (permalink)
Member
 
tombob's Avatar
 
Join Date: Feb 2012
Posts: 154
 
Device(s): LG Marquee
Carrier: Sprint

Thanks: 241
Thanked 40 Times in 32 Posts
Default

Quote:
Originally Posted by tombob View Post
Thanks guys, I was able to successfully flash this prl using DFS. Unfortunately it did squat for my sorry-ass download speeds
So a month ago this method worked great for me to push a prl, but now I can't seem to get it to work. After starting DFS I can get the modem to open, but the serial port doesn't ever seem to open. Any suggestions of what I may be doing wrong? Thanks.
tombob is online now  
Reply With Quote
Old June 13th, 2012, 07:17 PM   #18 (permalink)
AF Contributor
 
wetbiker7's Avatar
 
Join Date: Jun 2011
Location: Southern California
Gender: Male
Posts: 6,666
 
Device(s): SamsungGalaxy S3, LG Marquee, Asus TF300T 32GB w/ dock, SamsungGalaxy Prevail
Carrier: Boost

Thanks: 1,671
Thanked 2,703 Times in 1,824 Posts
Default

Quote:
Originally Posted by tombob View Post
So a month ago this method worked great for me to push a prl, but now I can't seem to get it to work. After starting DFS I can get the modem to open, but the serial port doesn't ever seem to open. Any suggestions of what I may be doing wrong? Thanks.

Have you changed ROMs? This requires a stock based ROM to work.


Try flashing the Half Ass ROM or CTMod 2.5. Then see what you get.
__________________
Is there a reason you're not rooted yet??
Do the right thing and hit THANKS!
wetbiker7 is online now  
Reply With Quote
The Following User Says Thank You to wetbiker7 For This Useful Post:
tombob (June 13th, 2012)
Old June 13th, 2012, 07:20 PM   #19 (permalink)
Member
 
tombob's Avatar
 
Join Date: Feb 2012
Posts: 154
 
Device(s): LG Marquee
Carrier: Sprint

Thanks: 241
Thanked 40 Times in 32 Posts
Default

Quote:
Originally Posted by wetbiker7 View Post
Have you changed ROMs? This requires a stock based ROM to work.


Try flashing the Half Ass ROM or CTMod 2.5. Then see what you get.
That may be it, running CTMod 3.6.5. Thanks.

edit: That was it, thanks. I flashed Blood's ZVC stock rooted and DFS connected first try. Pushed the prl no problem, rebooted and confirmed voice and data, then restored my backup. Back to where I was but with 12121 prl. Everything is right with the world.
wetbiker7 likes this.
tombob is online now  
Last edited by tombob; June 13th, 2012 at 08:43 PM.
Reply With Quote
Old June 13th, 2012, 09:14 PM   #20 (permalink)
AF Contributor
 
wetbiker7's Avatar
 
Join Date: Jun 2011
Location: Southern California
Gender: Male
Posts: 6,666
 
Device(s): SamsungGalaxy S3, LG Marquee, Asus TF300T 32GB w/ dock, SamsungGalaxy Prevail
Carrier: Boost

Thanks: 1,671
Thanked 2,703 Times in 1,824 Posts
Default

Quote:
Originally Posted by tombob View Post
That may be it, running CTMod 3.6.5. Thanks.

edit: That was it, thanks. I flashed Blood's ZVC stock rooted and DFS connected first try. Pushed the prl no problem, rebooted and confirmed voice and data, then restored my backup. Back to where I was but with 12121 prl. Everything is right with the world.

Right on man. Glad it worked for ya.
wetbiker7 is online now  
Reply With Quote
sponsored links
Old June 19th, 2012, 02:07 PM   #21 (permalink)
Junior Member
 
Join Date: Jun 2012
Posts: 19
 
Device(s): Boost LG Marquee w/ CTmod 3.6.5, hyper kernel, hc theme. Lepan tc970 w/ CM7.
Carrier: Not Provided

Thanks: 1
Thanked 1 Time in 1 Post
Footmouth I need professional help!

