Cases!

[kylecummins]

I think im going to order the boxwave flexiskin in black and the active case in the only color (grey).

Total 33.90 with shipping, anyone got any advice/experience with these before i pull the trigger?

 

[Rulzo]

Been more than 24 hours since i put on my Skinomi Tech Skin getting hardcore streaks and a lot of orange peel they say they will dissapear but i dont believe them since it seems to be getting worse not better. I ordered an XO skin hope that turns out better

 

[snapcase]

I'm currently using the Incipio case they had in the VZW store. It's silicone with a hard shell over that. I picked it up this morning and I'm not sure if I'lll keep it. That silicone portion attracts lint and dust like a magnet.

I just want a case to make it a little easier to hold onto and use with one hand. Trying to swype words with one hand and no case, I've nearly dropped the phone a few times... it's just so wide and thin. Impact protection would be nice too but meh.. I don't drop my phones all the time.

 

[TrumpetMan]

I'm currently using the Incipio case they had in the VZW store. It's silicone with a hard shell over that. I picked it up this morning and I'm not sure if I'lll keep it. That silicone portion attracts lint and dust like a magnet.

I'm with ya' on this also. I like the case and feel that it's well made but it comes out of my pocket looking like a lint ball. I had the Seidio Surface case on my Dinc since I purchased the phone so I think I'm going back to that case with the holster. I'm also considering the Seidio Active case but I'm wondering if it has the same lint issues.

 

[kylecummins]

http://www.amazon.com/ArmorSuit-Mil..._22?s=wireless&ie=UTF8&qid=1324941926&sr=1-22

anyone use this product before? Thinking it would cover the few scratches I got on the phone yesterday when I dropped it.

 

[dyno]

I got the Diztronic on ebay, it has a great feel and it fits great. It has the high gloss TPU around the edges for some extra grip and the back is a smooth matte finish.

Yes, the volume cutout stinks and it always had the volume rocker pushed down. Easily fixed with a Dremel, high speed bit, and stone grinding wheel to smooth the edges. It worked great.

 

[kylecummins]

Galaxy Nexus Accessories / Samsung Galaxy Nexus Accessories

Narrowed it down to 3

Flexiskin, tuxedo, active

 

[mattywalnuts]

Galaxy Nexus Accessories / Samsung Galaxy Nexus Accessories

Narrowed it down to 3

Flexiskin, tuxedo, active

ha..dude, just commit...they dont cost too much and you can always return it. i picked the tuxedo

 

[kylecummins]

I would have ordered all 3 if i got the free shipping over 25$

Also didnt see the return policy, would it apply with stuff sent to canada?

 

[Member112085]

Ordered two cases on Amazon last night. They had the Barely There cases for $21.38 and they had it in pink, so I got that, and then this one for $5.90:

 

[RichSz]

A few people have asked about a pouch which will fit the phone. I got this one:
Amazon.com: Black Leather Wing Case for Samsung Galaxy S II SkyRocket , Galaxy Nexus , Exhibit II , Stratosphere * Includes micro-USB Charging cable**: Electronics

It has velcro sides so can be resized to fit almost any phone. It works OK, but I think the GNex is at the edge of its size limit. I hoped to fit a TPU case inside it but it won't close. Fits the phone fine if it's naked.

The case feels more like plastic than leather. Maybe it's just crappy leather.

 

[JMKosmo]

Seidio is replacing my case. I love that company and I love their case!

 

[captclam]

If it does, it will only work with the ACTIVE case. Definitly won't work with the Surface case. My Active case + holster is on the way, and I also have the Incipio case, so as soon as I receive the active holster I will post back results

Hi Jason,

Any word back on the fit with the extended battery using the Seidio

 

[NewDad09]

My main goal was to find a good holster that I could use with a TPU case. Here's my setup:

Extended Battery - using the extended battery back as provided

Diztronic TPU High Gloss Black - I love the TPU style case for the grip and the ability to easily remove it. I find the high gloss finish provides a better grip compared to the matte version. I have had some small issues with the volume rocker and will probably cut it out eventually

Seidio Surface Holster - I love their holsters and it works nicely with TPU case. I had the same setup with the DInc and was glad it worked for the GNex.

Rearth Ringbo Ultimate Clear Screen Protector - dry application that was easy to put on but has a hazy/oily look when the screen is black. The positive is that it is cut well and does not get pushed up by the edges of the case. I only picked this since there were limited options before the phone was released and I will be swapping it out eventually.

Bracketron PHV-200-BL Grip-iT Mobile Device Holder - A decent $10 option for mouting the phone in the car. I almost got the Tetrax Fixway holder but didn't want to have the metal disc stuck on the back of the case all the time.

 

[Member112085]

Seidio is replacing my case. I love that company and I love their case!

I had a Seidio case when I had a blackberry, and I had similar experiences with them. They were great with the customer service.

 

[itype2slo]

I just preordered a Sena ultraslim pouch. I love these. Great quality, look and feel. Plus, they are a little cheaper on the preorder.

Sena Cases - Designer Leather Cases : Galaxy Nexus Leather Cases UltraSlim for Google

 

[crackers8199]

Yeah but if you see some other reviews. It took like 3 times to get one that works "right" which seems a bit of BS. That Clay guy goes on to blame amazon for bad shipping packaging... whatever. The thing is just stupidly designed. Just cut it out like boxwave does. I had to cut mine to get it to work. If yours works now, they may have done some tweaks after getting complaints and are now sending proper ones, who know but cutting it out would just solve the issue.

spend your money on boxwave, a few extra bucks you'll be pleased (and the screen cover that comes with diztronic is junk plastic as well, not a bonus).

i've been in touch with clay via e-mail, he has been nothing but helpful (including responding to two separate e-mails within 20 minutes on christmas day)...

anyway, he said they will be releasing a new version of the diztronic for the galaxy nexus with the volume rocker cut out. said it should be out in the first or second week of january...

