Adamz Low Voltage Vs. Chevys


Last Updated:

  1. iamloco724

    iamloco724 Well-Known Member This Topic's Starter

    Joined:
    Nov 6, 2009
    Messages:
    739
    Likes Received:
    4
    which do you pick and why?
     

    Advertisement
  2. vincentp

    vincentp Well-Known Member

    Joined:
    Nov 11, 2009
    Messages:
    1,640
    Likes Received:
    59
    Chevy's, because I know that it's stable and fast on my phone. Don't want to change what isn't broken.
     
  3. PerCompLLC

    PerCompLLC Well-Known Member

    Joined:
    Dec 20, 2009
    Messages:
    521
    Likes Received:
    128
    Adamz for the exact same reason... :D
     
  4. ChevyNo1

    ChevyNo1 Well-Known Member

    Joined:
    Feb 11, 2010
    Messages:
    77
    Likes Received:
    40
    About the only differences between AdamZ's and mine:

    1. Potentially different slots/speeds
    2. Potentially varying voltages
    3. I include TUN in my kernel which some people need.

    All in all, like the other said, it's what works best for your phone, and there are enough differences in the hardware such that one may work better for you than another, where it could be the opposite for someone else.
     
  5. PerCompLLC

    PerCompLLC Well-Known Member

    Joined:
    Dec 20, 2009
    Messages:
    521
    Likes Received:
    128
    Agreed! I have used both, and I'm a fan of both. However, Adamz worked better on my droid for the UltimateDroid ROMs. And, if it ain't broke, why fix it? :)
     
  6. OMJ

    OMJ Bazinga VIP Member

    Joined:
    Nov 27, 2009
    Messages:
    3,288
    Likes Received:
    825
    Sorry to hijack

    chevy I am curious if you have considered making kernels for Koush's cyanogenmod. I would love to see a low voltage 1.2 kernel.
     
  7. ChevyNo1

    ChevyNo1 Well-Known Member

    Joined:
    Feb 11, 2010
    Messages:
    77
    Likes Received:
    40
    Yes, I actually did compile a test kernel for his ROM's and had another verify it did work ... but to date I have not gotten any further with it ...
     
  8. GirLuvsDroid

    GirLuvsDroid Well-Known Member

    Joined:
    Jan 5, 2010
    Messages:
    1,307
    Likes Received:
    515
    For me, it definitely has differed from ROM to ROM. On the 2.0.1 ROMs I tried, Chevy's kernels ran cooler than Adam's or DroidMod's, at the same level (1.2GHz). I switched to ESE53 over the weekend and tried several kernels. It turned out that Adam's medium-voltage runs cooler on my current ROM than Chevy's or Adam's low voltage.
     
  9. jackburnt

    jackburnt Well-Known Member

    Joined:
    Dec 8, 2009
    Messages:
    663
    Likes Received:
    63
    I've had SS 2.0.3 on my phone longer than any other ROM. It works so well, so need to change.

    I'm sure Adamz is awesome too. I used his for a week a while back.
     
  10. Redflea

    Redflea Well-Known Member

    Joined:
    Oct 6, 2009
    Messages:
    2,623
    Likes Received:
    289
    I use SS 2.03 w/Adamz's low volt 1.1...
     
  11. IzelTokatl

    IzelTokatl Well-Known Member

    Joined:
    Dec 11, 2009
    Messages:
    580
    Likes Received:
    90
    Dumb question, are both apps for undervolting the CPU to extend battery life, and reduce heat?
     
  12. nstallion

    nstallion Well-Known Member

    Joined:
    Nov 13, 2009
    Messages:
    1,152
    Likes Received:
    136
    I put the words "bekit" "p3droid" "chevyno1" "adamz" on bits of paper and put them in a hat. I then shuffle it around and pick one out.

    I personally can't tell the difference. I've never had a kernel from any of them that was unstable. I can't see any difference in performance or battery life.
     
  13. nstallion

    nstallion Well-Known Member

    Joined:
    Nov 13, 2009
    Messages:
    1,152
    Likes Received:
    136
    Yes. Some CPUs can't handle the lower voltage and higher clock speeds and maintain stability though which is why the medium voltage kernels exist.
     
  14. IzelTokatl

    IzelTokatl Well-Known Member

    Joined:
    Dec 11, 2009
    Messages:
    580
    Likes Received:
    90
    thanks, I do this on my laptops with RightMarkCPU, I've been looking for something similar for my Eris... now just waiting for kernels to play with.
     
  15. YankeeDudeL

    YankeeDudeL Well-Known Member

    Joined:
    Oct 25, 2009
    Messages:
    2,170
    Likes Received:
    516
    After trying all of them, the one that works best for my Droid is AdamZ's LV 1.2GHz. I only could get up to 1.1GHz on Chevy's, and P3 and Bekit's always ran a lil hotter and not quite as responsive. Just weird how each Droid is so diff.
     
  16. IzelTokatl

    IzelTokatl Well-Known Member

    Joined:
    Dec 11, 2009
    Messages:
    580
    Likes Received:
    90

    If this is anything like the PC world... its because of the chips abilities. Each chip is cut from a large silcon waffer. Depending on the location chip 1a and chip 1az (of the same 1 waffer) will have different max and min limits. This is why the semiconductors always set a general voltage and speed rating on their chip sets.

    Same thing happens on laptops/pc's. identical machines and processors some can be volted down and remain stable others will crash right away and must remain at the same voltage. Thats all these phones are... fun portable computers.
     
    YankeeDudeL likes this.
  17. YankeeDudeL

    YankeeDudeL Well-Known Member

    Joined:
    Oct 25, 2009
    Messages:
    2,170
    Likes Received:
    516
    Ah, no one's ever had an answer before. Learn something new everyday. And since it's 3:30 in the am, I have the rest of the day to be ignorant!
     

Share This Page

Loading...