I was messing around in the LG Hidden Folder, just under the NAI settings is the PPP settings. I switched the PPP Carrier from Sprint to HTK_Sprint. The phone immediately rebooted and I then had no data service. I switched it back and still, no data. I could call and text until I tried to fix it. I tried the ##72786# -> MSL -> yes trick and that took all calling and texting capabilities away. So now I have a wifi only Marquee. I am running ctmod 6.5 with the unleashed kernel also with the HC theme. I changed back to stock and tried again, still no change. It tries the hands free activation but can't contact the network. What do I do?
wachoface is offline  
Reply With Quote
Old June 19th, 2012, 05:23 PM   #22 (permalink)
AF Contributor
 
Capn069's Avatar
 
Join Date: Aug 2011
Location: Georgia
Gender: Male
Posts: 233
 
Device(s): S3, Nexus 7 2013
Carrier: Boost Mobile

Thanks: 172
Thanked 69 Times in 48 Posts
Default

I have a question for the developers. Does anyone know if it is possible to create a script such as the DM-CM7 ran in Script Manager for the Prevail to put the phone into DM without having to swap roms? This would make for an easy way to change PRL's with DFS or CDMA. I don't know if anyone was working on one or not.
Capn069 is offline  
Last edited by Capn069; June 19th, 2012 at 05:40 PM.
Reply With Quote
Old June 19th, 2012, 06:35 PM   #23 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

Quote:
Originally Posted by Capn069 View Post
I have a question for the developers. Does anyone know if it is possible to create a script such as the DM-CM7 ran in Script Manager for the Prevail to put the phone into DM without having to swap roms? This would make for an easy way to change PRL's with DFS or CDMA. I don't know if anyone was working on one or not.
its a different file path. the stock needs no script at all, dont even have to change any hidden menu settings.

Im not sure if ctmod just doesnt have it, or if its in a different spot
lMonsterl is offline  
Reply With Quote
Old June 20th, 2012, 10:28 AM   #24 (permalink)
AF Contributor
 
Capn069's Avatar
 
Join Date: Aug 2011
Location: Georgia
Gender: Male
Posts: 233
 
Device(s): S3, Nexus 7 2013
Carrier: Boost Mobile

Thanks: 172
Thanked 69 Times in 48 Posts
Default

I was just wondering because I can swap the PRL on my Prevail in like 30 seconds with the script and dfs. Is there a way to get the Marquee into Dm without swapping roms? I run CTMod 3.6.5 with hyperkernel 1.5.
Capn069 is offline  
Last edited by Capn069; June 20th, 2012 at 10:30 AM.
Reply With Quote
Old June 20th, 2012, 12:45 PM   #25 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

Quote:
Originally Posted by Capn069 View Post
I was just wondering because I can swap the PRL on my Prevail in like 30 seconds with the script and dfs. Is there a way to get the Marquee into Dm without swapping roms? I run CTMod 3.6.5 with hyperkernel 1.5.
Not that I've found yet. I just restore a backup then revert back after
Capn069 likes this.
lMonsterl is offline  
Reply With Quote
Old June 20th, 2012, 01:00 PM   #26 (permalink)
AF Contributor
 
wetbiker7's Avatar
 
Join Date: Jun 2011
Location: Southern California
Gender: Male
Posts: 6,666
 
Device(s): SamsungGalaxy S3, LG Marquee, Asus TF300T 32GB w/ dock, SamsungGalaxy Prevail
Carrier: Boost

Thanks: 1,671
Thanked 2,703 Times in 1,824 Posts
Default

Quote:
Originally Posted by Capn069 View Post
I was just wondering because I can swap the PRL on my Prevail in like 30 seconds with the script and dfs. Is there a way to get the Marquee into Dm without swapping roms? I run CTMod 3.6.5 with hyperkernel 1.5.
Quote:
Originally Posted by lMonsterl View Post
Not that I've found yet. I just restore a backup then revert back after

