Simply Stunning v3.1 ESE81 Issues..


Last Updated:

  1. DatacomGuy

    DatacomGuy Well-Known Member This Topic's Starter

    Joined:
    Mar 8, 2010
    Messages:
    297
    Likes Received:
    7
    Installed this ROM in early April, and I love it and really dont want to switch..

    However, I'm having issues with random reboots, and tons of FC's.

    Using 2.6.29-lowV-omap1 kernel, I believe its the 1GHz kernel, and it is OC'd to 1GHz also with SetCPU.

    I installed the ROM from a full wipe.

    Any suggestions on how to remedy? It's done it twice this morning, and i've only been awake for not even 2 hours yet. Do I need to reinstall or install another ROM or Kernel? Will I need to wipe? I hope not :( I LOVE SS.. Would upgrading to 3.2 help?
     

    Advertisement
  2. OMJ

    OMJ Bazinga VIP Member

    Joined:
    Nov 27, 2009
    Messages:
    3,288
    Likes Received:
    825
    do you have JIT turned on? If not I would upgrade to 3.2
     
  3. DatacomGuy

    DatacomGuy Well-Known Member This Topic's Starter

    Joined:
    Mar 8, 2010
    Messages:
    297
    Likes Received:
    7
    I dont think that I do.. Where would I look?

    Should I stay with same kernel? LV 1GHz?
     
  4. DatacomGuy

    DatacomGuy Well-Known Member This Topic's Starter

    Joined:
    Mar 8, 2010
    Messages:
    297
    Likes Received:
    7
    Also, should I wipe or just upgrade?
     
  5. mcapozzi

    mcapozzi Well-Known Member

    Joined:
    Mar 17, 2010
    Messages:
    323
    Likes Received:
    35
    Before jumping into a new ROM (which isn't a BAD idea). You may want to try a lower speed kernel, or a kernel that uses a standard voltage instead of lower voltage.

    LV=Low Voltage
    SV=Standard Voltage
    IV=Increased Voltage

    Using more voltage on the CPU shouldn't drain the battery too much faster (the differences between LV, SV, and IV are probably tenths of a volt).

    Once you find the sweet spot as far as kernel, then upgrade the ROM when you're ready.

    -Mike
     
  6. DatacomGuy

    DatacomGuy Well-Known Member This Topic's Starter

    Joined:
    Mar 8, 2010
    Messages:
    297
    Likes Received:
    7
    Thanks Mike. Stupid question, do I need to wipe to install a new kernel? Or do I just load on SD, and reboot in to recovery then monitor for a day or two?
     
  7. mcapozzi

    mcapozzi Well-Known Member

    Joined:
    Mar 17, 2010
    Messages:
    323
    Likes Received:
    35
    No wipe needed, just load onto the SD, reboot into recovery, apply the zip file, reboot.

    -Mike
     
  8. DatacomGuy

    DatacomGuy Well-Known Member This Topic's Starter

    Joined:
    Mar 8, 2010
    Messages:
    297
    Likes Received:
    7
    Loaded the 1.0 MV.. We'll see how it goes. I downloaded the 1.1 MV too, might try that soon too. I went with 5 slot, since i typically only keep it 1 speed anyway.
     
  9. ChevyNo1

    ChevyNo1 Well-Known Member

    Joined:
    Feb 11, 2010
    Messages:
    77
    Likes Received:
    40
    Let me know if you still have issues ...
     
  10. DatacomGuy

    DatacomGuy Well-Known Member This Topic's Starter

    Joined:
    Mar 8, 2010
    Messages:
    297
    Likes Received:
    7
    Thus far, going much more smoothly. I've only had one or two FC's since.

    Thinking of trying the 1.1 MV next..
     

Share This Page

Loading...