• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

"Fast Boot" - on or off?

kinetic

Well-Known Member
Oct 27, 2009
104
23
It's my understanding that HTC is simply putting the phone in to a deep hibernation mode when turning the phone off and "Fast boot" is enabled. Are there any disadvantages to this? Extra power draw? Memory footprint? Since we are sometimes told to power cycle our phones when offending apps or other various problems are occurring, will this not be as effective when "fast boot" is enabled?

It appears that the "Restart" option seems to be doing a full power down cycle so maybe this is a moot point (I could be wrong here, though).
 
It's my understanding that HTC is simply putting the phone in to a deep hibernation mode when turning the phone off and "Fast boot" is enabled. Are there any disadvantages to this? Extra power draw? Memory footprint? Since we are sometimes told to power cycle our phones when offending apps or other various problems are occurring, will this not be as effective when "fast boot" is enabled?

It appears that the "Restart" option seems to be doing a full power down cycle so maybe this is a moot point (I could be wrong here, though).

On my EVO 3D Fastboot causes the native battery app to "NOT" reset Uptime or Awake time displays if you turn off the phone or rechange, however if Fastboot is turned "OFF" then all apps stored on the SD card will have android icons once you power off then restart instead application icons :-(
 
Upvote 0
Fast Boot doesn't allow the unit to fully power down, even if you tell it to power off. Fast Boot just goes into a very low power sleep mode. So, when you turn it back on, it is still partially loaded into memory and can load faster.

Personally, I didn't like it. I wanted the thing to turn completely off if I elected to turn it fully off without removing the battery. I also noticed that my LCD screen did not turn off. I could see the slight haze of the LCD backlight remaining on. Like if you unplug a LCD monitor.
 
Upvote 0
On my EVO 3D Fastboot causes the native battery app to "NOT" reset Uptime or Awake time displays if you turn off the phone or rechange, however if Fastboot is turned "OFF" then all apps stored on the SD card will have android icons once you power off then restart instead application icons :-(


to fix the icons issue just change your skin then change it back and the icons are normal again
 
Upvote 0
Fast Boot doesn't allow the unit to fully power down, even if you tell it to power off. Fast Boot just goes into a very low power sleep mode. So, when you turn it back on, it is still partially loaded into memory and can load faster.

Personally, I didn't like it. I wanted the thing to turn completely off if I elected to turn it fully off without removing the battery. I also noticed that my LCD screen did not turn off. I could see the slight haze of the LCD backlight remaining on. Like if you unplug a LCD monitor.

Hmmm. If that doesn't dissipate after a few seconds, something is not right at all. When the unit enters deep sleep, that display ought be completely dark. Mine is.

Fast boot is indeed sleep mode, keeping a small power supply to the silicon so that over time it doesn't suffer repeated full-power turn-on shocks that can diminish lifetime. It also keeps ram alive so that you can just go to your notification bar and all is as it was.

The display backlight ought be completely dead.
 
Upvote 0
Hmmm. If that doesn't dissipate after a few seconds, something is not right at all. When the unit enters deep sleep, that display ought be completely dark. Mine is.

Fast boot is indeed sleep mode, keeping a small power supply to the silicon so that over time it doesn't suffer repeated full-power turn-on shocks that can diminish lifetime. It also keeps ram alive so that you can just go to your notification bar and all is as it was.

The display backlight ought be completely dead.

I thought so, too. Kinda defeats the purpose of a low-powered mode if the display is still energized. But, I have hard reset the phone since I tried fast boot. So I just tried it again and now I can see the screen fully deenergizes. Something must have been screwy before. Yay hard reset.
 
  • Like
Reactions: EarlyMon
Upvote 0
I thought so, too. Kinda defeats the purpose of a low-powered mode if the display is still energized. But, I have hard reset the phone since I tried fast boot. So I just tried it again and now I can see the screen fully deenergizes. Something must have been screwy before. Yay hard reset.


That happened to me just last night, powered down (with fast boot enabled) with 75% charge, when I woke and went to turn the phone on I noticed the screen was black but "lit" after booting up the battery was at 17%....only happened once so far.
 
Upvote 0
Fast Boot doesn't allow the unit to fully power down, even if you tell it to power off. Fast Boot just goes into a very low power sleep mode. So, when you turn it back on, it is still partially loaded into memory and can load faster.

Personally, I didn't like it. I wanted the thing to turn completely off if I elected to turn it fully off without removing the battery. I also noticed that my LCD screen did not turn off. I could see the slight haze of the LCD backlight remaining on. Like if you unplug a LCD monitor.

I also noticed that the backlight of the LCD stayed on after using fastboot on the Sprint store demonstration model. It did, however, finally shut off after about ten or fifteen seconds.

That is strange that yours just stayed on. To be honest, I do not mind waiting the minute or so it takes to fully reboot my handset anyway.
 
Upvote 0
I tried to download / install Google Voice onto my Evo 3D today. After download and install, I could not get Google Voice to run at all. I was truly mystified as to why it wouldn't run.

Then I remembered reading somewhere about "Fast Boot" setting, and I checked under "Menu > Settings > Power" and sure enough Fast Boot was checked on by default.

I unchecked it, rebooted my Evo 3D. Then I got a Swiftkey X error that the language module couldn't be loaded. Then I rebooted one more time, and the Swiftkey X error went away - it ran fine. Then I tried Google Voice, and voila, it worked!!

IMHO this "Fast Boot" option is an unnecessary headache that can cause issues for users, the vast majority of whom will not know that this little setting is the culprit for their app issues.

IMHO this setting should be unchecked, and left off by default. We all want problem free experiences with our phones, and this "feature" causes more headaches than what ever benefit it may bring.

On another note - this Evo 3D is blazing fast!!! I really am appreciating how fast it is. I have been utterly spoiled by the responsiveness.

I used to think my Samsung Epic was fast, and my Evo 4G running CM7 was really fast. But in comparison to the Evo 3D, the Epic is really "slow", and the Evo 4G is definitely not as fast.

It's all relative I guess. When I switched from my Samsung Moment to the Epic, I was blown away by the speed improvement, and the Evo 4G as well. But the Evo 3D's CPU and power is no gimmick - it is mind numbingly fast!! :eek:
 
Upvote 0
Have you tried Restart for your reboot needs?

I use Fastboot and have so far found that the only things that Restart wouldn't cure required a battery pull. But - I'm just one guy.
Do you mean regular Restart option when rebooting, or are you referring to an app?

I don't recall definitively but I think I did use Restart option (long pressing the power button).
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones