[GUIDE] Update your prl using QPST


  1. Woodstock77

    Woodstock77 Well-Known Member

    You will need QPST software and your MSL/SPC code.
    • First dial *983*87274#on your dialer and choose "only Diag"
    • Now go to your device manager and choose ports and take note of which com port your phone has installed to.
    [​IMG]


    • Now open QPST Configuration.
    • If your phone is listed skip to next step. If your phone isnt listed choose add new port and manually enter the com port number of your phone.
    • Now choose Start Clients at the top and then select Service Programming.
    [​IMG]


    • Once service progamming is open choose your phone and ok.
    • Now click read from phone on the bottom left. Here you will need to enter your MSL/SPC code.
    [​IMG]


    • Now select the Roam tab on the top.
    • Where is says Browse click and find your prl file you want to install to the phone.
    • Now choose Write to Phone and your phone will reboot and give a few errors as it does.
    [​IMG]



    When the phone boots back up go to settings/about phone/status and check your prl to make sure it updated.

    Last things dial *983*87274#on your dialer and choose "AT". If you dont your USB wont work like normal.

    Advertisement
    Timmay0106 and mac42 like this.
  2. Woodstock77

    Woodstock77 Well-Known Member

    Fixed Original post.
    mac42 and dylanp like this.
  3. Timmay0106

    Timmay0106 Member

    Hello guys, I'm having issues with this method. My ZTE is rooted and have B08C build number when I'm on this step "Once service progamming is open choose your phone and ok. Now click read from phone on the bottom left. Here you will need to enter your MSL/SPC code." I get an error when I select my phone and hit okay in the QPST program onscreen that reads "Online connection failure: Unspecified error". Also, I noticed that the phone that I see that is my own has a different number in the QPST program..., is there a reason for that?? What might be the issue? If anyone is having this same problem please let me know what you did to fix this problem. As always I appreciate all you guys here on the forum are doing, keep up the phenomenal work!
  4. aenoch

    aenoch Well-Known Member

    i have a guide using easyier software and full of pictures in the everything root topic
Loading...

Share This Page