Factory Reset Screwed Up Superuser


Last Updated:

  1. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
    Ok I had to do a factory reset because when I upgraded to 2.2 my phone was laggy but now its fine. But now whenever I open Superuser all I see is a black screen with "Superuser Preferences" under the notification bar.
     

    Advertisement
  2. D13

    D13 Well-Known Member

    Joined:
    May 28, 2010
    Messages:
    2,088
    Likes Received:
    234
    that is how its supposed to be until you start using root apps and allow them root access
     
  3. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
    I installed and opened ShootMe an it says I'm not rooted :(
     
  4. WalmartSecurity

    WalmartSecurity Well-Known Member

    Joined:
    Apr 29, 2010
    Messages:
    313
    Likes Received:
    201
    Just to clarify you carried over root from 2.1 to 2.2, then did a factory reset and lost root?
     
  5. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
    That is correct, but Superuser still is on my phone.
     
  6. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
    It won't uninstall either.

    EDIT: Any similar superuser app unsuccessfully installs.
     
  7. sund0wn

    sund0wn Well-Known Member

    Joined:
    Aug 10, 2010
    Messages:
    775
    Likes Received:
    175
    do you have titanium backup installed? if so, try hitting the problems button, and reinstall busybox.
     
  8. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
    It just closes and says "Titanium Backup- Failed! See webpage for troubleshooting steps."
     
  9. Crondar

    Crondar Active Member

    Joined:
    Jan 25, 2010
    Messages:
    32
    Likes Received:
    2
  10. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
  11. Crondar

    Crondar Active Member

    Joined:
    Jan 25, 2010
    Messages:
    32
    Likes Received:
    2
    Read the instructions at the top of that post, skip down to the part it tells you about using the SBF, once all those steps are complete (don't have to do the root part if you do not wish to be rooted) and then jump up to the apply 2.2 step.

    After the sbf install, it may get stuck in a boot loop, don't worry, simply do a battery pull, boot into recovery and do a factory reset, then reboot and apply the .604 step.

    I have done this a couple of times now and it works fine

    Chris
     
  12. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
    Sorry to be a pain but can you just tell me which headings to follow and what order to do them in? I'm a newb at this if you didn't notice.
     
  13. Crondar

    Crondar Active Member

    Joined:
    Jan 25, 2010
    Messages:
    32
    Likes Received:
    2
    Follow these steps in THIS order. The isteps marked in red are only if you want a rooted 2.2 Froyo, if not, skip those.

    Chris

    To Apply SBF


    1a. Download RSD Lite

    SBF INSTRUCTIONS: Install the RSDLite 4.7 program by double clicking on the program.
    Move the pst_flash.ini file into the following folder --> Program Files/Motorola/RSDLite

    1b. Download .604 update HERE rename to update.zip and place in root of SDcard

    1c. Download SBF from HERE

    2. Install the drivers that apply to your Operating System. (attached are Win 64 bit drivers)

    3. Unzip the SBF into a folder.

    4. Open RSD Lite and find the UNZIPPED SBF

    5. Put your Motorola Droid X in bootloader mode (With Device off, Press Volume Down and camera buttons then press power). Now connect the Droid X via usb.

    6. Click start and sit back.

    7. Device will reboot automatically and you will need to remove battery to power down

    To Apply .604

    1. Press home button then power button to boot in recovery.

    2. Press search key to show recover options

    3. Use volume rocker to move down to "run update.zip"

    4. Press okay

    5. After completed scroll down to format device and click ok

    6. After formats complete scroll up to reboot device

    Use 1 Click Root

    1. Download File droidxroot.zip from
    HERE

    2. Plug in droid x and set to pc mode


    3. Made sure USB debugging is enabled (settings...applications...development)


    4. Run 1 Click Root


    5. You have to toggle bluetooth and press continue at same time (when it ask you to) Can try again if it doesn't work the first time


    6. You can now Apply Froyo 2.2 Update

    Apply Froyo 2.2 Update

    1. Run "adb shell" (you can use root explorer or terminal)

    2. Run "mount -o rw,remount /dev/block/system /system"

    3. Run "mv /system/bin/su /system/xbin/su"


    4. Copy update.zip form HERE or HERE or HERE to your sdcard

    5. Reboot into recovery (power down - hold home button and press the power button)

    6. Run update.zip

    7. After Completed Reboot
     
    InfiniteWalrus likes this.
  14. Rockaholic

    Rockaholic Well-Known Member This Topic's Starter

    Joined:
    Jul 10, 2010
    Messages:
    380
    Likes Received:
    27
    Thank you very much! I'll let you know how it turns it when I'm done.

    So it's in Bootloader mode and I have the sbf selected but it's not letting me click start.
     

Share This Page

Loading...