Go Back   Android Forums > Android Phones > Orange San Francisco 2 (ZTE Blade 2)

New Android Wear, House and Home & Automotive forums!
Please report any threads you come across that should be moved to these new sections!

test: Reply
 
LinkBack Thread Tools
Old January 1st, 2012, 09:59 AM   #1 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default How To Hard Reset?

Hi all. I'm new to the forums but I'm having trouble with my Orange San Francisco 2 (ZTE Crescent / Blade2).

My problem is that I'm stuck on the "Too Many Pattern Attempts!" screen.

I've tried most solutions and I can't figure out how to do this, so if anyone could tell me how to hard reset my phone, that'd be great. I've already tried booting it into FTM mode but I can't do anything there.

Thanks in advance,
Plymboy

Plymboy is offline  
Reply With Quote
sponsored links
Old January 1st, 2012, 02:20 PM   #2 (permalink)
Member
 
fr0d0's Avatar
 
Join Date: Aug 2011
Location: Wales UK
Posts: 101
 
Device(s): ZTE Blade OSFI + Crescent TMV
Carrier: Not Provided

Thanks: 8
Thanked 21 Times in 20 Posts
Default

Some workarounds to try before that:
1. try entering null as password. (together with your google username) 2. try entering your username without @gmail.com
3. Combine 1 and 2
4. Call yourself from another phone, answer, without hanging up press the home button, then menu button, settings, try to disable pattern-lock
5. Call yourself from another phone, answer, hang-up, directly after hanging up start pressing your buttons like a madman for <30-60 seconds ending with your home button (might take a while to get the timing right). Go into settings and disable pattern-lock.
6. Try the normal recover password routine from GMail.com and start over from 1.
fr0d0 is offline  
Reply With Quote
The Following User Says Thank You to fr0d0 For This Useful Post:
Plymboy (January 1st, 2012)
Old January 1st, 2012, 02:41 PM   #3 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Thanks but I've already tried these steps before and they won't work.
Plymboy is offline  
Reply With Quote
Old January 1st, 2012, 04:09 PM   #4 (permalink)
Member
 
fr0d0's Avatar
 
Join Date: Aug 2011
Location: Wales UK
Posts: 101
 
Device(s): ZTE Blade OSFI + Crescent TMV
Carrier: Not Provided

Thanks: 8
Thanked 21 Times in 20 Posts
Default

IT DOES NOT USE the current gmail password.
IT WANTS the ORIGINAL gmail password -- i.e. the one that you used when you went through the initial phone setup procedure.

If ADB is enabled on the phone, then you don't need to reset.
Connect USB to your computer, "adb shell",
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit

You could also re-flash the rom if you want to try in the Crescent area over on Modaco

Wow there are some long discussions on it : http://code.google.com/p/android/issues/detail?id=3006
fr0d0 is offline  
Last edited by fr0d0; January 1st, 2012 at 04:37 PM.
Reply With Quote
The Following User Says Thank You to fr0d0 For This Useful Post:
Plymboy (January 2nd, 2012)
Old January 1st, 2012, 05:30 PM   #5 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

One time mine asked for my username and password. But earlier in the day Google told me much of the UK was on gmail instead of googlemail and did I want to change it. I selected yes and then later in the day (totally unconnected with the session where they asked me did I want to change to gmail) I got to this wanting the user name and password, think it was after switching ROMS. No matter which I tried it failed, be it blink@gmail.com or blink@googlemail.com so I`m thinking its the password thats the problem by then. Anyway, I managed to find out it was none of the user names they wanted as above. It was the original user name (email addy) I used to sign up for the gmail (read googlemail) account. So flipflop@floppetyflop.co.uk or something not to dissimilar. Hope that isn`t someones real addy. Bingo, I was in!

When you go to your Google Account its that user name there they seem to want. Don`t know if its the same in your situation but that`s how I found it. Only Google could make life this complicated, second only to Microdaft.

