What is this for...?


  1. warrior12

    warrior12 Well-Known Member Contributor

    While i was looking through the build.prop i noticed this line:

    wimax.interface=wm0

    I have heard our phone has the hardware in it, but could this be changed to wm1 to enable it?

    Advertisement
  2. dsmryder

    dsmryder Well-Known Member Developer

    You might want to hunt down chairshot. He knows more about the build.prop lines than anybody I know.
  3. lfritz3215

    lfritz3215 Member

    You could always try changing it, as long as you know what you're doing, but honestly I've never heard of our phone having the reciever for the 2500 mhz band that is "WiMax." I'll be watching for the results if you do change it. :D
  4. warrior12

    warrior12 Well-Known Member Contributor

    Alright. Just sent him a PM. Ill see what he says. I saw it and remembered hearing that our phone has the hardware but its just not being used or something.
  5. rdoac

    rdoac Well-Known Member

    I don't think it's a toggle. I suspect it's a pointer to an interface. In linux, the first interface to a type is 0, ie, eth0 for first ethernet card, eth1 for second. Or wifi0, wifi1 etc.

    I suspect it's a generic line which says, if we have wimax you'll find it on wm0.
  6. warrior12

    warrior12 Well-Known Member Contributor

    Its kinda hard for me to test it as im on the outside of a service area to begin with and i dont get wimax here? Could somebody else who gets wimax in their area for sure try it too? Ill change it and watch what happens.


    Edit: rdoac was right. Its just a pointer for an interface. The wlan also has the letters then 0 indicating its the first one. Im currently looking through wimax phones' build props to find lines regarding the wimax.
  7. warrior12

    warrior12 Well-Known Member Contributor

    Ok so i found this. Only thing so far.got it from a different phone.


    #device supports LTE
    ro.config.lte=true
    #device supports EHRPD
    #ro.config.ehrpd=true
    #device supports simultaneous 1x voice + LTE
    ro.config.svlte1x=true

    Could the lte be changed to wimax? Just a thought. Im still searching though. If you guys can get build.prop from wimax phones it would help a lot.
  8. qu4ttro

    qu4ttro Well-Known Member

    I'm pretty sure there is no WiMax hardware in the Triumph, since it is a rebadged Huawei that was originally made for another region. Anyway, I've pulled the build.prop from my Virgin Evo V which does have WiMax. I did a quick skim and nothing jumped out at me, but here's the whole thing for you guys to look for yourself:

    ro.ril.oem.ecclist=911
    ro.ril.set.mtusize=1472
    ro.com.google.clientidbase=android-htc
    ro.com.google.clientidbase.yt=android-virgin-us
    ro.com.google.clientidbase.am=android-virgin-us
    ro.com.google.clientidbase.gmm=android-htc
    ro.com.google.clientidbase.ms=android-virgin-us
    ro.bt.tetheringUI=0
    ro.usb.tetheringUI=0
    ro.product.brand=virgin_mobile
    ro.product.model=HTCEVOV4G
    ro.cdma.home.operator.alpha=Virgin Mobile
    gsm.sim.operator.alpha=Virgin Mobile
    gsm.operator.alpha=Virgin Mobile
    ro.cdma.home.operator.numeric=311490
    gsm.sim.operator.numeric=311490
    gsm.operator.numeric=311490
    gsm.sim.operator.iso-country=us
    gsm.operator.iso-country=us
    ro.da1.enable=true
    persist.radio.voice.dom.roam=0
    # begin build properties
    # autogenerated by buildinfo.sh
    ro.aa.customizationid=363616
    ro.aa.project=Shooter_ICS_35_S
    ro.aa.romver=1.13.652.2
    ro.aa.maincid=SPCS_002
    ro.aa.cidlist=SPCS_002
    ro.aa.rid=87
    ro.aa.modelid=PG8610000
    ro.build.display.id=1.13.652.2 710RD
    ro.aa.skulist=652
    ro.aa.taskid=259760
    ro.aa.mainsku=652
    ro.cwkey=SPCS_002
    ro.com.google.clientidbase=android-htc
    ro.build.id=IML74K
    ro.build.display.id=IML74K
    ro.build.version.incremental=372137.2
    ro.build.version.sdk=15
    ro.build.version.codename=REL
    ro.build.version.release=4.0.3
    ro.build.date=四 5月 3 22:08:29 CST 2012
    ro.build.date.utc=1336054109
    ro.build.type=user
    ro.build.user=
    ro.build.host=ABM011
    ro.build.tags=release-keys
    ro.product.model=PG86100
    ro.product.brand=virgin_mobile
    ro.product.name=htc_shooter
    ro.product.device=shooter
    ro.product.board=shooter
    ro.product.cpu.abi=armeabi-v7a
    ro.product.cpu.abi2=armeabi
    ro.product.manufacturer=HTC
    ro.product.locale.language=hdpi
    ro.wifi.channels=
    ro.board.platform=msm8660
    # ro.build.product is obsolete; use ro.product.device
    ro.build.product=shooter
    # Do not try to parse ro.build.description or .fingerprint
    ro.build.description=1.13.652.2 CL372137 release-keys
    ro.build.description=1.13.652.2 CL372137 release-keys
    ro.build.changelist=372137
    ro.build.fingerprint=virgin_mobile/htc_shooter/shooter:4.0.3/IML74K/372137.2:user/release-keys
    ro.build.characteristics=default
    ro.build.project=Shooter_ICS_35_S:259760
    ro.product.version=1.13.652.2 710RD
    ro.build.languageremove=0
    ro.build.sense.version=3.5
    keyguard.no_require_sim=1
    # end build properties
    #
    # system.prop for shooter
    #

