Fixing Bricks/Odin Errors
This guide will work for soft/hard bricks.
This guide is open to contribution/editing/correcting
This may be a guide writen by me, but I do still get bricked and may sometimes still need help.
-----------------------------------------------------------------------------------------------------
SOFT BRICKS
This is where you get the annoying Samsung Screen.
DOWNLOAD REQUIRED (CREDITS TO JUSTANOTHERCROWD):
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above Just load in the files corresponding to the text field.
DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
-----------------------------------------------------------------------------------------------------
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
-Cannot get into download mode using the method I listed? Use the method(s) below:
Soldering Method
More methods coming soon
-----------------------------------------------------------------------------------------------------
I know how much of a pain posting in the Q/A section can be and the wait time is pretty bad, so if you need help regarding UNBRICKING and ONLY UNBRICKING feel free to post in here.
Hope you enjoy, this is my first guide, please don't flame. Any comments or suggestion is suggest, or if you have your own method I'll also post it
Also, don't hesitate to PM me
POST YOUR RESULTS!
This guide will work for soft/hard bricks.
This guide is open to contribution/editing/correcting
This may be a guide writen by me, but I do still get bricked and may sometimes still need help.
-----------------------------------------------------------------------------------------------------
SOFT BRICKS
This is where you get the annoying Samsung Screen.
DOWNLOAD REQUIRED (CREDITS TO JUSTANOTHERCROWD):
1. Get into Download Mode (WITH THE PHONE PLUGGED IN) by following the steps below
*Turn off the phone until you get to the charging battery screen (keep in mind, your phone is currently PLUGGED IN)
*Press volume up and down, and power all at once.
*As soon as the screen turns black, release your power button.
2. Unplug phone from USB
3. Open Odin (in Administrator if you're running W7 or Vista), try one of the ones I attached to this post, at least one of them is bound to work, some don't work for me, but works for others, some doesn't work for others, but works for me, whatever floats your boat
4. Load in the files into Odin that you have downloaded from above
Just load in the files corresponding to the text field. DO NOT CHECK REPARTITION.
5. Plug in your phone with the DL mode
6. Click start and wait for the magic
-----------------------------------------------------------------------------------------------------
NO-BOOT BRICKS
This is where your phone does NOT turn on, no combo of buttons works and power button does nothing.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!! If else, follow the steps from above.
This method is basically same as above, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "SOFT BRICKS" section.
Troubleshooting:
-Odin stuck at some random process?
*Switch to another odin
*Make sure you did NOT check repartition, if you did, just repeat all the steps over again, of course for the downloading parts, obviously.
-Phone not responsive?
*Try the hard brick section right under
-Phone stuck at Galaxy S logo screen?
*Put it in to DL mode, and run Odin again, it's just a bad install.
-All three ODIN is nonfunctional, stuck or giving "FAILED" errors?
*DO NOT CLOSE ODIN ONCE IT HAS FAILED!
*Unplug your phone
*Replug in your phone, get it into DL mode
* Unplug once it is in DL mode
*Replug and ODIN should recognize your phone
*Leave all the settings the same, then click "Start" again.
-Cannot get into download mode using the method I listed? Use the method(s) below:
Soldering Method
More methods coming soon
-----------------------------------------------------------------------------------------------------
I know how much of a pain posting in the Q/A section can be and the wait time is pretty bad, so if you need help regarding UNBRICKING and ONLY UNBRICKING feel free to post in here.
Hope you enjoy, this is my first guide, please don't flame. Any comments or suggestion is suggest, or if you have your own method I'll also post it
Also, don't hesitate to PM me
POST YOUR RESULTS!
-Steven
The only forums this guide should be posted on is XDA, DZ, and PHANDROID under the username DRAIKZ and EXPLOSIVE.
The only forums this guide should be posted on is XDA, DZ, and PHANDROID under the username DRAIKZ and EXPLOSIVE.
(