Steve
Reider is offline  
Last edited by Reider; January 1st, 2012 at 05:35 PM.
Reply With Quote
The Following 2 Users Say Thank You to Reider For This Useful Post:
momist (January 2nd, 2012), Plymboy (January 2nd, 2012)
Old January 2nd, 2012, 05:04 AM   #6 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Reider View Post
One time mine asked for my username and password. But earlier in the day Google told me much of the UK was on gmail instead of googlemail and did I want to change it. I selected yes and then later in the day (totally unconnected with the session where they asked me did I want to change to gmail) I got to this wanting the user name and password, think it was after switching ROMS. No matter which I tried it failed, be it blink@gmail.com or blink@googlemail.com so I`m thinking its the password thats the problem by then. Anyway, I managed to find out it was none of the user names they wanted as above. It was the original user name (email addy) I used to sign up for the gmail (read googlemail) account. So flipflop@floppetyflop.co.uk or something not to dissimilar. Hope that isn`t someones real addy. Bingo, I was in!

When you go to your Google Account its that user name there they seem to want. Don`t know if its the same in your situation but that`s how I found it. Only Google could make life this complicated, second only to Microdaft.

Steve
Thanks for that but on my gmail, I've never had any other email associated with it.
Plymboy is offline  
Reply With Quote
Old January 2nd, 2012, 05:06 AM   #7 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by fr0d0 View Post
IT DOES NOT USE the current gmail password.
IT WANTS the ORIGINAL gmail password -- i.e. the one that you used when you went through the initial phone setup procedure.

If ADB is enabled on the phone, then you don't need to reset.
Connect USB to your computer, "adb shell",
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit

You could also re-flash the rom if you want to try in the Crescent area over on Modaco

Wow there are some long discussions on it : Issue 3006 - android - Google credentials don't unlock phone after failing too many pattern attempts - Android - An Open Handset Alliance Project - Google Project Hosting
I don't know too much about android so sorry if this is a stupid question. Does flashing the ROM void any warranty or involve rooting?
Plymboy is offline  
Reply With Quote
Old January 2nd, 2012, 05:41 AM   #8 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

Quote:
Originally Posted by Plymboy View Post
I don't know too much about android so sorry if this is a stupid question. Does flashing the ROM void any warranty or involve rooting?
Yes it does..... I did mine a few times and only got it 23rd of December. Its working perfectly for me.

Steve
Reider is offline  
Reply With Quote
The Following User Says Thank You to Reider For This Useful Post:
Plymboy (January 2nd, 2012)
Old January 2nd, 2012, 06:50 AM   #9 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Reider View Post
Yes it does..... I did mine a few times and only got it 23rd of December. Its working perfectly for me.

Steve
Ok, I'll install a new ROM and hopefully it'll work. Also, as I couldn't find it anywhere else, could someone tell me how to factory reset it? Just in case someone needs to factory reset in the future.
Plymboy is offline  
Reply With Quote
Old January 2nd, 2012, 07:05 AM   #10 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

Quote:
Originally Posted by Plymboy View Post
Ok, I'll install a new ROM and hopefully it'll work. Also, as I couldn't find it anywhere else, could someone tell me how to factory reset it? Just in case someone needs to factory reset in the future.
As Frodo suggests you may be better going to the Crescent section in the Modoco Forum. You`ll be able to join the Darkside and hopefully sort it then

You basically need to install the Clockwork Mod so that you can get into the CWM Restore screen. In there you use the up/down Volume buttons to move through the selections and the last selection is Advanced, that moves you to the second page with the HOME key being used to select. The back key takes you back to the first page. Wipe Data/Factory Reset and other options are in there. If installing a new ROM it needs to be on the SD card ready. If its the Crescent.zip (use for Vivacity or SFII) then you need the Vivacitykernel.zip (use it to make sure all keys are aligned, for SFII users theirs also a SFIIkernel.zip file) on the SD card too. You need to Flash both one after each other before choosing the option to restart the system (phone restart). This takes up to about 10 mins to restart the phone as all the changes are applied. Its advisable, if you proceed, to wipe the Cache and the Dalvik Cache as well as the Data/Factory Reset. Then you have a better chance of a fresh start.

