[WTA] galaxy s2 USB connection to PC

imkelvin91 · November 22nd, 2011, 02:24 AM

i am currently using S2 i9100g. When i connected my s2 to the pc, it failed to find the driver/ install it.
How to solve this problem?
i've tried using :
-Enable usb debugging from Menu > Settings > Applications
-return to home screen
-plug usb cable in
-pull down status bar
-press ‘ connect usb storage’ button

or try this method:

Alternatively, without USB debugging enabled

Go to Settings > Wireless & Network > USB utilities and click the button > then (and ONLY then) plug in USB cable

But it still doesnt work for me

*I don have SD card on my phone, so does that means that i can't connect my s2 using cable to my PC (Vista)??

*since my pc cant detect my s2, which there is no proper way to close the connection, is it save for me to unplugged the cable that connected to the pc?? will it damaged my s2?

Harry2 · November 22nd, 2011, 03:55 AM

I don't know if your internal storage can be connected to PC.

But maybe you could try to connect via WiFi.
I use EStrongs File Explorer to access shares in my home network by WiFi.

Harry

chanchan05 · November 22nd, 2011, 04:24 AM

You need to have Samsung Kies installed on your PC. That program downloads the correct drivers from the internet if you connect your SGS2 to that.

imkelvin91 · November 22nd, 2011, 06:42 AM

thanks guys.. now i finally to connect it to the pc.. but how do i safety remove it? just unplugged the cable???

chanchan05 · November 22nd, 2011, 06:54 AM

Would depend on how you connect.

If you are on debugging eject properly
on Kies mode, look at your phone first. If its in Kies mode (you'll see a usb pic and a message below) just follow the message "press home to exit kies mode" then pull.
In mass storage mode, you safely remove from PC, turn of USB connect on your phone, then pull.

chanchan05 · November 22nd, 2011, 06:55 AM

Would depend on how you connect.

If you are on debugging eject properly
on Kies mode, look at your phone first. If its in Kies mode (you'll see a usb pic and a message below) just follow the message "press home to exit kies mode" then pull.
In mass storage mode, you safely remove from PC, turn of USB connect on your phone, then pull.

badboybis · April 9th, 2012, 08:08 AM

I have the same problem with my galaxy s2 but could not figure it out. Please help

HPRL · April 10th, 2012, 07:07 AM

Make sure you have a proper USB cable! I had a few failed attempts to connect using a USB cable which is meant for charging. After exchanging this with the original USB cable it went smoothly. :-)

Quote:

Originally Posted by imkelvin91

i am currently using S2 i9100g. When i connected my s2 to the pc, it failed to find the driver/ install it.
How to solve this problem?
i've tried using :
-Enable usb debugging from Menu > Settings > Applications
-return to home screen
-plug usb cable in
-pull down status bar
-press ‘ connect usb storage’ button

or try this method:

Alternatively, without USB debugging enabled

Go to Settings > Wireless & Network > USB utilities and click the button > then (and ONLY then) plug in USB cable

But it still doesnt work for me

*I don have SD card on my phone, so does that means that i can't connect my s2 using cable to my PC (Vista)??

*since my pc cant detect my s2, which there is no proper way to close the connection, is it save for me to unplugged the cable that connected to the pc?? will it damaged my s2?