• After 15+ years, we've made a big change: Android Forums is now Early Bird Club. Learn more here.

Root [CDMA] Perm rooting the Evo 3D with S-OFF

  • Like
Reactions: EarlyMon
Upvote 0
Question :

I attainted S-OFF and successfully flashed ClockWork

Phone activated fine, PRL updated fine too.

I also downloaded the SU-2.3.6.3-efgh-signed.zip


Question is, how do I flash it from Recovery ?

Do I copy it to the card's root and flash from recovery ?

Please help... I wanna be sure beore doing this last step :eek:
 
Upvote 0
After a successful S-OFF I'm having trouble booting in to recovery. I followed the 3D boot to recovery instructions but this just causes my phone to lock up/not respond/appear dead (it even stops charging). If I just hold power it'll boot normally. Fastboot is off.

To get around this, I connected my 3D to my PC and used 'adb.exe reboot-bootloader', which worked just fine. I reflashed the recovery from here, but that still doesn't fix the problem.

I've also flashed the correct version of su and have all my su-lovin' apps working correctly.

Anyone else just not able to boot in to recovery?
 
Upvote 0
Anyone know if an airrave will mess with the hands free activation? I am wondering if I should shut it off during the s-off procedure and basically go outside to run the exploit.
Not sure why but I have an aversion to calling Sprint, especially if they are going to track these things now.
Thanks so much everyone. Always very helpful.
 
Upvote 0
-_- I am disappoint... and i'm sure I messed up somewhere I doubt it's the case.

I downloaded the drivers, installed them. Ran the .exe, entered the necessary info, ran the bootloader, and it froze on the Magenta banner for 20 minutes. I then chose "next" as a restart, and it booted up no problem as well as hands-free update, but afterword I can't send any sms out, I believe it was code "62" or "64". I then tried to connect it and run the software to the phone as I first did, and it didn't recognize the phone!

HALP!!!

EDIT: just did a battery pull, and verified it's S-OFF. Still having code 64:2 with SMS, e-mail downloads and browser/marketplace work without a hitch =/
 
Upvote 0
Paranoia will destroy ya.

When necessary, the phone reprovisions itself. You can force this yourself by a ##786# reset, and I've done that without rooting. And had it fail sometimes, needing to call Sprint.

This is no different.

Now - time for my annual email to Dan Hesse letting him know what I think of my warranty - right after I check status on their latest concerning the story that Sprint will be servicing rooted phones - a move no doubt driven by the new unlocked policy.

wait let me get this straight sprint will service rooted phones now?


can i get a link?
 
  • Like
Reactions: michaelgrbbs
Upvote 0
HEYY OHHH!!! I am writing to you on my laptop via Barnacle on 3g!!! woohoo i am so excited

I was helped by a nice guy on the xda chat last night, well up all night, and i am using Barnacle for the first time!

I used Revolution, like in the OP, then use the fixed version of s-off and then got a nandroid via TeamWin recovery!

I have learned so much from here on Andriod Forum and also from all that I did tonight. I got the error 16 after about 10 minutes of not getting error 16 while I was trying to make calls out and use 3g. Talked to the nice lady on the phone with Sprint and she cleared it up after taking passwords and name and phone number.

This was fun! Rooting, S-off ing, and recovery/backup is fun!!
 
  • Like
Reactions: novox77
Upvote 0
-_- I am disappoint... and i'm sure I messed up somewhere I doubt it's the case.

I downloaded the drivers, installed them. Ran the .exe, entered the necessary info, ran the bootloader, and it froze on the Magenta banner for 20 minutes. I then chose "next" as a restart, and it booted up no problem as well as hands-free update, but afterword I can't send any sms out, I believe it was code "62" or "64". I then tried to connect it and run the software to the phone as I first did, and it didn't recognize the phone!

HALP!!!

EDIT: just did a battery pull, and verified it's S-OFF. Still having code 64:2 with SMS, e-mail downloads and browser/marketplace work without a hitch =/

Help? Somebody? Please?
 
Upvote 0
Spoke to them on the phone as well as eChat, had me resetting using ##72786# and then ##3282# and entering the code they provided me with, amounting to me receiving the same codes but now I can't get through HFA :(

I had the same exact experience and symptoms as you to a T.

I stayed on the phone until they got an upper level tech (staying cheerful the whole way through).

In my case, she noticed that one part of my code wasn't updating with the OTA activation goodies they were pushing thru. By coincidence, my old Evo 4G was still on (she asked) so I turned that off and it went thru when she tried again.

She couldn't honestly tell if that other old phone was mucking things up or coincidence, but she said coincidence. Just tossing that out there in case you have your old phone on as I did because you just never know.

Usually, you get voice, no data, I was upside down on that like you are.

Here's your most important things:

1. Keep the faith.
2. Do not panic.
3. Stay friendly with the tech, they're going to have to stick with you - if you stay very friendly, they stay very relaxed and can think easier.

Finally, do not babble about rooting. Sorry to be blunt, but there's no need to sidetrack them from their known procedures.

Simply say you did a hard reset of your phone and you have data but not voice - and that you reset it because something you downloaded seemed goofy. They have some little-used procedure to fix this, and you have to stay patient because all I know about that is the simplified and sanitized version.

Say you read someone on the internet had this same problem and someone named Joy knew how to fix it. (Joy is VERY nice.)

Took me over an hour just with the senior tech (Joy), but - it is solvable.

Make sure the line you're talking to the tech on has a full charge if it's a wireless handset on your home line.

PS - Even though voice doesn't work - to get through to them, dial *2 on your phone, then the top menu selection to get support - dial 0 when given choices 1 or 2.

Keep it simple:

1. Reset because you downloaded something goofy.
2. You have data but no voice.
3. HFA is not working.

4. No long stories. ;) (can't stress that enough)

Best luck!
 
Upvote 0

BEST TECH IN 2023

We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.

Smartphones