Go Back   Android Forums > Android Tablets & MIDs > WonderMedia WM8650 > WM8650 - All Things Root

test: Reply
 
LinkBack Thread Tools
Old January 29th, 2012, 09:39 PM   #51 (permalink)
New Member
 
Join Date: Jan 2012
Posts: 3
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

So I was not satisfied with accepting this was dead. After a few on and off cycles with and without SD trying to see if there wasa glimmer of hope, I noticed that it seemed that an on and quickly after an off, it turned right off. If I waited, then you had to hold the power button. This told me that it was starting up but not displaying so i played.

As this is a 10" unit I tried 22 which is a <test> version and WTF, it actually upgrades. But then only gets to the Uberoid title like someone stated above.

I tried differnet versions, targeting the 10" and nothing else gave me similar results or better.

Any ideas?

Quote:
Originally Posted by icoultha View Post
Mine is basically a brick now despite following the directions at the top exactly. Saw the Android guy pop up and then went away, no progress bar, nothing. Left for a while
and zip. Any ideas?

When it worked, about reports:
WonderMedia WM8650 (but it's a 10" iPad looking version)
Android version 2.2
Kernel version 2.6.32.9-default
Build number generic-eng2.2 Froyo Ver1.5.5-20110920.043830

Is listed as a MID U102.

Advertisements
icoultha is offline  
Reply With Quote
sponsored links
Old January 31st, 2012, 08:23 AM   #52 (permalink)
New Member
 
Join Date: Jan 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 1
Thanked 0 Times in 0 Posts
Default

Thanks for this fix. Everything works great except for my sound. Is there anyway to get the sound to wrk? #13 worked for me. If anyone knows a fix for the sound to work, please let me know
mrsylk69 is offline  
Reply With Quote
Old February 2nd, 2012, 09:20 PM   #53 (permalink)
New Member
 
Join Date: Feb 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 1
Thanked 0 Times in 0 Posts
Default

THANK YOU VERY MUCH ! Though I had bricked my daughter's wm8650 7in from china. BUT, tried your software a few times. Lost touch panel control as mentioned by a few, but then tried number 30 and it worked (with minimal wi-fi). Then 28 worked perfectly.

THANK YOU
y2kcortez is offline  
Reply With Quote
Old February 13th, 2012, 08:54 PM   #54 (permalink)
New Member
 
Join Date: May 2011
Posts: 8
 
Device(s):
Carrier: Not Provided

Thanks: 2
Thanked 1 Time in 1 Post
Wink

Quote:
Originally Posted by icoultha View Post
Mine is basically a brick now despite following the directions at the top exactly. Saw the Android guy pop up and then went away, no progress bar, nothing. Left for a while
and zip. Any ideas?

When it worked, about reports:
WonderMedia WM8650 (but it's a 10" iPad looking version)
Android version 2.2
Kernel version 2.6.32.9-default
Build number generic-eng2.2 Froyo Ver1.5.5-20110920.043830

Is listed as a MID U102.
Try options 10, 47, 48, and 49. They match your specs the closest. Use the latest Uberoid version V11. And make sure you select only the 10" pad options from the changer.bat list, such as those listed above.
paskuniag is offline  
Reply With Quote
Old February 15th, 2012, 11:13 PM   #55 (permalink)
New Member
 
Join Date: Feb 2012
Posts: 3
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

hi
welin02 is offline  
Reply With Quote
Old February 15th, 2012, 11:13 PM   #56 (permalink)
New Member
 
Join Date: Feb 2012
Posts: 3
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi everyone,

Below is my tablet I would like to mod...I followed the instructions but the touchscreen is not working at all. Pls advise which options will work with my tablet. Thanks alot.

For instance, if you have a 7 inch tablet, try only options
1,2,7,8,9,11,12,13,16,20,21,23,25,26,27,28,29,30,3 1, and 32.

7' WM8650 Sim Card Phone Call Wifi 3g MultiTouch MID Tablet PC + FREE .. (Kuala Lumpur, end time 10/9/2012 10:15:00 PM MYT)
7 inch WonderMedia (WM8650, 800Mhz) Original Rooted Android 2.2 MID Tablet PC
With Real Original Android Market.
  • NEW Design netPad W1 with Real Android 2.2 froyo
  • GSM Phone Voice Call + SMS Function
  • Lastest version with suppot GPRS data online
  • 4GB Version 256MB DDR3 RAM
  • WonderMedia WM8650, Dual Core 800 Mhz
  • Come with latest and stable Officail WonderMedia firmware 1.5.5 (latest firmware, others is slow firmware 1.5.2).
    • We give Original Official Firmware with Real Android market ready. Those which come with china APP market only need to use modified firmware to get Android market.
  • Support Flash 10.1
  • Support Real Google Android Market (Note: Others might only have app market or others china market)
  • Rooted Android Version (Installed superuser rights, titanium backup, root explorer)
  • Working OTG (You can Link/Connect your Tab to your PC)
  • Camera
  • Different Type of TouchScreen
    Most sensitive Resistive screen with 2 finger Multi touch pinch zoom
  • Using INNOLUX Branded LCD (more quality and clear in color)
  • Direct USB PORT, NO need addtional usb adapter. (others model need usb adapter)
  • Support 3G Broadband Modem
  • Support RMVB Movie/Video
  • Grade A Quality Battery
  • Support Wifi / Wireless a/b/g/N
  • G-sensor - Gravity 4-Dimensional
welin02 is offline  
Reply With Quote
Old February 16th, 2012, 01:07 AM   #57 (permalink)
New Member
 