    ro.sf.lcd_density=240

    sf.debug.enable3D = 1
    debug.fb.rgb565 = 0

    debug.sf.hw = 1
    debug.composition.type = c2d
    debug.enabletr = true
    debug.qctwa.preservebuf = 1

    rild.libpath=/system/lib/libhtc_ril.so

    # Default network type.
    # 4 => CDMA mode preferred.
    ro.telephony.default_network=4

    #
    # system props for the data modules
    #
    ro.use_data_netmgrd=true
    persist.data_netmgrd_nint=8
    persist.data_netmgrd_mtu=1472
    #

    wifi.interface=wlan0
    wifi.supplicant_scan_interval=15

    # The OpenGL ES API level that is natively supported by this device.
    # This is a 16.16 fixed point number
    ro.opengles.version = 131072

    # This is a high density device with more memory, so larger vm heaps for it.
    # Change to 32m, due to 2.3.3 GB already change to 32m
    # For ICS project, default 32m/48m
    dalvik.vm.heapsize=128m
    dalvik.vm.heapgrowthlimit=48m

    # For the default value of agps
    ro.ril.def.agps.mode = 2

    # For emmc phone storage
    ro.phone_storage = 0
    # For ext4 file system
    ro.ext4fs = 1

    # For FOTA setting (leave empty value to use default)
    ro.htc.checkin.url = http://andchin.htc.com/android/checkin
    ro.htc.checkin.crashurl = http://andchin.htc.com/android/crash
    ro.htc.checkin.url_CN = http://andchin.htccomm.com.cn/android/checkin
    ro.htc.checkin.crashurl_CN = http://andchin.htccomm.com.cn/android/crash
    ro.htc.checkin.exmsg.url = http://fotamsg.htc.com/android/extra/
    ro.htc.checkin.exmsg.url_CN = http://fotamsg.htccomm.com.cn/android/extra/
    ro.htc.appupdate.url = http://apu-chin.htc.com/check-in/rws/and-app/update
    ro.htc.appupdate.url_CN = http://apu-chin.htccomm.com.cn/check-in/rws/and-app/update
    ro.htc.appupdate.exmsg.url = http://apu-msg.htc.com/extra-msg/rws/and-app/msg
    ro.htc.appupdate.exmsg.url_CN = http://apu-msg.htccomm.com.cn/extra-msg/rws/and-app/msg

    # release Bluetooth HW/SW information
    ro.bt.chipset= Broadcom BCM4329-B1
    ro.bt.stack= Broadcom BTL-A
    ro.bt.stack.version= 2.0.50.032
    #0x10000010010100101000011 represent bt profile list
    ro.bt.profiles= 4270403

    # Properties of BTLA stack
    service.brcm.bt.activation = 0
    service.brcm.bt.srv_active = 0
    service.brcm.bt.hcid_active = 0
    service.brcm.bt.btld = 0
    service.brcm.bt.btld_pid = 0
    service.brcm.bt.avrcp_pass_thru = 0
    service.brcm.bt.avrcp_toggle = 1
    service.brcm.bt.local_name =

    #Welly_Fang
    ro.htc.device.slot1 = NV

    # Following property will be reference by Settings.
    ro.product.processor = 1.2 GHz dual core
    ro.product.ram = 1GB
    ro.product.display_resolution = 4.3 inch qHD resolution
    ro.product.main_camera = 5M * 2
    ro.product.front_camera = 1.3M
    ro.product.bluetooth = 3.0
    ro.product.wifi = 802.11 b/g/n

    # For opensense sdk
    ro.htc.common.version = 3.0.0.0

    # Properties for supporting framework features
    ro.htc.framework.screencapture = true

    # For QC perf binary hooks
    # src:vendor/qcom/proprietary/android-perf/release/lib/<CPU arch>/libqc-opt.so
    ro.vendor.extension_library=/system/lib/libqc-opt.so

    #
    # ADDITIONAL_BUILD_PROPERTIES
    #
    ro.setupwizard.mode=OPTIONAL
    ro.config.ringtone=QuietlyBrilliant.mp3
    ro.config.notification_sound=Zeta.mp3
    ro.config.alarm_alert=NewDay.mp3
    ro.config.cal_notification=Epsilon.mp3
    ro.config.msg_notification=Gamma.mp3
    drm.service.enabled=true
    ro.com.google.gmsversion=4.0_r2
    media.a1026.nsForVoiceRec=0
    htc.audio.alt.enable=1
    htc.audio.hac.enable=1
    lpa.decode=true
    lpa.use-stagefright=true
    htc.audio.q6.topology=0
    ro.setupwizard.enterprise_mode=1
    dalvik.vm.dexopt-flags=m=y
    net.bt.name=Android
    dalvik.vm.stack-trace-file=/data/anr/traces.txt
  9. warrior12

    warrior12 Well-Known Member Contributor

    Well, if the triumph has no WiMax hardware in it, then why would it have an indicator in the build.prop? Thanks for the build.prop though.

Share This Page