you just need to wait for bloodawn to fix the 3g issue
Quote:
Originally Posted by ndno
As Monster stated, if you wait for Blood to get the 3G to work on his ZVC Boost ROM w/ his kernel, you can just flash his ROM without having to flash to ZVC first and then flash his kernel.
Oh cool. So it didn't mater I used the Sprint update instead of BOOST? And I can just use Bloodawn's ROM when it's ready.
Real quick, so this is a ROM.. So I can just flash it if I did |Monster|'s 'ZVC LINK' Update and then Flashed his MBv1.2zvc, since it had errors I am now on MBv1.2. I think that is what ndno and |Monster| were saying?
Real quick, so this is a ROM.. So I can just flash it if I did |Monster|'s 'ZVC LINK' Update and then Flashed his MBv1.2zvc, since it had errors I am now on MBv1.2. I think that is what ndno and |Monster| were saying?
do a factory reset first. I havent tested it yet. 1 min left on dl
__________________
Like what u see? Hit "Thanks"
------------------ Donations Appreciated!PAYPAL GitHub
do a factory reset first. I havent tested it yet. 1 min left on dl
Ok.. I mean I will wait until it's finished most likely.. I was just wondering because Blood had said 0.2 is for ZVC/ZV4 ROMS Only, and I currently am not running a ZVC ROM (MB is not a ZVC ROM). Unless he created a ROM with the new kernel implemented into it? Sorry for not understanding everything fully..
Quote:
Originally Posted by Bloodawn
0.2 is only for ZVC/ZV4 roms
0.1 is only for ZV9/ZV3 roms
if you have one of the new basebands with a old rom and you flash 0.2 you'll get stuck on the lg screen.
I had 0.1 working fine. Just wiped cache and installed it. (I have zv4 version of MB 1.2 rom).
However I installed 0.2 (haven't tried the updated version of 0.2 yet) and just got stuck at the LG screen. I'd rather not have to downgrade or restore a stock rom since that would mean wiping out my apps again. If 0.2 doesn't work I may just wait till v1.0 comes out.
I was just wondering if the Hyper kernel .1 could have any affect on the Battery Status? Not sure if you read my Thread: LG Marquee Oddities.. Just was wondering about it is all. Thanks in Advanced.
Last edited by Bionic Chronic; April 17th, 2012 at 04:41 PM.
I had 0.1 working fine. Just wiped cache and installed it. (I have zv4 version of MB 1.2 rom).
However I installed 0.2 (haven't tried the updated version of 0.2 yet) and just got stuck at the LG screen. I'd rather not have to downgrade or restore a stock rom since that would mean wiping out my apps again. If 0.2 doesn't work I may just wait till v1.0 comes out.
the first post as well as multiple others posts explain why 0.2 won't work for you.
MB isn't a ZV4 rom or a ZVC rom, the build.prop is just edited to think it is.
Device(s): Samsung Galaxy Prevail CTMod 3.5, KK2.4, SSM, OC'ed to 900Mhz with J6Remy's GreenME Theme
Carrier: Not Provided
Thanks: 139
Thanked 9 Times in 9 Posts
Quote:
Originally Posted by TookRDerbs
Great work blood! I've been waiting on seeing you in the marquee forums man. The kernal is running great no problems here but I do have a suggestion for ya. Is there anyway you can create a ctmod rom for the marquee because I loved it when I had the prevail and it would be awesome on this device. Thanks again man on your hard work keep it up!
Holy shit, I had to work so late I couldn't check in to see what was going on and I miss awesome test roms and new kernel version!! Aghh! Nice work Bloodawn, cant wait to see whats in store for us.
I was kinda bummed on my marquee for a while, but having such a great community working/testing things for this phone, Im stoked. Nice work guys.
in phone status: mobile network state says connecting. is it an apn issue?
the apn file for the regular boost ZV3 is the same as what sprint uses. and this is a sprint rom but 3g doesn't work for them too so I don't know wtf is causing it.
Wheyn I hhad issues on stock with 3g I would go to setting about phone system updates nd update profile which enabled my 3g evertyime but on this rom pressin that has no response either
I couldn't get the first kernel to work on ZV9, so I tried to do the ZVC upgrade. Only the baseband updated though. I read that the Undeniable ROM is ZV9, and Marky Beats is made to only think the phone is ZVC. What ROM would i use to get the Hyper 0.2 kernel to work. Or should I just wait on the ROMS that Bloodawn is working on? Thanks for any advice. http://img18.imageshack.us/img18/9492/20120417203516.jpg
Bloodawn,
I've been playing around with my sprint phone and was able to duplicate no 3g while installing hyper2.zip. I did have 3g working with your kernel hyper0.2 with the ZVC update that I installed which was made by asadullah.
I just flashed my phone to virgin using this method(KDZ) I then rebooted the phone and saw things were working (everything) I then did a factory reset and made a backup of the ZV9. I then installed sprintupdate (ZVC) modded by asadullah found here. I then rebooted the phone and the update worked. I then installed your kernel Hyper0.2.zip and everything worked fine= 3G
Now I went back to see if my backup would work of the ZV9. I installed that and then installed ZVC update and your kernel in that order without rebooting the device and I had no 3g.
I went back and installed ZV9 and ZVC update w/o rebooting and allowed the phone to boot and I had 3g and then went back to install Hyper0.2 and I have 3g
Maybe this will help you track down the problem........
edit,
I tried the above again with the same results, install a virgin rom, zvc update and hyper kernel w/o rebooting after zvc update wont allow 3g to work, but a virgin rom, zvc update, a bootup and then install hyper0.2 3g works.
Last edited by mp3jeep; April 18th, 2012 at 12:22 PM.
The Following User Says Thank You to mp3jeep For This Useful Post:
Bloodawn,
I've been playing around with my sprint phone and was able to duplicate no 3g while installing hyper2.zip. I did have 3g working with your kernel hyper0.2 with the ZVC update that I installed which was made by asadullah.
I just flashed my phone to virgin using this method(KDZ) I then rebooted the phone and saw things were working (everything) I then did a factory reset and made a backup of the ZV9. I then installed sprintupdate (ZVC) modded by asadullah found here. I then rebooted the phone and the update worked. I then installed your kernel Hyper0.2.zip and everything worked fine= 3G
Now I went back to see if my backup would work of the ZV9. I installed that and then installed ZVC update and your kernel in that order without rebooting the device and I had no 3g.
I went back and installed ZV9 and ZVC update w/o rebooting and allowed the phone to boot and I had 3g and then went back to install Hyper0.2 and I have 3g
Maybe this will help you track down the problem........
edit,
I tried the above again with the same results, install a virgin rom, zvc update and hyper kernel w/o rebooting after zvc update wont allow 3g to work, but a virgin rom, zvc update, a bootup and then install hyper0.2 3g works.
I can also confirm 3G still works after installing the new rom + the hyper 0.2 ontop of that. I didn't even do a factory reset and it still works. (so I still have most of my apps. Will need to uninstall a few left overs from MB rom, but otherwise functions well. )
Getting mount errors in CWM for /cache directory. This happened with asadullah's ZVC/root update. Used to be able to fix it with fix permissions, not fixing the errors this time. No biggie, but thought I'd mention it.
The Following User Says Thank You to sik00 For This Useful Post:
Getting mount errors in CWM for /cache directory. This happened with asadullah's ZVC/root update. Used to be able to fix it with fix permissions, not fixing the errors this time. No biggie, but thought I'd mention it.
158Likes
