[Kernel][OC]rbheromax rb3 Kernel v6.0.1


Last Updated:

  1. rbheromax

    rbheromax Well-Known Member

    rbheromax rb3 Kernel:


    Linaro info:
    Code (Text):
    1.  
    2. rbheromax@agerthorn:~/kernels/kernel_raybst$ "$CROSS_COMPILE"gcc -v
    3. Using built-in specs.
    4. COLLECT_GCC=/home/rbheromax/toolchains/arm-eabi-linaro-4.7.3/bin/arm-eabi-gcc
    5. COLLECT_LTO_WRAPPER=/home/rbheromax/toolchains/arm-eabi-linaro-4.7.3/bin/../libexec/gcc/arm-eabi/4.7.3/lto-wrapper
    6. Target: arm-eabi
    7. Configured with: /mnt/jenkins/workspace/linaro-android_toolchain-4.7-2012.11/build/objdir/temp-src/gcc-linaro-4.7-2012.11/configure --prefix=/tmp/andr
    8. oid-toolchain-eabi --host=x86_64-linux-gnu --build=x86_64-linux-gnu --with-gnu-as --with-gnu-ld --enable-languages=c,c++ --with-gmp=/mnt/jenkins/works
    9. pace/linaro-android_toolchain-4.7-2012.11/build/objdir/temp-install --with-mpfr=/mnt/jenkins/workspace/linaro-android_toolchain-4.7-2012.11/build/objd
    10. ir/temp-install --with-mpc=/mnt/jenkins/workspace/linaro-android_toolchain-4.7-2012.11/build/objdir/temp-install --with-cloog=/mnt/jenkins/workspace/l
    11. inaro-android_toolchain-4.7-2012.11/build/objdir/temp-install --with-ppl=/mnt/jenkins/workspace/linaro-android_toolchain-4.7-2012.11/build/objdir/temp
    12. -install --disable-ppl-version-check --disable-cloog-version-check --enable-cloog-backend=isl --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstd
    13. c++,-Bdynamic -lm' --disable-libssp --disable-nls --disable-libmudflap --disable-shared --disable-sjlj-exceptions --disable-libquadmath --disable-libi
    14. tm --disable-libatomic --with-float=soft --with-fpu=vfp --with-arch=armv5te --enable-target-optspace --prefix=/tmp/android-toolchain-eabi --disable-do
    15. cs --disable-nls --with-gcc-version=linaro-4.7-2012.11 --with-binutils-version=current --with-gmp-version=5.0.5 --with-mpfr-version=3.1.1 --with-mpc-v
    16. ersion=1.0 --target=arm-eabi --enable-threads --enable-tls --disable-libgomp --disable-libstdc__-v3 --disable-libitm --disable-libatomic
    17. Thread model: single
    18. gcc version 4.7.3 20121106 (prerelease) (Linaro GCC 4.7-2012.11)
    19.  

    v6.0.1
    http://d-h.st/48r

    v5.1 full
    http://d-h.st/ppU


    v5 preview:
    http://d-h.st/3wY
    (until i add the last 2 things to make the real v5 full

    v4:
    http://d-h.st/bNZ



    Kernel underclocked (max 1.2 GHz for battery life):
    http://d-h.st/bBu

    Stock kernel (in case you want to flash back):
    http://d-h.st/XWN

    Odin (flash tool):
    http://s463927618.onlinehome.us/android/tools/Odin3-v3.04.zip

    Samsung USB Drivers:
    http://forum.xda-developers.com/showthread.php?t=961956

    Instructions:
    1. Put your device in download mode.
    2. You should see a yellow rectangle with COM:xx and saying ready. It means that your device is ready to be flashed!
    3. Go into the PDA section and select the .tar file.
    4. When you're done with this, ensure that the file you have is for your device.
    5. Ensure that re-partition at the left is UNCHECKED!!
    6. Press the flash button
    7. When it's finished, it should say that it's done with a green box and your device should reboot by itself
    8. Hit my thanks button ;) :thumbsup: :cool: :D

    [​IMG]
    ^^^Screenshot^^^​
    v0.1 Screenshot:
    [​IMG]
    Source: https://github.com/rbheromax/kernel_raybst
    (Had to fix source to complie with newer linaro toolchain :D )

