Decrypt/Rip DVD (which I own) to EVO?Support


Last Updated:

  1. spmoore1

    spmoore1 Member This Topic's Starter

    Joined:
    Jun 5, 2010
    Messages:
    7
    Likes Received:
    0
    I have spent the past 6 hours trying to copy Matrix Revolutions (std def) to my new EVO with no luck. I purchased the dvd so I have no problem with asking how to decrpyt and then rip to my laptop so I can transfer to EVO. Can anyone point me to a thread or similat which will walk me through the steps to (1) decrypt, (2) rip to laptop, (3) copy files to EVO and (4) view on EVO. I need to know software names, settings, Android apps, etc... (the whole works) to do this properly. I have read a lot of info and I am getting close, but I just can't seem to get everything to work properly.
     

    Advertisement
  2. Rob_A

    Rob_A Well-Known Member

    Joined:
    May 28, 2010
    Messages:
    831
    Likes Received:
    216
    back in the day when I was a DVD ripping fool I'd use;

    1 - anydvd running inthe background
    2 - DVD shrink to rip and shrink an iso to fit 4.7GB dvd
    3 - if DVD shrink didn't work, I'd use DVD decrypter
    4 - DVD decrypter to burn the ISO to a DVD

    DVD decrypter is now "Imageburn"

    And I'm not 100% sure what will turn the ISO or VOB files to MP4.

    I've heard many say "Handbrake" will do this and you just choose MP4 for iphone.
     
  3. spmoore1

    spmoore1 Member This Topic's Starter

    Joined:
    Jun 5, 2010
    Messages:
    7
    Likes Received:
    0
    I tried handbrake, but did not realize the files were encrypted (yes, I am a novice). It tooks about 3 hours with handbrake to get garbage. I then tried a decypter which appeared to work, but the finished files were .AVI and I could not figure out what to do with them after that. So I should try decrypt then handbrake to convert to MP4?
     
  4. swazedahustla

    swazedahustla Well-Known Member

    Joined:
    Jun 1, 2010
    Messages:
    178
    Likes Received:
    28
    Try downloading a program called double twist to your computer. It will automatically format the video into the correct format for the EVO, wont take any effort from you.
     
  5. spmoore1

    spmoore1 Member This Topic's Starter

    Joined:
    Jun 5, 2010
    Messages:
    7
    Likes Received:
    0
    Have you tried this? I read in the XDA forum the resolution was poor and handbrake provided a much higher quality picture. I have doubletwist on my EVO which I planned to use for viewing. Are you saying I can download doubletwist to my laptop and decrypt/rip dvd's and then transfer to the EVO?
     
  6. spmoore1

    spmoore1 Member This Topic's Starter

    Joined:
    Jun 5, 2010
    Messages:
    7
    Likes Received:
    0
    I tried double twist on the encrypted dvd and the result is blotchy mess. Perhaps this software would work if I decrypt with another software first. What a mess. :(
     
  7. jcthorne

    jcthorne Well-Known Member

    Joined:
    Jun 4, 2010
    Messages:
    137
    Likes Received:
    18
    Doubletwist does not recognize the EVO, just a generic android phone and down grades the video to 480x320. EVO is capable of 720p video. Perhaps the authors of doubletwist or handbrake will come up with a profile for EVO that works. With over 100,000 new users there just might be others looking for this.

    I have yet to find a spec that shows what EVO can play at 720p other than the 3GPP format it records in.
     
  8. spmoore1

    spmoore1 Member This Topic's Starter

    Joined:
    Jun 5, 2010
    Messages:
    7
    Likes Received:
    0

    So have you tried to get a DVD onto the EVO yet? Any luck at any resolution? Suggestions?
     
  9. Rob_A

    Rob_A Well-Known Member

    Joined:
    May 28, 2010
    Messages:
    831
    Likes Received:
    216
    psp or iphone should work fine
     
  10. cggeek911

    cggeek911 Member

    Joined:
    Jun 6, 2010
    Messages:
    9
    Likes Received:
    1
    You can download DVD Decrypter and AVS Video Converter.

    Pop in your DVD then launch DVD Decrypter. It should automatically read the DVD. Now click on the yellow folder in the Destination area, name your folder and click OK.

    Click the Decrypt icon at the bottom. Once completed this will create a set of VOB files in your destination folder. There are usually a bunch of these files so I click thru the first few of them to find out which will start to play the full length movie.

    After this I launch the AVS Video Converter. Click on the Browse button in the Input File Name section and find the VOB file that launched the full movie.

    Click on the Browse on the Output File Name. Name your file and change the file type to .m4v (MPEG 4 video file) and save.

    Click convert now and you should be able to move the video file over to your SD card once finished.

    The one I downloaded was a non activated version and it puts watermarks in the very beginning and end credits but they aren't present throughout. Once I got my movies to my EVO, the quality was good and not pixelated or choppy.

