Root stock rom for galaxy note i717 question

ndfan4u · May 1, 2012

Hey guys, question on flashing back to stock. I found this on XDA but dont quite understand.

This is an odin .tar prepared with the stock AT&T Kernel, System, and Recovery.

Flash it from odin using the same instructions as my root thread

After flashing, you may need to boot into recovery by powering off, holding vol up + vol down, and holding power until you get into recovery. Then perform a factory reset, this should get you up and running after most brickery.

Note that this is a large file (~450MB), please spare my web host if you don't particularly need it

Download .rar here

Below are stock kernel-only odin tars:
AT&T stock kernel-only odin pda tar
TELUS stock kernel-only odin pda tar
Bell stock kernel-only odin pda tar
Rogers stock kernel-only odin pda tar

what is the difference between .rar and tar stock kernel
I want to return phone to brand new from the store stock rom.

ryandelman · May 2, 2012

ndfan4u said:
Hey guys, question on flashing back to stock. I found this on XDA but dont quite understand.

This is an odin .tar prepared with the stock AT&T Kernel, System, and Recovery.

Flash it from odin using the same instructions as my root thread

After flashing, you may need to boot into recovery by powering off, holding vol up + vol down, and holding power until you get into recovery. Then perform a factory reset, this should get you up and running after most brickery.

Note that this is a large file (~450MB), please spare my web host if you don't particularly need it

Download .rar here

Below are stock kernel-only odin tars:
AT&T stock kernel-only odin pda tar
TELUS stock kernel-only odin pda tar
Bell stock kernel-only odin pda tar
Rogers stock kernel-only odin pda tar

what is the difference between .rar and tar stock kernel
I want to return phone to brand new from the store stock rom.

Two things here:

The .tar above is just the stock kernel itself. Don't try flashing that on its own or you'll soft brick.

The .rar file is the full stock ROM which, once downloaded, will need to be extracted as a .tar (using Bitzipper or any other zip utility).

Then you take this extracted .tar and load it into the PDA field of Odin. Then you flash away (takes a bit over 3min) and you're left with complete stock ROM.

After this, install the CWM recovery through Odin (that .tar file can be found on XDA as well, or I can PM it to you) and then AND ONLY then will you be able to boot into recovery.

Hope this helps somewhat.

-Ryan

chevrev · May 3, 2012

can't download the file?

Rsoaker27 · May 4, 2012

Thanks for the info...I only had a few issues with the ICS..work email trying to sync 24/7 thus killing my battery..which I just unchecked sync..and being connected to wifi drained the battery. My other email (MSN, Yahoo) didnt have the same effect but at random it would take forever to send an email or sometimes it wouldnt send them at all...that being said I switched back to gingerbread and really wish(after reading tons of posts) that I never messed with it in the first place..Im new to android after having an iPhone for the last few years and love the system but now I worry about being able to get OTA updates. Needless to say Ive learned my lesson!

th3goob · May 7, 2012

ryandelman said:
Two things here:

The .tar above is just the stock kernel itself. Don't try flashing that on its own or you'll soft brick.

The .rar file is the full stock ROM which, once downloaded, will need to be extracted as a .tar (using Bitzipper or any other zip utility).

Then you take this extracted .tar and load it into the PDA field of Odin. Then you flash away (takes a bit over 3min) and you're left with complete stock ROM.

After this, install the CWM recovery through Odin (that .tar file can be found on XDA as well, or I can PM it to you) and then AND ONLY then will you be able to boot into recovery.

Hope this helps somewhat.

-Ryan

Okay, i see that you explained it...but do i need to do the extra factory reset by rooting it with CWM?

ryandelman · May 8, 2012

th3goob said:
Okay, i see that you explained it...but do i need to do the extra factory reset by rooting it with CWM?

CWM is kind of an optional step.

In other words, if all you want to do is return to "straight out of the package" stock, then there's no need to install clockwork recovery back on the device (CWM).

However, if you want to flash any custom ROMs in the future, install any zip files of any sort, you'll need CWM installed, which is why I kind of casually threw it into my explanation even though the OP never actually mentioned it.

Hopefully this make sense. If not, let me know.

-Ryan

samirfuzzy · Sep 8, 2012

I cant find the actual attstockrom file anywhere. if any one could please give me a link.

Kyrotech · Sep 10, 2012

samirfuzzy said:
I cant find the actual attstockrom file anywhere. if any one could please give me a link.

SamMobile Firmware Page

you can download here, just signup and its free

infowarz · Oct 31, 2014

Kyrotech said:
SamMobile Firmware Page

you can download here, just signup and its free

Hey thanks,
Downloaded I717UCMD3_I717ATTMD3_ATT.zip (inside zip was KIES_HOME_I717UCMD3_I717ATTMD3_1117019
_REV02_user_low_ship.tar ) from other site. Odin said cant connect 3 times and after it showed connection, installed tar 4 times, and than it went in bootloop 4 times.
SO.... I be softbricked.... big time.

Went to that link, but didn't see any att US rom, like 5 other sites today from other forums.

Does US att show up when we register?

Root stock rom for galaxy note i717 question

Well-Known Member

Well-Known Member

Lurker

Lurker

Well-Known Member

Well-Known Member

Lurker

Member

Member

BEST TECH IN 2023

Smartphones

Best Android Phones

Upcoming

Best iPhones

Upcoming

Tablets

Best Tablets

Upcoming

Laptops

Best Laptops

Upcoming

Televisions

Best TVs

Upcoming

Game Consoles

Best Game Consoles

Upcoming

Wearables

Best Wearables

Upcoming

Smart Home

Smart Home Tech

Upcoming

Similar threads