    Advertisement
  2. rbheromax

    rbheromax Well-Known Member

    Changelog

    v6.0.1
    row sched and set to default
    intellidemand cpu gov added
    interactive cpu gov default
    few code fixes (really kangs because I cant even write the Hello World example in C)
    exfat fs module added
    finally got rid of -xxxxxdirty tag on kernel info!!!!
    tweaked freqs a bit (62mhz-1.4ghz)

    v5.1
    its the preview &:
    removed ondemand and powersave gov
    made interactive gov default
    max 1.4 ghz like stock
    removed even more unneeded drivers

    v5 preview:
    updated staging driver to latest CAF 3.4
    removed sec_debug from staging
    updated qualcomm crypto engine
    enabled swap
    added sio I/O sched and made default
    enabled interactive cpu gov
    revert to max 1.2 ghz

    v4:
    qualcomm crypto+twofish encryption at kernel level
    scrapped most of unneeded filesystems (ext2,3,yaffs/2)
    took out alot of other things
    enabled wiimote+accessories and tivo slide remote bt drivers (okay guys i know u may not use them but i find these devices very usuable)
    deadline sched. default (will change to noop next release, i just want to move away from cfq)
    some extra goodies :)

    (20130901):
    v0.3 rb3
    * powersave and ondemand govs removed
    * "-dirty" tag removed from kernel info (displays as 3.4.0-rb3-mod)
    Link removed, bootlooped

    (20130831):
    v0.2 rb3
    *avs enabled
    *max 1.2 ghz clock (no lag)
    http://dev.dtalley11.com/rbheromax/samsung/sph-m840/rb3-ring.tar

    (20130819):
    v0.1
    *linaro built (nothing extra added)
    https://www.dropbox.com/s/1fyjxn3o3ao1hkk/rbheromax-kernel.tar




    FAQ:
    Q. What is AVS?
    A. Dynamic voltage scaling to increase voltage is known as overvolting; dynamic voltage scaling to decrease voltage is known as undervolting. Undervolting is done in order to conserve power, particularly in laptops and other mobile devices, where energy comes from a battery and thus is limited.
    [​IMG]
    Q. What is "linaro built" mean?
    A. Linaro focuses on optimized open-source support of the ARM v7A architecture and ARM v8 Architecture, for example SoCs that contain ARM Cortex-A9, Cortex-A15, Cortex-A53 and Cortex-A57 processor(s). I used their toolchain to compile this kernel and make it super-efficient.
    Q. Why build kernel if CWM doesn't work yet?
    A. Well...development has to start somewhere :p
    meanbob088 likes this.
  3. joemossjr

    joemossjr Well-Known Member

    the insecure doesnt work got boot looped but stock does
  4. fatalfury

    fatalfury Well-Known Member

    Need diag port opened so i can communicate with the phone
  5. joemossjr

    joemossjr Well-Known Member

    We're still testing
  6. hitesh123

    hitesh123 Well-Known Member

    Please provide me a link of insecure kernel .... PLEASE !!!
  7. joemossjr

    joemossjr Well-Known Member

    well its not working right now still working on it
  8. hitesh123

    hitesh123 Well-Known Member

    REady to brick my phone for testing.....
    looking forward for more development.
    thanks
  9. rbheromax

    rbheromax Well-Known Member

    updated op
  10. joemossjr

    joemossjr Well-Known Member

    Thanks
  11. rbheromax

    rbheromax Well-Known Member

  12. hitesh123

    hitesh123 Well-Known Member

    Thats dirty kernel , which I am running now....
  13. rbheromax

    rbheromax Well-Known Member

    i will clean the source and make it again in right now...btw I added badass gov today ;)
  14. joemossjr

    joemossjr Well-Known Member

    Anything different?
  15. joemossjr

    joemossjr Well-Known Member

    Oh lol just thought you added your little tweaks in there lol
  16. rbheromax

    rbheromax Well-Known Member

    not yet, i got it booting, now to work on getting it how i want it....
    some ideas would be helpful :)
  17. hitesh123

    hitesh123 Well-Known Member

    V2 also boot ....
    remove that dirty from kernel name !
  18. rbheromax

    rbheromax Well-Known Member

    I'm working on it, but as it stands ATM I have no pc...I'm guessing this mean no development for u guys for a bit. I'm a teenager living with parents and just grot grounded...right after I got cwm halfway working. I will continue to sneak on and make wits and hopefully get this working :p
  19. joemossjr

    joemossjr Well-Known Member

    hahah rbherogroundedtothemax
  20. rbheromax

    rbheromax Well-Known Member

    Chill out dude, lol :p still got u a custom kernel b4 then so that's all I care about
  21. joemossjr

    joemossjr Well-Known Member

    yea ill be working on the recovery lol
  22. rbheromax

    rbheromax Well-Known Member

    Did u ever get it to build?
    If not, Email me at "rbheromax@gmail.com" and I can walk u through it
    We're soooo close to pulling this off...
    Coreygq1 likes this.
  23. rbheromax

    rbheromax Well-Known Member

    I need my new version tested, it has:
    insecure
    brazilianwax gov added
    avs enabled
    max 1.2 ghz clock (no lag)
    -dirty tag removed from kernel info
  24. joemossjr

    joemossjr Well-Known Member

    didnt boot ^^^^^6

Share This Page