Go Back   Android Forums > Android Phones > Samsung Galaxy Indulge

test: Reply
LinkBack Thread Tools
Old February 12th, 2013, 03:51 AM   #1 (permalink)
New Member
Thread Author (OP)
Join Date: Feb 2013
Posts: 1
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default Phone won't stop restarting after reassembly

I bought a new digitizer for my phone and tried putting it in today. After reassembling my phone four times i found that the new digitzer wasn't working, so I reassembled my phone with the old one.

But now my phone keeps on showing the black and white SAMSUNG splash for a few seconds, shutting off and then doing it again. Is there some sort of hardware issue at play? I thought it was the ribbon cable going from the digitizer into the motherboard but that seemed like it was connected properly, and all the other cables seemed to be connected properly too. Does anyone have any ideas?

My phone isn't rooted or anything either.


edit: I tried pluggin the phone in, it keeps restarting the battery charging animation when it's plugged in. I also tried putting it on download mode but it shut off and restarted in around the same amount of time as it does when it's showing the battery charge or SAMSUNG splash...

thexinferno is offline  
Last edited by thexinferno; February 12th, 2013 at 04:18 AM.
Reply With Quote
sponsored links
Old February 24th, 2013, 02:30 PM   #2 (permalink)
skrapmetal's Avatar
Join Date: Feb 2012
Location: Texarkana, TX
Posts: 377
Device(s): LG Spirit, LG Esteem (#2), Moto Droid @1.2G, SG Indulge, Huawei Ascend CM7 @729mhz, LG LX5550
Carrier: MetroPOS

Thanks: 98
Thanked 44 Times in 38 Posts
Default Re: Phone won't stop restarting after reassembly

If it wasn't doing it before, it's obviously something that happened during reassembly. The connector pins are TINY, if i were you, i would take it apart once more and go over every single connector with a magnifying glass and check for bent pins, reassemble slowly, double check everything. Look for bent pins, torn ribbon cables, and anything that looks out of the ordinary.
skrapmetal is offline  
Reply With Quote
Old November 2nd, 2013, 08:38 AM   #3 (permalink)
Senior Member
Madbat's Avatar
Join Date: Feb 2012
Location: New Orleans
Gender: Male
Posts: 1,166
Device(s): Galaxy victory w/vaevictus kernal, Nexus 7(2013), Galaxy S3
Carrier: virgin mobile

Thanks: 168
Thanked 316 Times in 226 Posts

I had this too. Turned out the power button was faulty. It was stuck pressed in internally.
Madbat is online now  
Reply With Quote
Old November 23rd, 2013, 07:09 AM   #4 (permalink)
Senior Member
Tokenpoke's Avatar
Join Date: Feb 2011
Location: Miami, FL
Gender: Male
Posts: 3,065
Device(s): sgsIII, pure stock samsung galaxy tab 2 7.0 dualbooting stock and pacrom Lg F6 rooted SgS3 4.3 ro
Carrier: MetroPCS

Thanks: 299
Thanked 1,113 Times in 607 Posts

When doing the job did you make sure you weren't carrying a static charge? I do all my stuff in a wooden chair on a tile floor and discharge static in my person by touching my window frame before picking up my screwdriver.
looking for local miami music? in a miami band and want free promo and show tips, no strings attached? www.facebook.com/hahopromotions show updates, music news and free stuff!!! i help here for free, so i figured i can do this too!!! enjoy!
Tokenpoke is offline  
Reply With Quote

Go Back   Android Forums > Android Phones > Samsung Galaxy Indulge
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 09:18 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.