This does not unlock the phone, that`s a separate routine and needs to be done before applying this ROM change, if that`s what you intend to do. Basically it`s apply the drivers with the USB lead disconnected, install QPST on the PC, turn on USB Debugging on the phone, press and hold the VOL down button on the phone and start it-release the button when you see FTM on the screen. Reconnect the USB lead then open the correct USB Port in QPST Configuration. Once done and showing the phone is connected close QPST and open Software Download. Save a QCN Backup file, unzip the correct unlock folder (Vivacity or SFII) and run download. Press START then sit and wait. Restore the QCN Backup. Remove the battery and USB Cable then insert your Sim card of choice, sorted! Full instructions are there, this is the condensed version to give you an idea.

Steve
Reider is offline  
Last edited by Reider; January 2nd, 2012 at 07:28 AM.
Reply With Quote
The Following User Says Thank You to Reider For This Useful Post:
Plymboy (January 2nd, 2012)
sponsored links
Old January 2nd, 2012, 07:32 AM   #11 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Reider View Post
As Frodo suggests you may be better going to the Crescent section in the Modoco Forum. You`ll be able to join the Darkside and hopefully sort it then

You basically need to install the Clockwork Mod so that you can get into the CWM Restore screen. In there you use the up/down Volume buttons to move through the selections and the last selection is Advanced, that moves you to the second page with the HOME key being used to select. The back key takes you back to the first page. Wipe Data/Factory Reset and other options are in there. If installing a new ROM it needs to be on the SD card ready. If its the Crescent.zip (use for Vivacity or SFII) then you need the Vivacitykernel.zip (use it to make sure all keys are aligned, for SFII users theirs also a SFIIkernel.zip file) on the SD card too. You need to Flash both one after each other before choosing the option to restart the system (phone restart). This takes up to about 10 mins to restart the phone as all the changes are applied. Its advisable, if you proceed, to wipe the Cache and the Dalvik Cache as well as the Data/Factory Reset. Then you have a better chance of a fresh start.

This does not unlock the phone, that`s a separate routine and needs to be done before applying this ROM change, if that`s what you intend to do. Basically it`s apply the drivers with the USB lead disconnected, install QPST on the PC, turn on USB Debugging on the phone, press and hold the VOL down button on the phone and start it-release the button when you see FTM on the screen. Reconnect the USB lead then open the correct USB Port in QPST Configuration. Once done and showing the phone is connected close QPST and open Software Download. Save a QCN Backup file, unzip the correct unlock folder (Vivacity or SFII) and run download. Press START then sit and wait. Restore the QCN Backup. Remove the battery and USB Cable then insert your Sim card of choice, sorted! Full instructions are there, this is the condensed version to give you an idea.

Steve
I've been searching their forums (as well as google) to try and find out how I can root my phone. Could anyone shed some light on this as I'm stumped.
Plymboy is offline  
Reply With Quote
Old January 2nd, 2012, 08:02 AM   #12 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

Read it very carefully;

[HOW TO] Rooting Unlocking and De-Branding your ZTE Crescent [Updated Now Complete] - Android @ MoDaCo

If you decide to proceed then do it logically. Read and read some more of that post on page 1. If you decide to proceed then get the correct files together and use them in the order they are described. Check and double check you have all the files and the correct ones for your model before you start. Take your time and think about what you`re doing, ensure the phone is 100% charged before you start. Then you will have a better chance of success.

I unlocked my SFII and then rebooted it from the Restore menu (see link to post above for definition of Restore). In hindsight, I should have unlocked it, restarted to the Restore screen, wiped the data/factory, Cache and Dalvik Cache (Dalvik is on second page of Restore so use Advanced to get to it). Then applied the Crescent.zip as a flash from Restore, followed by the Sanfranciscokernel.zip (align the keyboard with that) then rebooted the system. Both zips are flashed by moving the up/down vol button to move through the menu then press HOME to select the apply zip from SD option Ten mins later I would have had an unlocked and debranded phone. But I hadn`t the confidence to take that last step and didn`t have those two files on my SD card. Now I have done it many times but because I simply restarted the phone I initially had great problems trying to get back to the Restore screen to apply the ROM change.

