Question for when the update comesSupport


Last Updated: 2011-02-18 03:49:29
  1. Scimajor

    Scimajor Member

    I successfully used the qdl tool to get 2.2 on my locked Streak. I plan, however, on using the official release when it comes in. When Dell/AT&T finally releases 2.2 for the Streak will I be able to update or do I have to downgrade back to 1.6 first?

    If I have to downgrade back to 1.6 will a simple "Restore to factory" do it or is the process more involved?

    Also, is there any point (i.e. will the released version be exactly the same)?

    Advertisement
  2. bel4_20

    bel4_20 Member

    From what I understand once you go QDL there's no going back. Is why I have not done the QDL yet myself.
  3. nb_mitch

    nb_mitch Well-Known Member

    I have been trying for a month to upgrade, and I am just missing something. I have my device rooted and have tried the QDL tool, it gets about half way through the process and fails. I don't recall everything I have done, as I have tried a dozen times.

    I rooted the device.
    I downloaded some drivers and installed them.
    I downloaded the QDL tool

    Did you go from At&t 1.6 to O2 1.6 first (that I have not done).

    A step by step would be wonderful.

    As to your questions. I would just leave it "as is", At&t version of 2.2 will probably have some bloatware and shouldn't have any improvements. Once you get to 2.2, you should be able to do upgrades directly from the dell site.

    At&t has yet to update any Android device yet, I am tried of holding my breathe. Because of their flap with Dell, I am begining to wonder if they will ever update the Streak.

    I get this:

    HW:
    Board ID:

    Comment:

    QDLTool: M 2.7.4.8, Build ID: 1.301.20101022, SW: 12-324012-AUSB1AM-09
    --
    LOG
    --
    ###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Tue Feb 15 19:57:40 2011
    Check image DBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
    Check image FSBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
    Check image OSBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
    Check image AMSS: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
    Check image DSP1: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
    Check image APPSBL: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
    Check image DT: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
    Check image boot.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
    Check image system.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
    Check image userdata.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
    Check image recovery.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
    Check image logfilter.img: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
    Check image Region: C:\Streak\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
    Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
    Check images ok
    Download in speedup way
    Open COM port success
    OSBL version: 12-324012-AUSB1AM-09
    osbl.mbn version:
    Baseband image version: M8650BAUSB1AM5035SIGN
    Check device and image is Austin
    Baseband image version: M8650BAUSB1AM5035SIGN
    Check device and image is Austin
    Open COM port success
    Check Secure Boot is enabled
    #Set Fast Boot Flag success
    Open COM port success
    Test communication success
    Check Secure Boot is enabled
    #DBL to DDR success
    #FSBL to DDR success
    #OSBL to DDR success
    #DT to DDR success
    #backup FSBL to DDR success
    Run HEX success
    ERROR[D14]: Streaming hello Failed!
    ERROR: Download fail!
    Please remove the battery and try again.
    Wait for modem set up ......
    Download Fail! - 2011/02/15 19:58:21
    Elapsed Time: 40.52 sec
  4. Scimajor

    Scimajor Member

  5. nb_mitch

    nb_mitch Well-Known Member

    I must have watched that video 100 times already :confused: I just watched it again tonight and tried 2 more times and always fail at the same point.
  6. barry99705

    barry99705 Well-Known Member

    And that point would be?
  7. nb_mitch

    nb_mitch Well-Known Member

    The point would be the video doesn't address my problem.
  8. barry99705

    barry99705 Well-Known Member

    Ummm, that's not what I meant. :rolleyes: At what point does the flashing process fail?
  9. nb_mitch

    nb_mitch Well-Known Member

    At the bottom of the post, I include the complete log. It runs for about 10 seconds, then the "Run HEX success" line appears and it freezes for about 5-10 seconds with no more output, then I get the error listed below :confused:


    #DBL to DDR success
    #FSBL to DDR success
    #OSBL to DDR success
    #DT to DDR success
    #backup FSBL to DDR success
    Run HEX success
    ERROR[D14]: Streaming hello Failed!
    ERROR: Download fail!

    Please remove the battery and try again.
    Wait for modem set up ......
    Download Fail! - 2011/02/15 19:58:21
    Elapsed Time: 40.52 sec
  10. barry99705

    barry99705 Well-Known Member

    Heh, don't know why I completely missed that... :rolleyes::eek: I put it in fastboot mode then wait a minute or two before attaching to my computer. Never had an issue that way. Also make sure both usb drivers are installed.

    QDL Tool Help

Share This Page