Join Date: Feb 2012
Posts: 3
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

I found it!!! Mine is option 7... Don't worry if the touchscreen is out of sync. Use a usb mouse to select first... then go setting and select touchscreen calibration ...that's it
welin02 is offline  
Reply With Quote
Old February 20th, 2012, 03:20 PM   #58 (permalink)
New Member
 
Join Date: Feb 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Dude, this dont works on my Tablet M009f Via WM8650 7". So,i chose every options! may this dont works becaus i have android 2.3.3? or because is non rooted tablet? i dont know, i need a little help.

thnks
LucaSurf is offline  
Reply With Quote
Old February 21st, 2012, 08:26 AM   #59 (permalink)
New Member
 
Join Date: Feb 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Confused Did you attempt this mod as yet?

Quote:
Originally Posted by Arraart View Post
Hi, I am new to this forum and also to this device, I got it during Christmass and I am upset that it is kinda slow and that market does not work. So I am really glad, that I have found this threat.

I would like to make this flashing/rooting/uprading of my device but I am scared doing it due to some reponses in which people describe that their device stopped working after this acction.

My device specs are:
Model Number : WonderMedia WM8650
Android Version : 2.2
Kernel Version : 2.6.32.9-default
Build Number : generic-eng2.2 Froyo Ver1.5.5-20110920.103830

So I would like to know, If someone with same or simmiliar device done this action with succes and if you had probloms.

Arraart
Did you get yours to work?? im about to try
jaandroidz is offline  
Reply With Quote
Old February 25th, 2012, 01:30 PM   #60 (permalink)
New Member
 
Join Date: Feb 2012
Location: London, UK
Posts: 1
 
Device(s): WM8650
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

thanks. third try lucky! option 8 worked for me.
fredabeeder is offline  
Reply With Quote
sponsored links
Old March 10th, 2012, 05:28 AM   #61 (permalink)
New Member
 
Join Date: Mar 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Here in Finland 27 worked for me, the device is 99Ä Evix T1 from HalpaHalli. When I bought this device it was horribly slow but now with Uberoid it sure rocks. Only problem now seems to be poor WiFi connectivity and I am now looking for a proper solution for that.

Another thing some people reported is the malfunctioning touch screen while the device is being charged. I can verify that and my solution was to switch using other decent charger. Seems like the device is picking up a lot of noise from original charger.
Hecxa is offline  
Reply With Quote
Old March 18th, 2012, 11:55 PM   #62 (permalink)
New Member
 
Join Date: Mar 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

mine gone blank, white with black streaks, after using option 27 and later tried others but same condition. its WM860 LAVA LT7007 green LED 7". Can anyone?
FahimR is offline  
Last edited by FahimR; March 23rd, 2012 at 09:16 AM.
Reply With Quote
Old March 21st, 2012, 02:22 PM   #63 (permalink)
New Member
 
Join Date: Mar 2012
Posts: 2
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by NyRaised View Post




Want to make your tablet run better, faster and get the REAL ANDROID MARKET?

I have done many of these tablets and. I have enclosed my instructions below
and the link to the files from my website.

Follow these directions exactly:

Make sure your tablet is off.
Remove the SD Card.
Download the V9 Final ROM file to your PC from my site. Make sure you know
where to find it after it downloads:

I have uploaded the rom to my own website and it should
download very quick for you. Here is the link to the ROM from my site
http://creativeconceptcomputers.com//downloads/public/WM8650.7z

save it to your desktop and get winrar to unpack the zip file at
http://rarlab.com/rar/wrar41b4.exe

Insert the SD Card into the media reader on your desktop PC.
The SD Card will now show up as a drive letter on your PC's File Manager,
just like C:\ except with a different letter assigned.

Every computer will be different. Let's just say that on your PC it is G:\.
Right click the drive letter of the SD Card (G:\). A pop-up menu appears.
Select "format" and format the card to Fat32.
Now, using a program like winzip or winrar, extract the ROM file that you
downloaded to your PC earlier to a new folder on your desktop
.
After it has extracted, it will have these folders:
firmwareinstall
Changer_files
and these 3 files on it:
changer.bat
wmt_scriptcmd
Universal_Uberoid_WM8650_v9.1.2.txt

Using your PC mouse, double click the "changer.bat" file. A pop up screen
appears.
Type in RT3070 and hit "enter" (this enables WiFi support)

Select the option number that corresponds to your tablet and press enter.
( I found option 27 to work on most wundermedia wm8650 ) if that dont work
run it again and choose option 2 (if that dont work,keep trying differnt
options until you get the right one) if that one hangs on the option
you selected, you will just have to keep running the changer and selecting a
different option number until you get it right. Make sure that after it does
boot that the touchsreen does in fact work.

(Please, if you are trying multiple options, just remember to try options
only for the size tablet you have.
For instance, if you have a 7 inch tablet, try only options
1,2,7,8,9,11,12,13,16,20,21,23,25,26,27,28,29,30,3 1, and 32.

