1. Hot New Devices! HTC One M9 | Samsung Galaxy S6 | LG G4

3G on M835Tips


  1. Apocalypz

    Apocalypz Member

    Yep, it was becasuse of CM7 I would enter the code and nothing would happen. So anyway, I set it to Manufacturer mode and installed those USB drivers from their site, still can't get the ports to be recognized in neither Win7 or WinXP. I keep getting 4 Android Adapter under "Other devices" in Device Manager in both XP and WIn7. I try manually updated the driver and pointing them to the M835 USB driver folder that you gave me first and won't recognize it. Also tried pointing it to ADB driver folder that's on the phone itself and won't take that either. I'm stumped.
  2. hyphieboy

    hyphieboy Member

    Yep put it in manufacture mode before I started but no luck
  3. leolupin

    leolupin Member

    Put the phone in manufacture mode, usb debugging, and unmounted the sdcard. I tried installing the driver on the phone, the one cybertail posted, the modemdriver, handheld android device driver from the huawei site, everything. All that shows up on win7 and winxp is the modem driver, not the com port. And I have 4 android adapters on there that can't be recognized. I tried manually pointing them to each driver but none work...
  4. CyberTails

    CyberTails Well-Known Member

    Strange, for when you have the phone plugged in, can to go to the device manager, right-click one of the Unknown Devices from the phone, select Properties, go to Details and Ctrl+C the Hardware ID? :)
  5. leolupin

    leolupin Member

    This is a screenshot of my device manager with the android-related devices expanded. The "unkown" devices with no drivers have their hardware ids (each has two) pasted next to them.

    Attached Files:

  6. leolupin

    leolupin Member

    Another thing; the Android Modem that's on there is port COM5, found that out by looking through the properties on it. Whenever I connect with CDMA Workshop, it says connected, but the phone stops saying "USB connected" and "USB debugging connected." Then I click "Read" and it says phone does not answer.

    Then I can't connect my phone to my pc anymore unless I restart my computer. The same thing happens if I use QPST, and using LGNPST just doesn't work.

    EDIT: Has anyone actually had success is manually flashing the new .prl file yet?
  7. Tokenpoke

    Tokenpoke Well-Known Member

    I updated in my test m385 with mate35 rom.

    I can't check signal on UT as it isn't connected but 3022 is on it.
    I actually downgraded to 3019 first, via *228.

    When I used qpst no code was needed, I opened com ports and clicked "add port" until my phone showed up.

    Also, putting 3022 on before flashing a rom it stays at 3022.
  8. CyberTails

    CyberTails Well-Known Member

    I actually use CDMA Workshop for PRL Manipulation and I haven't tested Mate35 because I'm patiently waiting for a Wi-Fi fix for any M835 Mod :)
  9. SoulDroid1

    SoulDroid1 Well-Known Member

    Hey, guys. I'm trying to get the drivers installed that CyberTails linked a while back (M835ModemDriver.zip). But I have a problem. After installing, on the last screen, I get:

    I'm running Win7HP 64. I'm wondering if it's that these drivers are 32 and my system is 64.

    Any help would be appreciated.

    EDIT: Never mind, I got it. Now to flash this phone to Cricket!
  10. skateflip977

    skateflip977 New Member

    hey guys i connected my m835 with debugging and manufacture mode on. i have a couple of questions. First: how do you install the m835modemdrivers.zip? theres 4 files in there so do you leave it as a zip or extract it? second when i installed some kind of drivers for adb i went to device management and theres no ports section whatsoever... theres no ports only other devices with like 4 android adapters when the phone is in, but no "Ports" tree after that... my internet's been slow lately and i would really like to do this upgrade... please help? :)
  11. Slander

    Slander Member

  12. AesopRock

    AesopRock Active Member

    i stayed up all night one night tryin to get this to work. I have experience in the IT field and am good with stuff like this. I have win xp and i couldnt get my phone to show up as a port or anything like that i give up! im in NH anyways so most likely theres no metropcs 3g towers around here lol
  13. Slander

    Slander Member

    What exactly did you do? I also have Win7 64 and got the same error...
  14. paultizzle

    paultizzle Active Member

    does anybody think there might be 3G in L.A. or is that to ghetto???
  15. deadlyassasin8

    deadlyassasin8 New Member

    so how do i use the m835 modem driver? i have everything else needed to flash my phone to 3g but i am stumped as what to do next :eek:
  16. CyberTails

    CyberTails Well-Known Member

    Oh, for any other Philly Metro Users, I asked my local Metro (on Sept. 30th) and they said that 3G will be up in a couple of months :)
  17. totlth

    totlth Well-Known Member

    Thank you this was very helpful. I found prl 3023 and installed on phone and 3G baby. The prl 3022 worked to, but it was in and out of 3G.

    attached prl 3023. Hope it works in your area.
    drkcobra likes this.
  18. SoulDroid1

    SoulDroid1 Well-Known Member

    Sorry it took so long for me to reply. Been busy with work and a way to flash my M835 to Cricket since I no longer live in a MetroPCS service area.

    If CyberTails drivers don't work (they didn't for me), the ones I have might. These are for Windows 7 64-bit. I tried them on an XP Pro 32-bit system at work and it was obviously a no-go.

    After diligent searching on teh Interwebz with many, many dead ends, a site called DriverMax claimed to have the drivers. They did require that I download their program to obtain the drivers. Anywho, I installed the program, then the drivers, and it worked. I'm able to use CMDA Workshop and QPST successfully.

    I would add that you manually delete any other drivers or use something like CCLeaner to remove any previously installed drivers you tried from this thread, then install.

    Hope this helps!

    Attached Files:

    drkcobra likes this.
  19. fonzi1289

    fonzi1289 Active Member

    ANybody have the drivers for the M835 windows 7(32 bit)? All the ones i try say not compatible on my platform
  20. Goldenakin

    Goldenakin Well-Known Member

    Also a driver for windows xp would help also :)
  21. jefffran

    jefffran Member

    need drivers running windows vista 32
  22. starxpilot

    starxpilot Well-Known Member

    We're now on 3025. I'll see if I can find a PRL, but looks like this new one can't seem to be copied...
  23. jefffran

    jefffran Member

    Nvm manage to do it and got prl 3024 on it thank you
  24. ur_okay3

    ur_okay3 Member

    can you plz post how you did it:confused:.... am tired of the slow ass 1x:mad:..... thanks :D

Share This Page