    Hope this helps.
     
  11. sikclown

    sikclown Well-Known Member

    Joined:
    Nov 21, 2009
    Messages:
    1,910
    Likes Received:
    965
  12. Munroe

    Munroe Member

    Joined:
    May 19, 2010
    Messages:
    10
    Likes Received:
    2
    AnyDVD and Handbrake works perfectly. Both FREE though AnyDVD will be a 21 day trial. That should be more than long enough to get all your DVDS to the way you need them.

    I have 4 movies on my EVO right now cus of it, and the quality is amazing. Look for the online walk through of how to use Handbrake so that the videos are formatted correctly on the video, and audio tabs of handbrake.
     
    smi77y likes this.
  13. mwintz

    mwintz Member

    Joined:
    Feb 25, 2011
    Messages:
    9
    Likes Received:
    1
    I spent HOURS ripping a movie from DVD to my laptop using Handbrake (I used the step-by-step directions found on the "Know Your Cell" web site to rip it to MP4 format). Unfortunately, when I play the movie on my HTC EVO 4G (or even Windows Media Center) all I see is a mess of pixels !!! Any suggestions ? Thank you.
     
  14. amer3

    amer3 Member

    Joined:
    Jul 21, 2010
    Messages:
    8
    Likes Received:
    1
    AnyDVD and CloneDVD™ mobile works great
     
    mwintz likes this.
  15. sitlet

    sitlet Banned

    Joined:
    Apr 11, 2010
    Messages:
    5,867
    Likes Received:
    633
    handbrake doesnt rip, just converts. You have to rip first with either DVD Shrink, DVD Decrypter, or DVD Fab.
     
    mwintz likes this.
  16. mwintz

    mwintz Member

    Joined:
    Feb 25, 2011
    Messages:
    9
    Likes Received:
    1
    I downloaded anyDVD and ran it. The software is pretty minimalistic, so now I can't find the file it created so I can run it through Handbrake ? (Yes, I'm not much of a techie). Thanks....again.
     
  17. SportsPT

    SportsPT Active Member

    Joined:
    Feb 3, 2010
    Messages:
    40
    Likes Received:
    9
    Handbrake will rip and convert...at least it did for me. All I did was select the iphone 4 settings and started it. Takes awhile but works. Transfer onto SD card and use any number of apps (stock or market apps) to play it.
     
  18. joeg215

    joeg215 Member

    Joined:
    Jan 30, 2011
    Messages:
    20
    Likes Received:
    1
    When you guys say hours, how many are you talking? I get to about 6% then i notice the ETA start to shoot up dramatically up to like 7 hours.. Does it really take that long? Im using Handbrake
     
  19. mwintz

    mwintz Member

    Joined:
    Feb 25, 2011
    Messages:
    9
    Likes Received:
    1
    It took me about 3 hours to convert a 1 hour movie using handbrake. Then, all I got when I ran it in both Windows Media Center and my EVO 4G was pixels !!! SportsPT seemed to be able to do this successfully, so I must have missed a setting, or ??
    I will try again and let you know if/when it works.
     
  20. ric221

    ric221 Member

    Joined:
    Jan 9, 2011
    Messages:
    16
    Likes Received:
    1
    i use andsoft video converter to do mine. works good but does take a while to convert on my machine
     
  21. xefe

    xefe Well-Known Member

    Joined:
    Jun 27, 2010
    Messages:
    159
    Likes Received:
    21
    dvdfab has a really easy interface and works great
    they offer trials and betas to use for free also.

    www.dvdfab.com
     
  22. Mr. Ed

    Mr. Ed Well-Known Member

    Joined:
    Jun 27, 2010
    Messages:
    6,675
    Likes Received:
    1,464
    ocnbrze likes this.
  23. joeg215

    joeg215 Member

    Joined:
    Jan 30, 2011
    Messages:
    20
    Likes Received:
    1
    Update: I tried double twist and was pretty impressed with the speed. Took maybe 1 hour for a 2 hour movie and the quality was good. The only gripe I have is that the video doesn't play fullscreen on the EVO (its more widescreen). Maybe I missed where I can change that but haven't found a setting option.

    I tried DVDFab, but again the conversion slows down dramatically at around 7%. Idk if im doing something wrong here.

    Next step is to try Mr. Ed's suggestion.
     
  24. mwintz

    mwintz Member

    Joined:
    Feb 25, 2011
    Messages:
    9
    Likes Received:
    1
    Thanks Mr Ed. Does DVDVideoSoft remove the DRM stuff as well ?

    Appreciate the tip.
     
  25. Brucew0617

    Brucew0617 Banned

    Joined:
    Jan 27, 2011
    Messages:
    269
    Likes Received:
    7
    Nope, I think DRM is an protection which different to the protection in DVD disc, and as I know, there is not still a good tool to remove DRM from digital movies.
     
    mwintz likes this.

Share This Page

Loading...