Steve
Reider is offline  
Last edited by Reider; January 2nd, 2012 at 08:15 AM.
Reply With Quote
The Following 2 Users Say Thank You to Reider For This Useful Post:
momist (January 2nd, 2012), Plymboy (January 2nd, 2012)
Old January 2nd, 2012, 08:11 AM   #13 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Reider View Post
Read it very carefully;

[HOW TO] Rooting Unlocking and De-Branding your ZTE Crescent [Updated Now Complete] - Android @ MoDaCo

If you decide to proceed then do it logically. Read and read some more of that post on page 1. If you decide to proceed then get the correct files together and use them in the order they are described. Check and double check you have all the files and the correct ones for your model before you start. Take your time and think about what you`re doing, ensure the phone is 100% charged before you start. Then you will have a better chance of success.

Steve
By the looks of it, it seems you can only do it if you have USB Debugging or ADB turned on. Which I don't.
Could you tell me how to factory reset, please? I think it would be easier.
Plymboy is offline  
Reply With Quote
Old January 2nd, 2012, 08:19 AM   #14 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

Quote:
Originally Posted by Plymboy View Post
By the looks of it, it seems you can only do it if you have USB Debugging or ADB turned on. Which I don't.
Could you tell me how to factory reset, please? I think it would be easier.
You still need a ROM after the factory reset I think, so that page is better to work from. Their is a new file in that site and Crescent section that has the Restore built into the phone permanently so you don`t need the ADB. You need to get into Restore to use the factory reset. Debugging is simple to turn on. Open the phone settings, open appllications, open development and set USB Debugging turned on.

Steve
Reider is offline  
Last edited by Reider; January 2nd, 2012 at 08:21 AM.
Reply With Quote
The Following User Says Thank You to Reider For This Useful Post:
Plymboy (January 2nd, 2012)
Old January 2nd, 2012, 08:26 AM   #15 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Reider View Post
You still need a ROM after the factory reset I think, so that page is better to work from. Their is a new file in that site and Crescent section that has the Restore built into the phone permanently so you don`t need the ADB. You need to get into Restore to use the factory reset. Debugging is simple to turn on. Open the phone settings, open appllications, open development and set USB Debugging turned on.

Steve
I can't get into the settings as my phone is locked up on "Too Many Pattern Attempts!" screen. Any help?
Plymboy is offline  
Reply With Quote
Old January 2nd, 2012, 11:12 AM   #16 (permalink)
New Member
Thread Author (OP)
 
Join Date: Jan 2012
Location: England, Great Britain
Posts: 10
 
Device(s): Orange San Francisco 2 (ZTE Crescent / Blade2 / T Mobile Vivacity)
Carrier: Not Provided

Thanks: 11
Thanked 0 Times in 0 Posts
Default

Can someone please tell me how I can factory reset my phone without rooting or anything as I don't have USB debugging on nor can I turn it on without access to the home screen and settings.
Plymboy is offline  
Reply With Quote
Old January 2nd, 2012, 11:16 AM   #17 (permalink)
Member
 
fr0d0's Avatar
 
Join Date: Aug 2011
Location: Wales UK
Posts: 101
 
Device(s): ZTE Blade OSFI + Crescent TMV
Carrier: Not Provided

Thanks: 8
Thanked 21 Times in 20 Posts
Default

Resetting still won't get rid of the pattern lock - if anyone knew how do do it anyway! Read all the stories linked to see. A Facory Reset is only available from the phone menu option. The only way without replacing the rom are the manual methods... hit the menu button a thousand times as the phone boots up etc..

You don't need to get into the phone to root it. Step one = hold down vol + and power on WITHOUT the USB lead connected and your phone will display "FTM". Then you connect USB, run the QPST app on your PC > backup the phone > write the unlock file to the phone > boot into Clockwork and install the 2 zips. Done!

Easy huh?
fr0d0 is offline  
Last edited by fr0d0; January 2nd, 2012 at 11:21 AM.
Reply With Quote
The Following User Says Thank You to fr0d0 For This Useful Post:
Plymboy (January 2nd, 2012)
Old January 2nd, 2012, 11:20 AM   #18 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

Quote:
Originally Posted by Plymboy View Post
I can't get into the settings as my phone is locked up on "Too Many Pattern Attempts!" screen. Any help?
I had a good scout around, reading through many sites and pages. The ZTE phones appear to have various ways of hard setting the factory reset without the menu. Some are a little white button behind the battery, others are a key combination like Vol UP and Power. I tried some but got nowhere, I do however believe one exists, but do not know what it is.

