Looking to root a STOCK .602 and was wondering if there is any methoud to root straight from stock without having to sbf back to froyo, etc.
Updated 08/25/2011:
CONFIRMED ROOT in less than 5 mins
DroidX running FULL STOCK .602 13p
Followed this exactly (via DroidLife):
Instructions:
1. Make sure you have Motorola drivers installed - [Download Drivers]
2. Download and unzip ‘Droid 3 easy root script v5′ - [Download 1-Click]
3. On your phone: Settings > Applications > Development > USB debugging(check box)
4. Plug phone into computer and select “Charge Only” mode
5. Navigate to ‘Droid 3 easy root’ folder and run ‘Click to root your Droid 3.bat’
6. Now just follow the instructions in the command window and unlock the phone after each reboot.
Original post on RootzWiki
As an FYI on this particular DroidX. Recently this phone was completely sbfd to froyo, then an official OTA to a clean stock .602 with a 13p radio. This was as clean 100% stock as you can get on the .602 13p, so this is the poo take a big whiff.
Updated 08/25/2011:
CONFIRMED ROOT in less than 5 mins
DroidX running FULL STOCK .602 13p
Followed this exactly (via DroidLife):
Instructions:
1. Make sure you have Motorola drivers installed - [Download Drivers]
2. Download and unzip ‘Droid 3 easy root script v5′ - [Download 1-Click]
3. On your phone: Settings > Applications > Development > USB debugging(check box)
4. Plug phone into computer and select “Charge Only” mode
5. Navigate to ‘Droid 3 easy root’ folder and run ‘Click to root your Droid 3.bat’
6. Now just follow the instructions in the command window and unlock the phone after each reboot.
Original post on RootzWiki
As an FYI on this particular DroidX. Recently this phone was completely sbfd to froyo, then an official OTA to a clean stock .602 with a 13p radio. This was as clean 100% stock as you can get on the .602 13p, so this is the poo take a big whiff.