After you select your option number and hit enter, the changer.bat will ask
you if you want to install the ROM on your SD Card hit y (yes) and if you
want your SD Card formatted. Answer "NO" since you already formatted it
earlier, let the program finish running completly and it will tell you when
its done.
Now safely remove the SD Card from the PC media reader.

Insert the SD Card back into your tablet and turn it on.

it will show a progress bar on the botton, when it's done it will tell you
to remove the sd card , (don't remove card until it says to) when you do
the tablet will reboot
.
Select the wmtlauncher when it comes to options screen and set as the
default and thats all there is to it.

This should only take a few minutes to boot the first time. Make sure that
after the tablet is up and running , that you reformat the sd card in a
computer again before you put it back in your tablet for storage.

Main features:
* Live Wallpaper Support! ("butterfly" live wallpaper included!)
* HoneyComb styled launcher, framework and icons
* Extreme WM8650 compatibility (60 models +!)
* Customizable ROM, make it even more LITE for example (see CHANGER 'x' for
more info)
* 100% Rooted
* Audio Boosted
* Memory cleaning boosted
* Memory read/write boosted
* Lite version, stripped away many apps
* Tries to support as many languages as possible
* Real Android Market
* Real working YouTube
after download the file from your link and succesfully extracted the file, i did not get the change.bat file, instead i got change.sh , pls help, i am using window 7 home premium on my laptop
luckyme is offline  
Reply With Quote
Old March 26th, 2012, 07:24 AM   #64 (permalink)
New Member
 
Join Date: Mar 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by hddroid View Post
Please help my touchpanel is still off see my previous quotes i have my tab's detaills and a snap please please
try option nr.8 in change.bat
gaborbig is offline  
Reply With Quote
Old March 27th, 2012, 02:31 PM   #65 (permalink)
New Member
 
Join Date: Mar 2012
Posts: 2
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

I'm having some serious trouble. When I use change.bat to copy the files to the Micro SD card, it will not boot; the tablet starts up normally and ignores the SD card.

Info:
Memory Size: 256MB
Model number: generic
Firmware Version: 1.6
Kernel Version: 2.6.29-00236-g4f8dbbb-dirty
Build number: WMT2.1.2_105

It has 2GB of internal storage (1.86GB shows, the rest is system used)

(I know very little about this tablet. Just came to the conclusion that it is the WM8650. Not sure which one. User manual says MID, and that is it.)






Many thanks in advance for any advice. D:
I just cannot get this thing to catch! It is supposed to hang up on the initial android logo before it actually starts booting if it's the wrong ROM, not completely ignore it; right?

I've tried formatting it as Fat32 in both Vista and through change.bat
fixius is offline  
Reply With Quote
Old March 28th, 2012, 02:21 AM   #66 (permalink)
New Member
 
Join Date: Mar 2012
Location: Serbia
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 1
Thanked 0 Times in 0 Posts
Default It works!

Thanx NyRaised!

My WM8650 Wondermedia 7 inch is alive again !

I tried to install your ROM (after RT3070), with several different options (some of them didnít boot, some had issues with touch commands - for instance touch didnít work or it was useless because of inappropriate resolution that was predicted). Finally, #2 made complete success.

This ROM works much better then original, there are a lot of excellent new features, such are:

1. Good Market (uncountable number of new apps),
2. Better power management (it seems that battery lasts longer),
3. Real YouTube,
4. Louder sound and proper sound on board controls (originally, left button was used to turn the volume up, and right to turn the volume down),
5. Nice fresh look.

Once again, Thanx NyRaised!
mtesic is offline  
Reply With Quote
Old April 2nd, 2012, 09:22 AM   #67 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi all

I have MID 7 inch touch screen Specification Sort Item Description System CPU VIA 8650( 800MHZ) Operation System: Android 2.2 RAM Hyunda 256MB DDR...brought on amazon jan 2012

I have tryed options 1,2,11,27,29,30... so far and none have worked i just tryed option 8 and it worked but the battery keeps saying 100% and doesnt go dwn...

Help needed

Thank you
sc0rpulus is offline  
Reply With Quote
Old April 7th, 2012, 01:32 PM   #68 (permalink)
New Member
 
Join Date: Feb 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default You are a genius

I couldn't believe the difference you have made already. The very first attempt worked like a dream. The WiFi connection happened so much more quickly, the touch screen is more responsive, I am astounded.

Thank you for sharing that.

db
dhbtoo is offline  
Reply With Quote
Old April 9th, 2012, 12:26 AM   #69 (permalink)
New Member
 
Join Date: Apr 2012
Location: Greece
Posts: 4
 
Device(s): WonderMedia WM8650,ZTE Racer
Carrier: Not Provided

Thanks: 1
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by devizes18193 View Post
works great expect no sound unless i plug headpones in any ideas
Did you found any clue on the sound issue? I've been trying different options,still can't get sound on the speakers,only the headphones
madprofessorus is offline  
Reply With Quote
Old April 11th, 2012, 02:45 AM   #70 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Some time ago i bought MID tablet (same as @fixius user, model no: m799ca V2.2) and prepare sd card as in instruction by @Trickyd71 (Flashing M7206-M799ca) and when i insert SD card into tablet and turn it on it says Booting from SD........ and that's it, nothing happen more. When i remove it will boot Android as normal.

