This should kick off some development on this device.
USE AT YOUR OWN RISK!!!
As often as possible we build things from scratch and while this yields better long term results it is more risky at the beginning. These files are the same boot.img made from source packed for convenience. But, first:
This is a set of generic instructions that should cover most situations you might encounter working with Samsung
devices, boot, recovery and roms. It is not intended to be exhaustive, but concise.
To flash a kernel with fastboot (assuming you have fastboot):
if you have adb on your computer run this command: adb reboot bootloader
if it goes into Download Mode run this command: fastboot devices
if the prompt returne the device serial number you can flash the recovery or boot image.
FOR RECOVERY: fastboot flash recovery recovery.img
FOR BOOT: fastboot flash boot boot.img
To flash a kernel with ODIN flashing tool:
if you have adb use this command: adb reboot bootloader or adb reboot download
Once the device is in Download mode connect it to the computer. The first "Slot" will populate with
some info about your device and the smaller window will be yellow.
Make sure "repartition" does NOT have a check mark and make sure "reboot" has a check mark
From PDA find the .tar file you want to flash and let it RIP!
To flash a .zip in CWMR:
If you have adb use this command: adb reboot recovery
Once in recovery you will be presented with a menu; chose flash zip, not update zip
navigate to the file you want to flash and LET IT RIP!
If you need further instructions, find a member of OUDHS on IRC.
I don't have ODIN, Google if you need it.
Tools to get the job done:
<<< fastboot and adb for windows
USE AT YOUR OWN RISK!
Courtesy of your friendly neighborhood HITSQUAD!