Me too, Monster. Really easy with the Non-CDMA Workshop method too.
wetbiker7 is online now  
Reply With Quote
Old June 30th, 2012, 03:43 AM   #27 (permalink)
Senior Member
 
lMonsterl's Avatar
 
Join Date: Jul 2011
Location: U.S.
Posts: 1,313
 
Device(s): | Galaxy SIII-d2spr | CM10 |
Carrier: Not Provided

Thanks: 209
Thanked 603 Times in 310 Posts
Default

12123 newest sprint corporate

http://forum.xda-developers.com/attachment.php?attachmentid=1098887&d=1338553109
wetbiker7 likes this.
lMonsterl is offline  
Reply With Quote
The Following 4 Users Say Thank You to lMonsterl For This Useful Post:
dthomas510 (July 4th, 2012), tombob (June 30th, 2012), wetbiker7 (June 30th, 2012), wyelkins (July 4th, 2012)
Old June 30th, 2012, 04:08 AM   #28 (permalink)
AF Contributor
 
wetbiker7's Avatar
 
Join Date: Jun 2011
Location: Southern California
Gender: Male
Posts: 6,666
 
Device(s): SamsungGalaxy S3, LG Marquee, Asus TF300T 32GB w/ dock, SamsungGalaxy Prevail
Carrier: Boost

Thanks: 1,671
Thanked 2,703 Times in 1,824 Posts
Default

Quote:
Originally Posted by lMonsterl View Post

Gonna flash MB and try it out. Thanks Bro!
lMonsterl likes this.
wetbiker7 is online now  
Reply With Quote
Old June 30th, 2012, 06:52 AM   #29 (permalink)
AF Contributor
 
wetbiker7's Avatar
 
Join Date: Jun 2011
Location: Southern California
Gender: Male
Posts: 6,666
 
Device(s): SamsungGalaxy S3, LG Marquee, Asus TF300T 32GB w/ dock, SamsungGalaxy Prevail
Carrier: Boost

Thanks: 1,671
Thanked 2,703 Times in 1,824 Posts
Default

Just flashed the new PRL about 30 minutes ago and I'm at full signal. Hope it stays that way. Thx again bro!
lMonsterl likes this.
wetbiker7 is online now  
Reply With Quote
Old July 17th, 2012, 10:36 PM   #30 (permalink)
MEB
New Member
 
Join Date: Jun 2012
Posts: 12
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by wachoface View Post
I was messing around in the LG Hidden Folder, just under the NAI settings is the PPP settings. I switched the PPP Carrier from Sprint to HTK_Sprint. The phone immediately rebooted and I then had no data service. I switched it back and still, no data. I could call and text until I tried to fix it. I tried the ##72786# -> MSL -> yes trick and that took all calling and texting capabilities away. So now I have a wifi only Marquee. I am running ctmod 6.5 with the unleashed kernel also with the HC theme. I changed back to stock and tried again, still no change. It tries the hands free activation but can't contact the network. What do I do?
This happened to my moms phone, any help would be greatly appreciated since she didn't pay for insurance and sprint wants $35 to swap it.
MEB is offline  
Reply With Quote
sponsored links
Old July 17th, 2012, 11:02 PM   #31 (permalink)
MEB
New Member
 
Join Date: Jun 2012
Posts: 12
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by MEB View Post
This happened to my moms phone, any help would be greatly appreciated since she didn't pay for insurance and sprint wants $35 to swap it.
Actually I just figured it out.