Thanks in advance.
asgaard is offline  
Reply With Quote
sponsored links
Old April 11th, 2012, 01:17 PM   #71 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 2
 
Device(s): 7" Inch Android 2.2 Phone Call 4GB GSM850/900/1800/1900 SIM WiFi 3G Tablet PC
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
ddebowska@gmail.com
Default

How To Mod your WM8650 Tablet !!! I have a tablet with a phone in it, after the update can i still use the phone on this unit.... no one has made any comments about the phone side of this table.. dose anyone know... Thank you.
ddebowska is offline  
Reply With Quote
Old April 11th, 2012, 01:23 PM   #72 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 2
 
Device(s): 7" Inch Android 2.2 Phone Call 4GB GSM850/900/1800/1900 SIM WiFi 3G Tablet PC
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
ddebowska@gmail.com
Default

Dose anyone know the best way to open the tablet... I have to replace the display. my cat had kicked it of of the table.. I have the parts for the unit... I just dont want to mess it up any more.. thank you
ddebowska is offline  
Reply With Quote
Old April 14th, 2012, 08:49 PM   #73 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

when it upgrading it has no loading bar at the bottom
Anbu16 is offline  
Reply With Quote
Old April 17th, 2012, 01:43 PM   #74 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 4
 
Device(s):
Carrier: Not Provided

Thanks: 3
Thanked 0 Times in 0 Posts
Default

Fantastic OP, tried 27 first then 1 worked for my wondermedia 8650. Much more efficient and the real market is sweet.

Thanks again
Jeff
JeffG1 is offline  
Reply With Quote
Old April 18th, 2012, 07:33 PM   #75 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 2
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Testing...
romeomarco09 is offline  
Last edited by romeomarco09; April 18th, 2012 at 07:39 PM.
Reply With Quote
Old April 18th, 2012, 07:37 PM   #76 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 2
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

!!!!Tried 27 working except camera.. everytime i use camera my tablet goes hang!!! please help me! MID 7" wm8650 yellow light, red when charging.
romeomarco09 is offline  
Reply With Quote
Old April 24th, 2012, 08:42 PM   #77 (permalink)
Junior Member
 
Join Date: Dec 2010
Location: Wilmington, NC
Posts: 28
 
Device(s): Sprint HTC Hero AOSP 2.3.3
Carrier: Not Provided

Thanks: 8
Thanked 4 Times in 3 Posts
Default

Before I try this, anyone know which option works for the Mid M806S tablet?
jasonofx is offline  
Reply With Quote
Old April 25th, 2012, 03:57 PM   #78 (permalink)
New Member
 
Join Date: Apr 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default Please help

Hello I am new on the site and I wanted to know if my tablet was compatible for this stake has in the daytime because I would like to have the possibility of using Skype, it is possible?

My device specs are:
Model Number: WonderMedia WM8650 7 "
Android Version: 2.2 Kernel
Version: 2.6.32.9-default
Build Number: generic-eng2.2froyo ver1.5.5-20110920.103830
Bought in Hong-Kong
There is a green light and it becomes red when the tablet loads.
There isn't vibration to the start of this.

Sorry for my bad english :/ I'm french.

Thank you for this work.
Djoey72 is offline  
Last edited by Djoey72; April 25th, 2012 at 04:04 PM.
Reply With Quote
Old May 2nd, 2012, 02:41 PM   #79 (permalink)
New Member
 
Join Date: May 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi all, I recently got a Kyoto M7000a however the device name in settings shows that it is a WM8650, so presume it is a rebrand model.

Any idea what number I need to choose in bat.changer?

I've tried all of the 7" ROMS I'm 99% sure but none of them work
derryt is offline  
Reply With Quote
Old May 6th, 2012, 08:45 PM   #80 (permalink)
Junior Member
 
Join Date: Nov 2010
Posts: 17
 
Device(s):
Carrier: Not Provided

Thanks: 24
Thanked 3 Times in 3 Posts
Default

Hey all, the download link gives me a 404 error. Does anyone have a working link to the file?

Edit: Nevermind, Google is my friend
JeremySS is offline  
Last edited by JeremySS; May 7th, 2012 at 08:45 AM.
Reply With Quote
sponsored links
Old May 15th, 2012, 12:16 PM   #81 (permalink)
New Member
 
Join Date: May 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

hiya having similar problems my wm8650 running on android 2.2 has decided to stop booting i have not used it for a while so have been charging it all day the lights are on suggesting it is charging but it just flashes the android symbol then goes blank again i have tried to do what the first post suggests but am unable to download the file as i get a message telling me there is an error when i try to go to the site please help i need my epad for work

csckay is offline  
Reply With Quote
Old June 2nd, 2012, 09:37 PM   #82 (permalink)
New Member
 
Join Date: Jun 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

I cannot get the file to download can anyone help me with this? Can someone e-mail it to me? I want to get this thing to actually work
jeremykid is offline  
Reply With Quote
Old June 4th, 2012, 05:30 PM   #83 (permalink)
New Member
 
Join Date: Jun 2012
Location: Washington
Posts: 1
 
Device(s): WonderMedia WM8650
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Cry Also need a new link...

