Hi Gang.
Okay so I decided to bite the bullet, and root my Note 3. I'm no stranger to rooting, having successfully rooted both my 1st generation HTC Desire, and my Galaxy S2.
Following Dynomot's easy guide I downloaded everything I need, and started the rooting process. The only issue I had initially was Odin was unable to see my phone. Re installing the USB through Kies sorted this.
Once I started the root process, it failed almost straight away.
The message displayed on my phone can be seen in the attached image.
I mentioned this to a mate at work who recently rooting his S3. He said check that the version of Odin is the last 3.09. The one that I was using, and was downloaded from Dynomot's guide was version 1.85.
So proceeded to try rooting through this later version. Again it failed.
The text box in Odin displayed the below
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm now totally baffled as to how to get this phone rooted. The only good thing is my phone isn't bricked.
Any help would be gratefully appreciated.
Thanks in advance.
Andy
Okay so I decided to bite the bullet, and root my Note 3. I'm no stranger to rooting, having successfully rooted both my 1st generation HTC Desire, and my Galaxy S2.
Following Dynomot's easy guide I downloaded everything I need, and started the rooting process. The only issue I had initially was Odin was unable to see my phone. Re installing the USB through Kies sorted this.
Once I started the root process, it failed almost straight away.
The message displayed on my phone can be seen in the attached image.
I mentioned this to a mate at work who recently rooting his S3. He said check that the version of Odin is the last 3.09. The one that I was using, and was downloaded from Dynomot's guide was version 1.85.
So proceeded to try rooting through this later version. Again it failed.
The text box in Odin displayed the below
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm now totally baffled as to how to get this phone rooted. The only good thing is my phone isn't bricked.
Any help would be gratefully appreciated.
Thanks in advance.
Andy