 

[crackers8199]

I think im going to order the boxwave flexiskin in black and the active case in the only color (grey).

Total 33.90 with shipping, anyone got any advice/experience with these before i pull the trigger?

if you end up ordering them, i'd be interested in a review...i'm probably going to get the active and the slim rubberized. i was thinking about trying the flexiskin too but the fact that it doesn't have a picture up yet is a little concerning...

i'm also worried about what kind of bulk the active and slim rubberized are going to add. was waiting to see some reviews on amazon...

 

[kcs7272]

i've been in touch with clay via e-mail, he has been nothing but helpful (including responding to two separate e-mails within 20 minutes on christmas day)...

anyway, he said they will be releasing a new version of the diztronic for the galaxy nexus with the volume rocker cut out. said it should be out in the first or second week of january...

I emailed him today. He is very polite and fast to respond. He actually mailed me a new case today.

 

[Jason101]

Hi Jason,

Any word back on the fit with the extended battery using the Seidio

 

[kylecummins]

if you end up ordering them, i'd be interested in a review...i'm probably going to get the active and the slim rubberized. i was thinking about trying the flexiskin too but the fact that it doesn't have a picture up yet is a little concerning...

i'm also worried about what kind of bulk the active and slim rubberized are going to add. was waiting to see some reviews on amazon...

I havnt ordered yet, id also like to see a picture of the flexiskin. And i dont know if i want the active so much anymore, never been a fan of hard plastic. I'm still in limbo and probably have not purchased because my extended warranty is supposed to cover 1 phone replacement. I really want a case that still brags about the phones slim sleek design or id rather keep it naked.

 

[gunit34328]

Yeah but if you see some other reviews. It took like 3 times to get one that works "right" which seems a bit of BS. That Clay guy goes on to blame amazon for bad shipping packaging... whatever. The thing is just stupidly designed. Just cut it out like boxwave does. I had to cut mine to get it to work. If yours works now, they may have done some tweaks after getting complaints and are now sending proper ones, who know but cutting it out would just solve the issue.

spend your money on boxwave, a few extra bucks you'll be pleased (and the screen cover that comes with diztronic is junk plastic as well, not a bonus).

just in case anyone was interested who already bought the tpu case and didnt want to cut out the volume buttons:

12/27/2011 Update: We are now shipping our revision 2 Matte Back Black case. Revision 2 has a larger indent on the inside of the case to eliminate the phantom button pressing some Verizon users have been reporting. Revision 2 also includes a newly designed high quality Japanese film screen protector that covers the display edge to edge. This is an interim release and is available in very limited quantities as most are reserved as replacements for previous customers that had issues with our revision 1 case. We will be releasing a revision 3 case that has a volume button cutout the first week of January for all of our styles with the exception of Black GlitterFlex. If you purchased a revision 1 case and are having issues with the case pressing the volume down button by itself please contact Diztronic Support (not Amazon Customer Service) for a free replacement. Please include your order number with your email.

Slip your Samsung Galaxy Nexus into this custom fit Matte Back Black Revision 2 TPU Case by Diztronic™ and experience the peace of mind of knowing your investment is well protected. Flexible, yet stronger and more durable than silicone, TPU offers excellent shock absorption and abrasion resistance while maintaining a thin form factor. The raised wrap-around edges make for a "lay-on-the-table" design that helps protect the glass screen from damage. Easy to install and remove, and definitely affordable--why not build a changeable wardrobe for your phone? Available from Diztronic™ in High Gloss Black, High Gloss Smoke, Matte Back Black, Matte Back Smoke, Smoke GlitterFlex, Pink GlitterFlex and Black GlitterFlex.

All products sold in Diztronic™ or TPU-Cases™ retail packaging carry a 90 day warranty.

**Please note** Our case is designed to work with the standard battery size only. In addition using a case on your phone may make it impossible to fit your phone into desk or vehicle docks.

 

[tomato88]

Are there any good clear cases that are not gel case? Boxwave has one in smoke grey but I'm hesitant to try it out.

 

[TheRoosevelt]

just in case anyone was interested who already bought the tpu case and didnt want to cut out the volume buttons:

12/27/2011 Update: We are now shipping our revision 2 Matte Back Black case. Revision 2 has a larger indent on the inside of the case to eliminate the phantom button pressing some Verizon users have been reporting. Revision 2 also includes a newly designed high quality Japanese film screen protector that covers the display edge to edge. This is an interim release and is available in very limited quantities as most are reserved as replacements for previous customers that had issues with our revision 1 case. We will be releasing a revision 3 case that has a volume button cutout the first week of January for all of our styles with the exception of Black GlitterFlex. If you purchased a revision 1 case and are having issues with the case pressing the volume down button by itself please contact Diztronic Support (not Amazon Customer Service) for a free replacement. Please include your order number with your email.

Slip your Samsung Galaxy Nexus into this custom fit Matte Back Black Revision 2 TPU Case by Diztronic

 

[Deleted User]

Not sure if this is off-topic but seemed like a good thread to ask in... has anyone used the extended battery cover with the standard battery? If so, do you feel any give in the back of the phone, or does it feel just as solid? Just wondering because if I'm going to be switching batteries mid-day I don't really want to be carrying around two back covers with me.