I'm also getting a 404 error trying to download using the link. Can someone post an updated link??
dbutch is offline  
Reply With Quote
Old June 6th, 2012, 12:05 AM   #84 (permalink)
New Member
 
Join Date: Jun 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

ok, i have tried everything i can think of with that download link. All i get is a 404 error. I have tried opening in FF as well as IE, i cant get it to download, what am i missing?
Herophantom is offline  
Reply With Quote
Old June 11th, 2012, 11:31 AM   #85 (permalink)
New Member
 
Join Date: Jun 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

will this work with epad?
Build number:jsa m-702 Froyo v1.2.3-20110414.152957

its got a blue light, size 7"
netty2012 is offline  
Reply With Quote
Old June 12th, 2012, 04:17 PM   #86 (permalink)
Senior Member
 
Join Date: Mar 2010
Location: Belgium
Gender: Male
Posts: 968
 
Device(s): Nexus One, Nexus 7
Carrier: Mobile Vikings

Thanks: 40
Thanked 93 Times in 84 Posts
Default

The link
Universal.WM8650.Uberoid.v11.[TechKnowForum.net].7z
The list of known models
Code:
1=MID V7 7"
1=Fview NL Intertoys 7"
1=MID E18 7"
1=M009S Green LED 7"
1=TomTec Tablet 7"
2=M009S Blue LED 7"
2=iBAK-784 7"
2=Polaroid MPC700G 7"
2=Epad GW-70 7"
2=Bluetech PWS700HV 7"
2=MIDV7 Blue LED 7"
2=WinPad-C07 7"
2=Ceavis 7"
3=M003S (vt1603ts) 8"
3=Innovatek MID 8"
4=PC-802 8"            
5=BLY-806 8"
5=VIA WM8650 8"
6=M80003W 8"
6=M806B 8"
6=MID M80006 8"
7=Apex 7"
7=BLY-706F v1 7"
7=M706S 7"
7=Kingcom Joypad 72 7"
7=Kingcom Joypad 73 7"
7=I-INN Kirk M77V 7"
7=APAD (MID) 7002 7"
7=Netbook X6-7V
7=iDea USA IUMID-0071 7"
8=Maylong M-250 7"
8=MID703 7"
8=Netbook WM8650 7"            
8=V7 MID 7"
8=ILC PC Tab701 7"
8=KLD-MID701 7"
8=M709W 7"
8=Scipad 7"
8=MID710 7"
8=CE037B 7"
8=Promedia Netbook Kids 7" *
8=PO7466 7" Netbook *
8=Imos A702 7" Netbook *
8=Netpad 11 7"
8=Maipad 7"
9=Tabtech 7"
9=M010S 7"
9=FlashTab 7"
9=Xiron 7"
9=TomTec 7"
10=M80003W v1.5.x 8"
10=M012S 8"             
11=M70007T 7"
11=ViaPad M7 7"
11=VIA WM8650 7"
11=M768A 7"
11=Leader V70 7"
11=Epad GW-707 7"
12=ATF3416-7 7"         
12=NeoPad8650 7"
13=BLY-706F v3 7"
13=NETPAD 11 7"
13=Zixoon Z78 7"
14=E16 5cun1603 5"
15=ED99 8cun1603 8"     
15=MID 806 8"
15=M806S 8"
15=L.Ausa W8 8"
15=I-INN SPOCK M87V 8"
15=BLY-806 8"
15=PC-802 DT 8"
15=Kingcom Joypad 81
16=E18 7cun1603 7"
17=ED99 8cun8900 8"     
18=Ricatech RATAB 10"
18=TomTec 10"
18=NetBook WM8650 10"
18=Dmedia ATF3417 4G 10"
19=M013s 10"
19=Prixton 1001 10"
20=ePad M009D 7"
20=MID A713 7"
20=Intreeo MID-WL7 7"
21=ZX07D 7"
22=M008s 9.7"
23=E18_7cun1603DT152 7"
24=E88_97cun1603153 10"
25=IMITO Im7 1.5.1 7"
26=puzhi_7inch_vt1609_ts 7"
27=M01B 1.5.3 7"
27=Pad IMO Tab X3 7"
27=Evang TP-7001 7"
28=TP_puzhi_7inch_vt1609_ts_152 7"
29=M009plus 1.5.1 7"
30=M009SBDT 1.5.3 7"
30=M003F 7"
30=SKU10374 7"
31=M731123 7"
32=SV27C151 7"
33=CEM8650701 7"
34=CEM8650702 7"
35=CEM8650801 8"
36=CEM8650971 9.7"
37=CEM8650972 9.7"
38=E10 7" Phone
38=IMO Z3 7" Phone
39=aPad 2 9.7"
39=J355 9.7"
40=JSA8inch_std_vt1609 8"
40=WP-800 8"
41=8inch_vt1603 8"
41=DCPAD1398 8"
41=Atai 8650 8"
42=8inch_vt1609_ts 8"
42=Wintouch C08 8"
42=Winpad C-08 8"
43=SV28B 8"
44=M788P 153 7" Phone
44=wms8153_7inch_2g 7"
45=Szstzl 7A-1 7"
46=Szstzl 7A 7"
47=jinghan_10inch_lvds1603_wifibtn 10"
48=M013S_VT1603 10.1"
48=puzhi_10.1inch_vt1603_0308 10.1"
49=M013S_VT1609 10.1"
49=puzhi_10.1inch_vt1609_ts_0308 10.1"
50=Szstzl SV27D 151 7"
50=wms8153_7inch 7"
51=Portablet 4.3"
52=m008s_vt1603_151 9.7"
53=m008s_vt1603_155 9.7"
54=EZDY 9.7"
54=iPAD 2 9.7"
55=M003S (vt1609ts) 8"
56=eMatic eGlide2 7"
56=M731GA 7"
57=M731GF 7"
58=Sungale_Cyberus_ID702WTA_722 7"
58=Polaroid M800 7"
59=M009G 7"
60=MyMIDPAD M706 7"
60=M706B 7"
61=MyMIDPAD M709 7"
61=M709W 7"
62=MyMIDPAD M806 8"
63=TOMTOP C1212 7"
64=USB-TEK M7001 7"
65=ZX07d 155 1603 7"
66=ZX07d 155 1609 7"
67=BLY706Fv4 7"
68=Sungale_Cyberus_ID702WTA_722 sound fix 7"
69=puzhi_7inch_vt1609_ts sound fix version by XJOKERX 7"
70=BLY403_4.3inch_priv_yzx_a 4.3"
71=BLY403_4.3inch_priv_yzx_b 4.3"
72=PocketDroid_E403 4.3"
73=PC-802B (ts and sound fix version by DJ_BAZS) 8"
74=722_priv_jiutian_vt1609 7"
75=iJoyGalatea 7"
76=JBLITBOX8 8"
77=Lanyu806 8"
78=ZTAG_ZGTB007 7"
79=X6-7V_7_Netbook 7"
80=JBLITBOX8_TS 8"
81=Polaroid mpc700gpr001
82=JM Bruneau 7"
82=PI 6040H MID00-VB 7"
83=Bluetech MM977 7"
84=Bluetech MPCA622BT001 7"
85=Bluetech MPCPW43BT001 8"
85=MID800SPR001 8"
86=CONNEX Tablette CX 7"
86=MPCM700CX001 7"
87=MAYLONG M250 v2 7"
88=Polaroid_mpcw43bt001 4.3"
89=VDTECH 7"
89=mpc700gvd001 7"
Teknologic is offline  
Reply With Quote
Old June 22nd, 2012, 06:56 AM   #87 (permalink)
New Member
 
