Help getting out of emergency screen


Last Updated:

  1. SARAJEVO

    SARAJEVO Member

    So I tried to flash the CM7 on my phone. When I was done, my phone kept on getting stuck on the boot screen (blue android figure). Another problem was that for some reason I couldn't get into bootloader mode. So I tried this:
    [GUIDE] Unbricking/Unrooting/Returning to Stock Optimus M[KDZ]

    However in the middle of that process there was an error. Now when I try to turn on my phone or if I just plug it into my PC, the emergency mode screen appears (SW upgrade do not unplug). Now whatever I try I cant get it out of that mode. Help?

    Advertisement
  2. AndroidMoo

    AndroidMoo Well-Known Member

    Theres a method you can do to boot straight to the recovery. When the phone is off, (take the battery out and put it back in) press and hold the power, home, and volume down buttons. When the menu,home,back, and search buttons light up, release volume down and home.
  3. SARAJEVO

    SARAJEVO Member

    Trust me I have tried that at least 100 times. No matter what combination I try, as soon as I touch the power button it loads up that (SW upgrade do not unplug) screen. It does it instantly, and no buttons light up. It's like stuck in that mode.

    Is it possible that I have deleted the recovery and bootloader software from the phone? :confused:
  4. AndroidMoo

    AndroidMoo Well-Known Member

    Try unbricking again. If that dosen't work, there is another unbrick method here.
  5. sammyz

    sammyz LG Whiz Kid Guide

    What was the error??
  6. SARAJEVO

    SARAJEVO Member

    I think it said that it's missing a dll file, but I'm not 100% sure
  7. sammyz

    sammyz LG Whiz Kid Guide

    Find out please :)
  8. franky1pro

    franky1pro New Member

    SARAJEVO, were you able to get out of S/W upgrade screen ? i have the same problem. ive tried everything in this forum and still cant get out of it.
  9. sammyz

    sammyz LG Whiz Kid Guide

    What happens when you try to unbrick???
  10. jaymixvp

    jaymixvp Member

    i have the same problem [R&D Test Tools Log File]

    13:26:48 : Launching SW update
    13:26:48 : Unpacking KDZ
    13:26:49 : KDZ file extraced
    13:26:50 : Files were extracted.
    13:26:50 : LGMobileDL Load.
    13:26:50 : Port = -1
    13:26:50 : Connecting to phone
    13:26:59 : Check Phone mode = 2
    13:27:06 : Phone type check.......
    13:27:06 : LGMobileDL.DLL Loading....
    13:27:06 : _SetAuthMark Ok : wAuthMark(22181)
    13:27:06 : _DetachDLL Call
    13:27:06 : _DetachDLL Call End
    13:27:06 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\MS690ZV7_08.S7_08.P3018.wdb
    13:27:06 : Param : moduleDir =
    13:27:06 : Param : waitTime = 33000
    13:27:06 : Param : UsbHighSpeed = 0
    13:27:06 : Param : PhoneMode = 2
    13:27:06 : Param : BinVersion = MS690ZV7_08.S7_08.P3018
    13:27:06 : Param : AuthMark = 22181
    13:27:06 : Call fn_StartUpgrade
    13:27:07 : CDMA: wParam = 20, lParam = 420
    13:27:07 : Model Dll Msg Not Found(20, 420)
    13:27:11 : CDMA: wParam = 6, lParam = 0
    13:27:11 : Step : Main Binary Flash Erase
    13:27:11 : CDMA: wParam = 7, lParam = 1
    13:27:11 : Step : Flash Burning(SDRAM to FLASH)
    13:27:11 : CDMA: wParam = 7, lParam = 0
    13:27:14 : CDMA: wParam = 7, lParam = 1
    13:27:16 : CDMA: wParam = 7, lParam = 2
    13:27:19 : CDMA: wParam = 7, lParam = 3
    13:27:21 : CDMA: wParam = 7, lParam = 4
    13:27:24 : CDMA: wParam = 7, lParam = 5
    13:27:26 : CDMA: wParam = 7, lParam = 6

Share This Page