LiQuID FroZeN YoGurT v1.3 (FRG22 ROM Built From Source - FAST!!!) | Motorola Droid


Poll closed due to new release for this ROM

  1. 5 Star ROM Rating: Elite

    28 vote(s)
    75.7%
  2. 4 Star ROM Rating: Outstanding

    6 vote(s)
    16.2%
  3. 3 Star ROM Rating: Average

    2 vote(s)
    5.4%
  4. 2 Star ROM Rating: Not Ready for Primetime

    0 vote(s)
    0.0%
  5. 1 Star ROM Rating: Not Usable

    1 vote(s)
    2.7%
  1. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    LOL Thanks! I was just going to post that but I hate quoting myself! :D

    I should have made a disclaimer that said...PERFORM A BACKUP first! ;)

    Always...always...always perform a backup before flashing anything (ROM, theme, kernel, etc)...it's just good practice.

    Formatting the BOOT and SYSTEM partitions is optional. NOTE: It will delete your current operating system but so will flashing a new ROM :p so there is really no reason not to IMO. It cleans out the cobwebs! LOL

    OMJ also has a nice guide listed here: http://androidforums.com/roms-droid/118513-how-install-custom-rom.html


    Edit: I went back in...put a disclaimer about backups and wrote out how to do one :) Now everyone is covered ;)
    klwheat and GirLuvsDroid like this.
  2. GirLuvsDroid

    GirLuvsDroid Well-Known Member

    Okay, I have a dumb question and I'm not even sure that it belongs in this thread. It's been a very long time since I've needed to run SetCPU, since I was allowing Pete's script to handle my ondemand CPU scaling automatically in the last ROM, which I ran for quite some time. I have SetCPU set up to autodetect device and set on boot, with 1100 max/250 min. I also have a 100% priority profile set to scale my max down to 800 if my CPU temp gets above 50C. However, every time I reboot, my max resets itself to 800, even though my CPU temp is below the 50C trigger. I tried uninstalling and reinstalling SetCPU and inputting my settings again, but every reboot, I'm back to 800 max, until I actually open SetCPU. Any ideas?
  3. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    The newer SetCPU apps are a little tricky when it comes the setting profiles. I have had to tweak mine cause certain profiles where superseding other profiles that I didn't want it to... Not sure what's going on with your. If you post a screenshot, that might help.

    Speaking of which...here's mine with may help. I have to play with the freqs when I change kernels but the Priority stays the same (along with the relative speed of each profile).

    I don't set anything to 100...maybe that is your problem ;)

    [​IMG]
    GirLuvsDroid likes this.
  4. Helenoftroy08

    Helenoftroy08 Well-Known Member

    Are the kernels available for download by themselves?
  5. GirLuvsDroid

    GirLuvsDroid Well-Known Member

    I have only one profile, which is intended to be a "fail safe" to scale back if my temp gets too high. It should only be triggered if the temp is above 50C. Nonetheless, after each boot, I'm set at 800/250, rather than 1100/250.

    [​IMG] [​IMG]
  6. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    I don't think so...and as far as I know, the 800MHz kernel that comes with the ROM was given performance enhancers and I don't think another kernel was optimized like the 800MHz one was.
  7. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    Drop the priority to something less than 100 and see if that helps. I don't know if that could be causing an issue. I haven't seen an issue with my setup but I don't see why yours wouldn't work the way you have it :confused:
  8. GirLuvsDroid

    GirLuvsDroid Well-Known Member

    And, I just realized that my Advanced settings (I had set the up threshold at 50, rather than the default 93) are going back to the default settings on reboot, as well, although I have Set on Boot checked. Very bizarre.
  9. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    I've seen issues with the SU app but not with this ROM. If worse comes to worse...you could always flash the 2.1 SU apk.
  10. GirLuvsDroid

    GirLuvsDroid Well-Known Member

    Thanks again for your help, UBR! I uninstalled and reinstalled SetCPU again, lowered my profile priority to 90% and rebooted and, voila, the settings stuck this time! :confused: :)
    UBRocked likes this.
  11. liquid0624

    liquid0624 Well-Known Member Developer

    Screenshots now posted sorry for the delay :)
  12. GirLuvsDroid

    GirLuvsDroid Well-Known Member

    A couple of additional screen shots -- my Handcent theme and the notification panel, after using colorchange.jar to change my text color.