Join Date: Jun 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default Using a mac

Is there any way I can do this using a mac as i cant run the changer.bat file?
Amybunnyjane is offline  
Reply With Quote
Old June 30th, 2012, 03:44 PM   #88 (permalink)
New Member
 
Join Date: Jun 2012
Posts: 13
 
Device(s):
Carrier: Not Provided

Thanks: 5
Thanked 0 Times in 0 Posts
Angry Wm8650 7" netbook does not charge when it is on

I've WM8650 7" netbook with android 2.2, kernel 2.6.32 with uberoid V12 1.5.7.
It does not get charged when it is plugged in to AC outlet and drains the battery, while it is on and I'm working on it. The spare part program does not show that it is plugged in. It only charges when the netbook is completely turned off and plugged in to AC outlet. Any ideas?
soumen is offline  
Reply With Quote
Old June 30th, 2012, 05:54 PM   #89 (permalink)
Senior Member
 
Join Date: Mar 2010
Location: Belgium
Gender: Male
Posts: 968
 
Device(s): Nexus One, Nexus 7
Carrier: Mobile Vikings

Thanks: 40
Thanked 93 Times in 84 Posts
Default

The only idea that comes to mind is simply bad hardware... sorry bro.
Teknologic is offline  
Reply With Quote
Old July 4th, 2012, 08:51 AM   #90 (permalink)
New Member
 
Join Date: Jul 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

i have mid android 7 inches... i have installed fw because it was not booting. after installation its touch is not working,,, plz help me, what should i do?? plz plz
humxa is offline  
Reply With Quote
sponsored links
Old July 4th, 2012, 09:32 AM   #91 (permalink)
Senior Member
 
Join Date: Mar 2010
Location: Belgium
Gender: Male
Posts: 968
 
Device(s): Nexus One, Nexus 7
Carrier: Mobile Vikings

Thanks: 40
Thanked 93 Times in 84 Posts
Default

Quote:
Originally Posted by humxa View Post
i have mid android 7 inches... i have installed fw because it was not booting. after installation its touch is not working,,, plz help me, what should i do?? plz plz
You'll have to use another model from the list of compatible tablets. You can install using the exact same method you did before, just choose another model from the list before you install. Keep trying numbers untill you find one that works properly, the problems is dozens of different hardware combinations. So make sure everything from wifi to sound and touch etc. is working.
Teknologic is offline  
Reply With Quote
Old July 6th, 2012, 05:50 AM   #92 (permalink)
New Member
 
Join Date: Jul 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

hi tried to modd now only get white screen and nothing else.. PLease help. son is upset
Lon3wolf2020 is offline  
Last edited by Lon3wolf2020; July 6th, 2012 at 06:23 AM. Reason: sorted other problem
Reply With Quote
Old July 9th, 2012, 02:53 PM   #93 (permalink)
New Member
 