I suggest therefore that you approach Google, since it is a problem at their end. I doubt you will get anywhere fast with that approach. The other way is to either contact Orange or whoever you purchased from and get it repaired. ZTE is another option and this has reportedly been done by one person but not verified. Final option is one of those shops or market stalls we all know and love that reset/unlock phones. Tell them the problem first, ask them if they can reset or fix it, ask how much before you let them do it.

Once you get it repaired/swapped I personally would say sod the guarantee and get it patched so the Restore is always on. Had that been there now it would have saved you. I dare say even now someone could Telnet/FTP in or something and make the changes. But its finding that person. I fear, especially as its a new released phone recently, your quickest route is to get it repaired/swapped. Good luck and let us know how you get on,

EDIT: Theirs no harm in trying Frodos approach in the post above but I doubt it will work. Since as you say you cannot get in to turn on USB debugging. Maybe you`ll get lucky and its on, give it a try anyway.

Steve
Reider is offline  
Last edited by Reider; January 2nd, 2012 at 11:30 AM.
Reply With Quote
The Following User Says Thank You to Reider For This Useful Post:
fr0d0 (January 2nd, 2012)
Old January 2nd, 2012, 11:30 AM   #19 (permalink)
Member
 
fr0d0's Avatar
 
Join Date: Aug 2011
Location: Wales UK
Posts: 101
 
Device(s): ZTE Blade OSFI + Crescent TMV
Carrier: Not Provided

Thanks: 8
Thanked 21 Times in 20 Posts
Default

Quote:
Originally Posted by Plymboy View Post
I don't know too much about android so sorry if this is a stupid question. Does flashing the ROM void any warranty or involve rooting?
It involves rooting only if you want it to. You can install an untouched setup to make your phone like new - a factory reset if you will*. Only thing you need is the mac address of your phone wifi. If you've already connected it to the web perhaps you have that information on your home router?? The backup procedure in the tutorial is the essential step to get this info from the phone first. (all possible without having to turn on your phone or unlock it).

*If your phone gets sent back to the factory that's all they will do.

Don't worry if you can't get it. You can always randomly generate another. Mac addresses are supposed to be unique but you'd have a better chance of winning the lottery jackpot twice in a row than finding a mac conflict with another phone.

Strictly rooting voids the warrany I think, but most people get replacement phones anyway. Some people will flash the phone with a stock rom so that the supplier can't tell.
fr0d0 is offline  
Last edited by fr0d0; January 2nd, 2012 at 11:39 AM.
Reply With Quote
The Following User Says Thank You to fr0d0 For This Useful Post:
Plymboy (January 2nd, 2012)
Old January 2nd, 2012, 11:33 AM   #20 (permalink)
Member
 
fr0d0's Avatar
 
Join Date: Aug 2011
Location: Wales UK
Posts: 101
 
Device(s): ZTE Blade OSFI + Crescent TMV
Carrier: Not Provided

Thanks: 8
Thanked 21 Times in 20 Posts
Default

Quote:
Originally Posted by Reider View Post
EDIT: Theirs no harm in trying Frodos approach in the post above but I doubt it will work. Since as you say you cannot get in to turn on USB debugging. Maybe you`ll get lucky and its on, give it a try anyway.
Why does he need USB debugging turned on?? FTM mode doesn't require the phone to boot.

