Root i think i almost bricked my phone

[nu2moding]

ok, here's the thing-i had rooted using gingerbreak,, bought root explorer, etc, then accidently tried to flash this [Huawei Ideos C8150 / U8150][General Development][Update 01-04-2011] - xda-developers
using cwm,-(going thru ideos u8150 thingy) i backed up, tried to flash then recover since the aforementioned rom made the huawei logo stay on for like 30 min b4 i pulled the batt.
that said wen i tried to recover, i got back a md5 mismatch-
luckily i had an ultrajack backup made the day b4, but since im nu2moding, it took me a while to guess that i should re-fastboot UJ and use the nandroid from there. that made the fon work, BUT now every time i try to flash ANY rom, including the stock one posted elsewhere on here, i get "cant find update script".

did i make a BIG boo boo or is it repairable?

 

[CyberTails]

ok, here's the thing-i had rooted using gingerbreak,, bought root explorer, etc, then accidently tried to flash this [Huawei Ideos C8150 / U8150][General Development][Update 01-04-2011] - xda-developers
using cwm,-(going thru ideos u8150 thingy) i backed up, tried to flash then recover since the aforementioned rom made the huawei logo stay on for like 30 min b4 i pulled the batt.
that said wen i tried to recover, i got back a md5 mismatch-
luckily i had an ultrajack backup made the day b4, but since im nu2moding, it took me a while to guess that i should re-fastboot UJ and use the nandroid from there. that made the fon work, BUT now every time i try to flash ANY rom, including the stock one posted elsewhere on here, i get "cant find update script".

did i make a BIG boo boo or is it repairable?

1. as I said before in the M835 Guide, flashing any big mod like CM7 or similiar shouldn't be installed right away as I tested a couple myself (CM7 and FusionIDEOS 2.7.4) and both gave me 1 or more issues

2. I also prefer UJ over CWM because of the MD5 Mismatch nonsense with CWM, so I'm glad that you rescued your phone from almost-bricking

3. Did you try flashing again with UJ or CWM?

 

[nu2moding]

I flashed with uj but didn't try with cwm.
can that be y I can't even flash the stock rom posted in this forum?
I even tried to flash a ideos8150 w/multitouch rom n still the " can't find update script" appears n that's the main thing that has me worried/concerned

 

[CyberTails]

I flashed with uj but didn't try with cwm.
can that be y I can't even flash the stock rom posted in this forum?
I even tried to flash a ideos8150 w/multitouch rom n still the " can't find update script" appears n that's the main thing that has me worried/concerned

You shouldn't worry, Aftermarket ROMs I believe are not that compatible with the M835 yet, the only things I have managed to install successfully was either backups I made with UJ or Boot Screens (i.e. the ones I use with the tutorial I written earlier)

 

[nu2moding]

call me paranoid but sum1 told me that u can recover n still have the system folder(?) jacked up.
that's wat I think mite have happened since I keep getting s script read errors on everything.
ima try n change d boot sound later n see if, folowing2d letter info provided elsewhere on here, if I get any probs
..

 

[KillSwitch007]

Performing a True Full Reset

Zippyshare.com - U8150 V100R001C127B818SP05.zip

Use the end key and the vol + key to enter firmware update.
This will work for the Huawei U8150. EVEN IF IT's BRICKED.
Good luck. Goddess Bless

 

[nu2moding]

Performing a True Full Reset

Zippyshare.com - U8150 V100R001C127B818SP05.zip

Use the end key and the vol + key to enter firmware update.
This will work for the Huawei U8150. EVEN IF IT's BRICKED.
Good luck. Goddess Bless

but will this work on the m835?


nevermind
IT DOESNT!!! smart lil me decided to do this and ended up with no boot or poweron.
call n end lights flash n red LED blinks, vibes once then turns off...
i guess its officially bricked

 

[DerekElensar]

really? I got stuck in a boot loop(it would boot up past the "hello, hello, hello" part of the metro pcs boot screen, and then restart completely and do it all over again), and when I did this, it worked perfectly...

it should start up with the factory reset screen

(btw, I was reading that article, and saw that sometimes there are still "ghosts" in the machine... when you do a factory reset, does this happen? I'd like to factory reset my phone sometime and not have little gremlins running around..)