Join Date: Jul 2012
Posts: 2
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by Teknologic View Post
The link

The list of known models
Code:
1=MID V7 7"
1=Fview NL Intertoys 7"
1=MID E18 7"
1=M009S Green LED 7"
1=TomTec Tablet 7"
2=M009S Blue LED 7"
2=iBAK-784 7"
2=Polaroid MPC700G 7"
2=Epad GW-70 7"
2=Bluetech PWS700HV 7"
2=MIDV7 Blue LED 7"
2=WinPad-C07 7"
2=Ceavis 7"
3=M003S (vt1603ts) 8"
3=Innovatek MID 8"
4=PC-802 8"            
5=BLY-806 8"
5=VIA WM8650 8"
6=M80003W 8"
6=M806B 8"
6=MID M80006 8"
7=Apex 7"
7=BLY-706F v1 7"
7=M706S 7"
7=Kingcom Joypad 72 7"
7=Kingcom Joypad 73 7"
7=I-INN Kirk M77V 7"
7=APAD (MID) 7002 7"
7=Netbook X6-7V
7=iDea USA IUMID-0071 7"
8=Maylong M-250 7"
8=MID703 7"
8=Netbook WM8650 7"            
8=V7 MID 7"
8=ILC PC Tab701 7"
8=KLD-MID701 7"
8=M709W 7"
8=Scipad 7"
8=MID710 7"
8=CE037B 7"
8=Promedia Netbook Kids 7" *
8=PO7466 7" Netbook *
8=Imos A702 7" Netbook *
8=Netpad 11 7"
8=Maipad 7"
9=Tabtech 7"
9=M010S 7"
9=FlashTab 7"
9=Xiron 7"
9=TomTec 7"
10=M80003W v1.5.x 8"
10=M012S 8"             
11=M70007T 7"
11=ViaPad M7 7"
11=VIA WM8650 7"
11=M768A 7"
11=Leader V70 7"
11=Epad GW-707 7"
12=ATF3416-7 7"         
12=NeoPad8650 7"
13=BLY-706F v3 7"
13=NETPAD 11 7"
13=Zixoon Z78 7"
14=E16 5cun1603 5"
15=ED99 8cun1603 8"     
15=MID 806 8"
15=M806S 8"
15=L.Ausa W8 8"
15=I-INN SPOCK M87V 8"
15=BLY-806 8"
15=PC-802 DT 8"
15=Kingcom Joypad 81
16=E18 7cun1603 7"
17=ED99 8cun8900 8"     
18=Ricatech RATAB 10"
18=TomTec 10"
18=NetBook WM8650 10"
18=Dmedia ATF3417 4G 10"
19=M013s 10"
19=Prixton 1001 10"
20=ePad M009D 7"
20=MID A713 7"
20=Intreeo MID-WL7 7"
21=ZX07D 7"
22=M008s 9.7"
23=E18_7cun1603DT152 7"
24=E88_97cun1603153 10"
25=IMITO Im7 1.5.1 7"
26=puzhi_7inch_vt1609_ts 7"
27=M01B 1.5.3 7"
27=Pad IMO Tab X3 7"
27=Evang TP-7001 7"
28=TP_puzhi_7inch_vt1609_ts_152 7"
29=M009plus 1.5.1 7"
30=M009SBDT 1.5.3 7"
30=M003F 7"
30=SKU10374 7"
31=M731123 7"
32=SV27C151 7"
33=CEM8650701 7"
34=CEM8650702 7"
35=CEM8650801 8"
36=CEM8650971 9.7"
37=CEM8650972 9.7"
38=E10 7" Phone
38=IMO Z3 7" Phone
39=aPad 2 9.7"
39=J355 9.7"
40=JSA8inch_std_vt1609 8"
40=WP-800 8"
41=8inch_vt1603 8"
41=DCPAD1398 8"
41=Atai 8650 8"
42=8inch_vt1609_ts 8"
42=Wintouch C08 8"
42=Winpad C-08 8"
43=SV28B 8"
44=M788P 153 7" Phone
44=wms8153_7inch_2g 7"
45=Szstzl 7A-1 7"
46=Szstzl 7A 7"
47=jinghan_10inch_lvds1603_wifibtn 10"
48=M013S_VT1603 10.1"
48=puzhi_10.1inch_vt1603_0308 10.1"
49=M013S_VT1609 10.1"
49=puzhi_10.1inch_vt1609_ts_0308 10.1"
50=Szstzl SV27D 151 7"
50=wms8153_7inch 7"
51=Portablet 4.3"
52=m008s_vt1603_151 9.7"
53=m008s_vt1603_155 9.7"
54=EZDY 9.7"
54=iPAD 2 9.7"
55=M003S (vt1609ts) 8"
56=eMatic eGlide2 7"
56=M731GA 7"
57=M731GF 7"
58=Sungale_Cyberus_ID702WTA_722 7"
58=Polaroid M800 7"
59=M009G 7"
60=MyMIDPAD M706 7"
60=M706B 7"
61=MyMIDPAD M709 7"
61=M709W 7"
62=MyMIDPAD M806 8"
63=TOMTOP C1212 7"
64=USB-TEK M7001 7"
65=ZX07d 155 1603 7"
66=ZX07d 155 1609 7"
67=BLY706Fv4 7"
68=Sungale_Cyberus_ID702WTA_722 sound fix 7"
69=puzhi_7inch_vt1609_ts sound fix version by XJOKERX 7"
70=BLY403_4.3inch_priv_yzx_a 4.3"
71=BLY403_4.3inch_priv_yzx_b 4.3"
72=PocketDroid_E403 4.3"
73=PC-802B (ts and sound fix version by DJ_BAZS) 8"
74=722_priv_jiutian_vt1609 7"
75=iJoyGalatea 7"
76=JBLITBOX8 8"
77=Lanyu806 8"
78=ZTAG_ZGTB007 7"
79=X6-7V_7_Netbook 7"
80=JBLITBOX8_TS 8"
81=Polaroid mpc700gpr001
82=JM Bruneau 7"
82=PI 6040H MID00-VB 7"
83=Bluetech MM977 7"
84=Bluetech MPCA622BT001 7"
85=Bluetech MPCPW43BT001 8"
85=MID800SPR001 8"
86=CONNEX Tablette CX 7"
86=MPCM700CX001 7"
87=MAYLONG M250 v2 7"
88=Polaroid_mpcw43bt001 4.3"
89=VDTECH 7"
89=mpc700gvd001 7"
Thanks dude!!! worked first time for me with option 27. The tab i have is the same as fixius' but its boxed as a Kyoto M7000a Mid Tablet
Sp00ky is offline  
Reply With Quote
Old July 14th, 2012, 12:59 PM   #94 (permalink)
New Member
 