The only reason that is turned on is to move files around with the phone running. You can put the phone in USB mode from clockwork... the O/S isn't needed.
fr0d0 is offline  
Last edited by fr0d0; January 2nd, 2012 at 11:44 AM.
Reply With Quote
The Following User Says Thank You to fr0d0 For This Useful Post:
Plymboy (January 2nd, 2012)
sponsored links
Old January 2nd, 2012, 11:43 AM   #21 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

In Bouncers post he says;

Quote:
Download THIS file and install it.
Download the unlock.zip for your SFII or Vivacity. (WARNING: Using the WRONG unlock.zip will brick your phone completely)
Connect your phone to your computer and make sure you have USB Debugging turned on. (Settings > Applications > Development > USB Debugging)
Press and hold the Volume Down and power buttons together. This SHOULD bring you to a screen saying FTM. If your see Clockwork Mod you will have to load the stock ROM. (Instructions to Follow)
Make sure you installed QPST in the first step. Now in the Start menu find "QPST Configuration" Click on "Ports" and then the "Add Port" button.
Once that is added close Configuration and open "Software Download" from the start menu
Click "Backup" on the utility and choose where to save the "QCN" File
Make sure the file exists and is non-zero in file size before precedding - If not try the from step 6 again.
Unzip your Unlock.zip folder and run "download.exe"
If you are sure you want to Unlock your phone press "START!"
Sit and wait it out, Should take no more than two minutes until it is finished and Unlocked!
Go back to the "Software Download" utility and click the "Restore" Find the .qcn file you saved and restore it.
If it will not restore tick "Allow Phone/FILE ESN mismatch"
Remove your USB cable, pull the battery and insert your SIM of choice. Voila.
Your phone SHOULD boot into Clockwork Mod Recovery. If not follow the instuctions below.
If your phone is in Clockwork Mod follow instruction set 3.
I didn`t realise FTM worked without it. If it does then great, looking at that list it made it sound like not.

Steve
Reider is offline  
Reply With Quote
The Following User Says Thank You to Reider For This Useful Post:
Plymboy (January 2nd, 2012)
Old January 2nd, 2012, 11:47 AM   #22 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

Plymboy: or anyone else who has the San Francisco II can you go to this link and tell me if the phone shows as compatible with Modern Combat 3 please?

https://market.android.com/details?id=com.gameloft.android.ANMP.GloftM3HM&fea ture=related_apps#?t=W251bGwsMSwyLDEwOSwiY29tLmdhb WVsb2Z0LmFuZHJvaWQuQU5NUC5HbG9mdE0zSE0iXQ..

I need to know before I swap ROMS again since the one I`m on doesn`t show as the Crescent. I`m pretty sure it said it was compatible before I changed ROMS. Its only on offer for 24 hours too. Mine now shows as an 02 ZTE Blade 2 where before it was the Crescent.

Steve
Reider is offline  
Reply With Quote
Old January 2nd, 2012, 11:52 AM   #23 (permalink)
Member
 
fr0d0's Avatar
 
Join Date: Aug 2011
Location: Wales UK
Posts: 101
 
Device(s): ZTE Blade OSFI + Crescent TMV
Carrier: Not Provided

Thanks: 8
Thanked 21 Times in 20 Posts
Default

You're just teasing Plymboy aren't you? :P

I don't see any reason that debugging needs to be on. It's a setting in the O/S that won't be running when you do the flashing. Shall have to confirm with bouncer5... Or perhaps Plymboy can confirm?
fr0d0 is offline  
Reply With Quote
Old January 2nd, 2012, 12:00 PM   #24 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

All he has to do is try it, surprised he hasn`t yet. Unless he has and not said anything specific about it. Right, this is the second day I had a virtual plane on the ground waiting to go. Best set it back to morning again. Then fly from Liverpool across the Mersey and the Dee to Snowdon, through the valleys to Caernarfon. Love that route n got a new weather program I want to check out in that area. Be back later, hope someone checks that game compatibility.

Steve
Reider is offline  
Reply With Quote
Old January 2nd, 2012, 12:03 PM   #25 (permalink)
Member
 
fr0d0's Avatar
 
Join Date: Aug 2011
Location: Wales UK
Posts: 101
 
Device(s): ZTE Blade OSFI + Crescent TMV
Carrier: Not Provided

Thanks: 8
Thanked 21 Times in 20 Posts
Default

No I meant you goading him to look at the game spec with his phone when you know he can't get past the security lock! :-D

A flight sim nut huh? You on a forum for that? Had a friend into it a while back. Fascinating stuff!