    [​IMG] [​IMG]

    Oh, and I used Navigation on the way home from work and it worked flawlessly, just like everything else I've tried!
  13. Ebaneezor

    Ebaneezor Well-Known Member

    finally got around to takig some screen shots, enjoy :p

    nevermind, lol - they look horrible - app turned them all blueish -


    what are you all using for Screenshots?

    ok, got two shots

    Attached Files:

    mkjellgren and UBRocked like this.
  14. GirLuvsDroid

    GirLuvsDroid Well-Known Member

    I use DroCap2 (free in the Market).
    Ebaneezor likes this.
  15. zachd

    zachd Well-Known Member

    Thank you muchos gracias! I was ready to bang my head through the wall! lol
  16. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member


    NP ;)...save banging your head through a wall for a better occasion :D You can only do that so many times you know... :p
  17. Helenoftroy08

    Helenoftroy08 Well-Known Member

    Darn...oh well thx for the info!
  18. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    NP...I've been bugging him to make a 1.0GHz version...just because :)

    Maybe for 1.4??? ;);)
  19. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    I'll keep this short but I have yet to vote on this ROM. Now I have been running it for 24+ hours and here are some quick observations:

    Running at 800MHz...no lag (I mean zero lag...that's crazy to me!)

    Running at 800MHz...no lag (I know I repeated it...I think that is a big plus though!)

    40% Battery left...Been off the charger for 16 hours. I've been on the phone via web, txt, and chat all day long. Rebooted into recovery 2 or 3 times to write up quick "How To's", and then I streamed audio over 3G for 1.5 hours while I mowed the grass (I did turn the clock down to 250max - 125min while I was streaming audio...just FYI)

    3 Gorgeous themes...2 of which Liquid provided... the other (Watermark'D) he tweaked.

    KNOWN ISSUES - Facebook widget doesn't work. There is a fix coming for everyone and it is just a "theming issue"...

    I verified this - fixed it by modifying the Watermark'd Theme file. I added different Facebook.apk (from stewart1champ) to the theme file and reflashed. Something I can fix myself in two minutes...I can't be too hard on that ;)

    [​IMG]

    As with 1.2...this is a 5 in my book. There are other ROMs that I consider to be "5's" but this is the one I designate as being the fastest ROM currently available. Actual usage is just sick! :D

    Liquid...nice job Sir! :D I'm glad to see this version is getting it's due attention ;)
  20. johnlgalt

    johnlgalt Antidisestablishmentarian VIP Member

    *nudge nudge* So, who's the cutie in your FB widget? :p

    (j/k)

    I have, at current count, over 160+ installed apps (TiBu registers 251 individual .APKs it has to play with when making a full backup) so just about any ROM I choose is going to have some sort of lag.

    However, you're tempting me more and more to try this one out - if those kernel optimizations are that friggin good, I just may.

    One thing I have learned - Chevy's kernel does not like Smoked Glass. lol.
  21. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    The girl in that pic is a friend from my Air Force days when she was stationed with me in your neck of the woods. She's got a boyfriend...but I could put in a good word for you... :D

    Yeah, I'd be curious to get your take on this ROM. My TiBu screen below...and from what I have heard...I run more than most people. You almost double what I have!

    [​IMG]
  22. DERIS12

    DERIS12 Well-Known Member

    I am new to this, this was only the 3rd rom I flashed. and I am loving it. so smooth and just down right cool. thanks!
  23. UBRocked

    UBRocked VZW Nexus Please!!! VIP Member

    John, the difference between you and I is that I stop using apps after a while (41 missing apps vs your 3 LOL). That's funny! :D
  24. johnlgalt

    johnlgalt Antidisestablishmentarian VIP Member

    This is really gonna bake yer noodle.

    Those three are ROM specific apps, specifically (pun intended) from BB - since I am now on Smoked Glass for FRG22, it makes sense that those three are not currently installed:

    Missing apps.jpg

    Of course, it also helps that I have like close to 30 apps on the SDCard:

    SDCard apps #1.jpg SDCard Apps #2.jpg SDCard Apps #3.jpg
Loading...

Share This Page