Geniatech Enjoy TV


Last Updated: 2015-01-13 21:39:04
  1. fcatrin

    fcatrin Member

    When you are ready, tell me if you need the whole document or just a section.
    chinabox likes this.
  2. sku||

    sku|| Well-Known Member

    huh ?? Smash it :D
    You don't need to make a hard reset on the remote control .. Just buy another remote control . maybe a keyboard , mouse and connect them to the ATv ..
    Or smash it into the wall :D
  3. everst

    everst Well-Known Member

    good advice, im using my wireles mouse
  4. enviro8

    enviro8 Well-Known Member

    Thank you.

    The whole document would be great as the online translator seems to miss out on or misinterprets some critical points making them counterintuative.
  5. avirex

    avirex Well-Known Member

    sku|| likes this.
  6. avirex

    avirex Well-Known Member

    Hi Dan, did you figure out this problem? I may be able to help.
  7. chinabox

    chinabox New Member

    Hi guys,

    I also have a briked ATV2000 (full story available in whirlpool forum ;-).

    I ordered a USB to 3.3V UART/232/TTY/serial "cable" with FTDI chipset from ebay and will try to unbrick mid of january next year using "putty" software and the KDG team instructions.

    It seems that quite a few people have bricked ATV1000/ATV2000 units and I hope soon there will be many people with unbricked units!

    MfG
    chinabox
  8. enviro8

    enviro8 Well-Known Member

    Welcome to the ATV BRICK community. If we work together we should triumph over evil!
  9. faoit

    faoit Active Member

  10. everst

    everst Well-Known Member

    this is a very good news plus this is a real think,thats why chosed geniatech for the firmware suport.
  11. stasik

    stasik Well-Known Member

    does it mean we ll jump over version 3 all together? i have a tablet running version 3 and i can say its pretty good. well, if it will be version 4, even better. good job geniatech and android developers!
  12. faoit

    faoit Active Member

    Even if the video title is about an "Android 4.0 (Ice Cream Sandwich) Firmware Preview" for ATV series, the last frames of video show a new device: the "Enjoy TV Nano 3"!
    It means they are going to launch a new one that supports it ...
  13. gboijhpok

    gboijhpok Well-Known Member

    TE=fcatrin;3687410]I can translate it for you, if you want. I'm a native spanish speaker who understands Linux and technical docs :-D[/QUOTE]


    I think that contact support@geniatech.com is the best solution, they will help you on this, perhaps will send you a serial adapter for updating the box.
  14. gboijhpok

    gboijhpok Well-Known Member

    Quote:
    Originally Posted by VITALIJ
    hi friends.
    I have a problem and I need your help.
    I was trying to improve my AVT1000, and I tried to do a firmware update ... AVT1000 try received the new firmware, and moved green bar at the bottom of the TV screen. but in the middle of the road stood a green bar. I waited about 20 minutes - but the green bar stop. it froze completely. I disconnected the unit from the power supply and again on power supply .. and oh my god my AVT1000 died ((Now I know are always just a white screen. and this is no longer wanted to work in any mode. perhaps you have a tip for me - I can restore the device to a help computer or even any way?

    I apologize for my bad English
    I'm still in pain. perhaps you have an idea how to recover with help computer?



    December 20th, 2011, 08:46 PM #604 (permalink)
    fcatrin
    New Member

    Join Date: Nov 2011
    Posts: 5

    Device(s):
    Thanks: 0
    Thanked 2 Times in 2 Posts

    Quote:
    Originally Posted by enviro8
    The guys over at KGDTeam • Ver Tema - Recovery por RS232 los Mygica ATV300 - ATV1000 - ATV2000
    have devloped a technique to unbrick a thw atv 300, 1000 and 2000.

    Basically it is reprograming or reviving uboot and some other stuff via the unit's ttl interface.

    I am in the process of trying to unbrick an ATV 1000 clone

    Now the problem is that it requires a RS232 to ttl converter to get the info from a PC to the TV Box. I got one from China. The next problem is the connectors for the ttl interface on the TV Box. They are too small for the ones supplied with the RS 232 to TTL converter. It can accommodate three of the four connectors (Rx, Tx and VCC) and I have found a common earth point for the fourth.

    The next problem is a PC with an RS232 output. They are not common on newer PCs. I have two old laptops with RS232 outputs but one would not boot and the other only has a 3.5" floppy and no USB port. I do not have a way of transferring the program to it as no other computer I have operational has a a 3.5" floppy drive.

    As a result I am currently building up a new very basic PC from bits and pieces I have laying around.

    Then I think I have to install and learn a bit of Linux to be able to use it.

    And finally the instructions are in Spanish and require some deep thought when interpreting the English translation.

    I would love to trade experiences with anyone else trying to unbrick their units.

    ----------------------------

    I think that contact support@geniatech.com is the best solution, they will help you on this, perhaps will send you a serial adapter for updating the box.
  15. szemo77

    szemo77 Well-Known Member

    Any special TTL is no needed! Simple ttl cable on RS232 with TX, RX and GND.
    For ATV1000 or ATV2000 you need only basic spi_M3_512.bin - that file we need form Geniatech support. But i think you can use spi from one spi update package.

    Remember You do it at their own risk! I recommend that only to people with experience with linux or router developer.

    Recovery procedure is here (I use it on bricked ATV300).
    Serial manual.pdf - 4shared.com - document sharing - download

    1st clear the nand, 2nd Load spi and 3rd load update image. Done.
  16. enviro8

    enviro8 Well-Known Member

    Thank you for this.

    I will give it a go when I get my PS with RS232 output built (I have had to order a compatible power supply)
  17. stasik

    stasik Well-Known Member

    one thing i noticed with 11 30 fw, that once u adjust the screen position, after reboot it shifts rigth-down by 2 moves. hope in the next update, the screen position will stay as selected.
    and another thing is some app in market are not there. i can easily install them on my tablet, but can not see them on market. i ll have to look at that guite posted earlier on somewhere about this
  18. faoit

    faoit Active Member

    niking, Surcouf35 and sku|| like this.
  19. everst

    everst Well-Known Member

    will be launched next year and i hope that the new firmware will work smothly and no laghey
  20. sku||

    sku|| Well-Known Member

    AAWWWWWWWWWWWWWWW YEAAAAAAAAHHHHHHHHHHH !!!!!!!!!!!!!!!!!!!!
    ICS will be on ATV !!!!!!!!!!!!!!!!!!!!!!!!!!!!
  21. szemo77

    szemo77 Well-Known Member

    It will be released in February 2012. One of the distributors (iconBit) has announced that it will upgrade to all ATV models with min. 512MB Ram.
  22. sku||

    sku|| Well-Known Member

    huh ?? Feb 2012 ??? So longggggggggggggggggggggg :< I can't wait to use ICS on my ATV :(
  23. VITALIJ

    VITALIJ Member

    ________________________________________________________
    I wrote a letter asking for help to support Geniatech, but no response is received. someone tell me where I can get the file basic spi_M3_512.bin ?
    thx.
  24. Punkored

    Punkored Well-Known Member

    This is good news that will put the gadget ATV Android 4.x

    But it may not have yet fully braced version 2.3.4 and are jumping 4.x without the prior apuntular above.

    I think a big mistake. Not take out the version 4.x (this is fine), but it seems a great mistake that is not finished developing the previous 2.3.4
  25. cupi1234

    cupi1234 Active Member

Share This Page