Plymboy: I'll keep checking back here to see if you need help. Ask on modaco too - there's always someone around ;-)
fr0d0 is offline  
Last edited by fr0d0; January 2nd, 2012 at 12:07 PM.
Reply With Quote
Old January 2nd, 2012, 04:46 PM   #26 (permalink)
Junior Member
 
Reider's Avatar
 
Join Date: Dec 2011
Posts: 48
 
Device(s):
Carrier: Not Provided

Thanks: 11
Thanked 24 Times in 20 Posts
Default

Forgot about that when I placed the message. I take some bad bad stuff for severe pain from a failed spine op and short term memory is affected. Something from 5 mins ago can be gone very quickly and all has to be written down. The pills affect the brain to kill pain signals but affect memory and thought control too. To be honest when I reply to something I have to check what the words are called again cos I`ve forgotten allready. Just have to make the most of it.

I`ve been flight simming about 20 years or more. Started on my Opus 486 DX2/66 which I made into a DX4/100 and the MS flight sim stuff was crap. I recall the chip cos I still have the DX2/66 in my collection upstairs with loads of other stuff. Nowadays real light plane and jet pilots come to our forums and they say they prefer training on FSX because its more realistic than their simulators they train on. GPS, autoland, VFR Scenery, real world weather, real world scenery, we have it all. A lot of the planes are very close to the real thing systems wise too. I live in Warrington so I`m in between Liverpool EGGP, Barton EGCB, Manchester EGCC and theirs another one close to the Dee which I always forget the name of and then another close to the Pennines too. So I try and make those realistic and plenty of VFR software (Visual Flight Rules-fly by sight rather than GPS, though we have those too). Hence I like light planes and following rivers, canals, mountains, motorways to get a fix on destination without resorting to GPS, good fun on my pills. ;-)

Edit: Was hoping Plym would have tried FTM and got the info back here while I was crashing my Cessna 152.....

Steve
Reider is offline  
Last edited by Reider; January 2nd, 2012 at 04:52 PM.
Reply With Quote
The Following User Says Thank You to Reider For This Useful Post:
fr0d0 (January 2nd, 2012)
Old July 3rd, 2012, 06:08 AM   #27 (permalink)
New Member
 
Join Date: Dec 2010
Posts: 3
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

The only thing to do is a factory reset.

take out your sim card.Put battery back in and power on

press emergency call.

type in *983*987# (don't leave any spaces)

that brings up the "erase everything" screen

press "erase everything" then wait

Wait for the orange logo to disappear then your phone is as new again. Simple!

You will lose everything on the phone, but at least you can use your phone again!
Babamobiles is offline  
Reply With Quote
Old July 3rd, 2012, 06:10 AM   #28 (permalink)
New Member
 
Join Date: Dec 2010
Posts: 3
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Plymboy View Post
Hi all. I'm new to the forums but I'm having trouble with my Orange San Francisco 2 (ZTE Crescent / Blade2).

My problem is that I'm stuck on the "Too Many Pattern Attempts!" screen.

I've tried most solutions and I can't figure out how to do this, so if anyone could tell me how to hard reset my phone, that'd be great. I've already tried booting it into FTM mode but I can't do anything there.

Thanks in advance,
Plymboy
The only thing to do is a factory reset.

take out your sim card.Put battery back in and power on

press emergency call.

type in *983*987# (don't leave any spaces)

that brings up the "erase everything" screen

press "erase everything" then wait

Wait for the orange logo to disappear then your phone is as new again. Simple!

You will lose everything on the phone, but at least you can use your phone again!
Babamobiles is offline  
Reply With Quote
Old November 24th, 2013, 12:04 AM   #29 (permalink)
New Member
 
Join Date: Nov 2013
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks a lot Babamobiles for this handy tip. Went into Emergency call and dialed *983*987#. Works like a treat.
bhadoriavivek is offline  
Reply With Quote
Reply
Tags
blade, blade2, crescent, factory, fran, francisco, ftm, hard, orange, reset, settings


Go Back   Android Forums > Android Phones > Orange San Francisco 2 (ZTE Blade 2)
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 07:46 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.