Com Port issues after OTA?Support

Last Updated:

  1. mort_subite

    mort_subite Member This Topic's Starter

    Aug 26, 2010
    Likes Received:
    So after a bunch of frustration, I finally got talk and text working on my Moment M900 on the Cricket network (still waiting for some more official Cricket ROMs to leak to set up WAP and MMS). At any rate, after I OTA'd the phone, I wanted to do something in QPST, so I hooked up the phone in diag mode (##8778# to put it into Modem mode, Debugging active and Dial Up Networking). The phone connected in diagnostic mode, but connected to a different port than before I had OTA'd it, and QPST wouldn't connect or recognize it anymore. Oddly, CDMA Workshop would connect, but still wouldn't read it.
    Seeing as how the port it connected to was com port 8, I changed it to a lower port number (port number 2), because I had heard CDMA Workshop sometimes has issues with anything above port 6. Still no luck.
    The weird thing is that the port I was using it on before I OTA'd (port1) claimed it was still in use. In a last ditch attempt to get it working, I connected to port 1 anyway, and still had no luck.
    Anyone have any ideas?

    Thanks in advance!



Share This Page