##8378#>Enter MSL>DDTM to OFF>Hit Reset
GuruJoe likes this.
MEB is offline  
Reply With Quote
The Following User Says Thank You to MEB For This Useful Post:
GuruJoe (February 2nd, 2014)
Old July 19th, 2012, 10:29 PM   #32 (permalink)
New Member
 
Join Date: Jul 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default can't install CDMA Workshop without error

So i'm trying to flash the Sprint Galaxy S2 over to Boost, but i can't even install CDMA workshop to begin trying. I've read tons of posts and have seen lots of videos regarding how to do this, but clearly the first step is to download CDMA workshop. I can find links to it just fine, but i get an error message about not having the necessary permissions. I read that it's probably due to my antivirus software, and should turn it off temporarily. I have SOPHOS and i cannot uninstall it, unless i'm part of some Admin software team. i've tried downloading onto phone and then moving it over to computer using USB cable, but no luck. Can anyone help me? I'm this close to simply giving up and selling phone.
jolmojr is offline  
Reply With Quote
Old June 1st, 2013, 10:16 AM   #33 (permalink)
Junior Member
 
Join Date: Nov 2012
Posts: 94
 
Device(s):
Carrier: Not Provided

Thanks: 69
Thanked 12 Times in 11 Posts
Default Bad PRL 4 Me

Quote:
Originally Posted by wetbiker7 View Post
Just flashed the new PRL about 30 minutes ago and I'm at full signal. Hope it stays that way. Thx again bro!
when i flash ctmod 3.8 (SPRINT),
i had 21094 everything was good,
then been an idiot tried to update, got 21096 and start roaming all the time

Updated to 12123 corporate , battery start draining like crazy

need to roll back to 21094

Update:
Found 12124, any1 tried????
pyccki is offline  
Last edited by pyccki; June 1st, 2013 at 10:20 AM.
Reply With Quote
Old June 1st, 2013, 05:41 PM   #34 (permalink)
AF Contributor
 
wetbiker7's Avatar
 
Join Date: Jun 2011
Location: Southern California
Gender: Male
Posts: 6,666
 
Device(s): SamsungGalaxy S3, LG Marquee, Asus TF300T 32GB w/ dock, SamsungGalaxy Prevail
Carrier: Boost

Thanks: 1,671
Thanked 2,703 Times in 1,824 Posts
Default

Quote:
Originally Posted by pyccki View Post
when i flash ctmod 3.8 (SPRINT),
i had 21094 everything was good,
then been an idiot tried to update, got 21096 and start roaming all the time

Updated to 12123 corporate , battery start draining like crazy

need to roll back to 21094

Update:
Found 12124, any1 tried????

Yup, I tried it a little while back and it worked well for me.

EDIT: I just went ahead and flashed 12124 again and it took a minute but I got full signal with it.
pyccki likes this.
wetbiker7 is online now  
Last edited by wetbiker7; June 1st, 2013 at 05:59 PM.
Reply With Quote
Old June 2nd, 2013, 09:06 AM   #35 (permalink)
Junior Member
 
Join Date: Nov 2012
Posts: 94
 
Device(s):
Carrier: Not Provided

Thanks: 69
Thanked 12 Times in 11 Posts
Default

Quote:
Originally Posted by wetbiker7 View Post
Yup, I tried it a little while back and it worked well for me.

EDIT: I just went ahead and flashed 12124 again and it took a minute but I got full signal with it.
I'm using 12124 for a day, looks good here also !!
wetbiker7 likes this.
pyccki is offline  
Reply With Quote
Old June 9th, 2013, 07:09 AM   #36 (permalink)
New Member
 
Join Date: Jun 2013
Gender: Female
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Surprised

hey you guys, I have done all the steps to get my lg marquee to be read on cdma nv items reader but the issue I am having now is that document 466 and 1192 have access denied so I was wondering since I am a novice flasher to htc what is the solution to this .

thank you to anyone that can help in advance
TeeJay92 is offline  
Reply With Quote
Old February 2nd, 2014, 11:44 PM   #37 (permalink)
New Member
 
Join Date: Sep 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 1
Thanked 0 Times in 0 Posts
Default

Thank You! Worked Perfect!!!!!!!!!!!! Went from no 3g to 3G
GuruJoe is offline  
Reply With Quote
Reply


Go Back   Android Forums > Android Phones > LG Marquee > Marquee - All Things Root
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 10:14 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.