April 13th, 2012, 04:10 PM
Thread Author (OP)
Join Date: Aug 2010
Carrier: Not Provided
Thanked 174 Times in 67 Posts
How To Fix Motorola Droid Bionic Screen
This written repair guide will show you in taking apart your Motorola Droid Bionic XT865 / XT875 as well as replacing damaged or broken parts on your phone.
This guide will help you install the following Motorola Droid Bionic part (s):
- Motorola Droid Bionic XT865 Touch Screen Digitizer Replacement
- Motorola Droid Bionic XT865 LCD Screen Replacement
- Motorola Droid Bionic XT875 LCD Screen Replacement
- Safe Open Pry Tool
- Torx T5 Screwdriver
- Adhesive Strips
- Heat Gun/Hair Dryer
Motorola Droid Bionic take apart repair guide:
- First step is to release the back battery cover to have access to the back of the device. Remove the battery, the sim card, and the memory card.
- Next, peel back the battery adhesive tag. Leave it connected, however make sure no adhesive is attached to the motherboard.
- Using T5 Torx Screwdriver, remove the eleven (11) screws around the perimeter of the back housing.
- Using safe pry tool, cautiously pry along the edges of the back housing. Release the clips and remove the back housing.
- Disconnect the three (3) pop flex cables located on the left side of the motherboard.
- At the top sim board, remove the two (2) T5 Torx screws. Cautiously remove together with a black plastic backing.
- Disconnect the final connection for the front camera.
- Next, remove cautiously the motherboard from the screen assembly.
- Release the two (2) touchscreen flex cables from the LCD screen. Be careful as they are very fragile and held in place with adhesive.
- Remove the LCD screen from the touchscreen with front housing using a safe pry tool.
- Remove the ear speaker flex cable from the front housing.
- Heat the front edges of the screen to soften the held adhesive using hair dryer or hair gun to remove the touchscreen digitizer from the front housing. Use quick movements for about 45 seconds.
- Carefully separate the glass from the front housing using a safe pry tool.
- Be cautious of the touch screen flex cables, as they are slotted through the front housing.
- You can now change the touchscreen digitizer or any internal parts on your Droid Bionic.
Simply replace the damaged parts with the new ones and reverse the order to put your phone back together again.