Join Date: Jul 2012
Posts: 2
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default important

These link are broken, they dont work anymore
mikessa is offline  
Reply With Quote
Old July 14th, 2012, 01:05 PM   #95 (permalink)
New Member
 
Join Date: Jul 2012
Posts: 2
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default camera problem

Need to change a command line regarding the camera before flash. I had this problem but dont remember the step. You need to edit the env_uboot file in firmware intall folder and change the camera line. U should google about it.

Quote:
Originally Posted by romeomarco09 View Post
!!!!Tried 27 working except camera.. everytime i use camera my tablet goes hang!!! please help me! MID 7" wm8650 yellow light, red when charging.
mikessa is offline  
Reply With Quote
Old July 26th, 2012, 04:44 PM   #96 (permalink)
New Member
 
Join Date: Jul 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy Sim Card Support

I had flashed my ROM. Now I do not have Simcard support.. Its WM8650 7" Please do help me..

Thanks

Hemant
hemantslr is offline  
Reply With Quote
Old July 31st, 2012, 06:17 PM   #97 (permalink)
New Member
 
Join Date: Jan 2012
Posts: 6
 
Device(s):
Carrier: Not Provided

Thanks: 1
Thanked 0 Times in 0 Posts
Send a message via ICQ to Davy Bartoloni
Default

Quote:
Originally Posted by NyRaised View Post
This should only take a few minutes to boot the first time. Make sure that
after the tablet is up and running , that you reformat the sd card in a
computer again before you put it back in your tablet for storage.

Main features:
* Live Wallpaper Support! ("butterfly" live wallpaper included!)
* HoneyComb styled launcher, framework and icons
* Extreme WM8650 compatibility (60 models +!)
* Customizable ROM, make it even more LITE for example (see CHANGER 'x' for
more info)
* 100% Rooted
* Audio Boosted
* Memory cleaning boosted
* Memory read/write boosted
* Lite version, stripped away many apps
* Tries to support as many languages as possible
* Real Android Market
* Real working YouTube
Nice, but how is possible to launch automatically the "touch calibration" utility after installation? i've changes manually the calibration values, but my "modified" rom works only on my tablet.. on other tablets ( i've a computer shop) the calibration values are completely wrong ...when users are restoring the firmware.. they lose the touch capability ... and everyday someone comes to my shop with the issue ( and i need to launch the app using an external mouse )
thanks in advance for any help.
Davy Bartoloni is offline  
Reply With Quote
Old August 2nd, 2012, 08:27 AM   #98 (permalink)
New Member
 
Join Date: Aug 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Link Is Dead Can You Please Add New Link ? Thanks ??
treehere is offline  
Reply With Quote
Old August 3rd, 2012, 06:04 AM   #99 (permalink)
New Member
 
Join Date: Aug 2012
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi I have a MID S7 Wondermedia 8650 tablet + phone. I have tried to modify with all numbers and now the touch screen is not working. Help please
Urgent
jbswash85 is offline  
Reply With Quote
Old August 16th, 2012, 02:19 PM   #100 (permalink)
New Member
 
Join Date: Oct 2011
Posts: 1
 
Device(s):
Carrier: Not Provided

Thanks: 0
Thanked 0 Times in 0 Posts
Default ROM not available from links ? Any reason why ?

Can someone post an updated link to the ROM
OR
Upload the ROM to someplace we can download ?
abdulghaniz is offline  
Reply With Quote
Reply


Go Back   Android Forums > Android Tablets & MIDs > WonderMedia WM8650 > WM8650 - All Things Root
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 05:12 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.