Root Sprint/Boost ## codes for the Transform Ultra

[chevanlol360]

This is a list of codes that i have narrowed down from hundreds of various list. The ones below are codes that i have tested and can confirm that they worked.

Use these codes at YOUR OWN RISK!!! By using the codes, you understand that I am not liable for any or all consequences of the codes below.

*#7780#

This code can be used for a factory data reset. It'll remove following things:
Google account settings stored in your phone
System and application data and settings
Downloaded applications
It'll NOT remove:
Current system software and bundled applications
SD card files e.g. photos, music files, etc.
PS: Once you give this code, you get a prompt screen asking you to click on "Reset phone" button. So you get a chance to cancel your operation


Some of the codes below needs your MSL code.

Codes to launch various Factory Tests:
*#0*# - LCD test
*#0673# - Melody test[/B]
*#0842# - Device test (Vibration test)
*#2663# - Touch screen version
*#0588# - Proximity sensor test
*#3264# - RAM version
##8778# - Bootloader
##33284# - Shows the cellular radio debug info, signal etc...
##72786# - changes DSA back to Factory Close to a hand free activation.
*#0228# - Battery Status
*#2663# - Main firmware update
*#7450# - Phone Dump Mode Disable
*#7451# - Phone Dump Mode Enable
*#06# - Displays MEID

 

[Loota]

Mind if I quote you for the general info sticky?

edit - nevermind I think I'd prefer to link to this..

 

[chevanlol360]

Mind if I quote you for the general info sticky?

edit - nevermind I think I'd prefer to link to this..

Either way its fine with me Loota

 

[gkak]

interesting... when using the touchscreen test in the LCD test the. touchscreen doesn't screw up like it usually does

 

[KydDynoMyte]

*#2663# listed twice. Does a different code give you touch screen version?

interesting... when using the touchscreen test in the LCD test the. touchscreen doesn't screw up like it usually does

Screws up for me on both touch screen tests.

 

[gkak]

*#2663# listed twice. Does a different code give you touch screen version?



Screws up for me on both touch screen tests.

in *#0*# screentest I can drag for about 15 seconds before it skips . with *#2663# I get an option for firmware update . debating whether I should accept

 

[smith058]

interesting... when using the touchscreen test in the LCD test the. touchscreen doesn't screw up like it usually does

I confirm! With significant pressure I cannot get it to skip.. only skips with easy pressure.
Using *#0*# touch

 

[smith058]

I tested again and again.... this is great news.... we need to look into this!

It actually works..... yeah!!!!!

 

[chevanlol360]

I tested again and again.... this is great news.... we need to look into this!

It actually works..... yeah!!!!!

Yeah i definitely see a difference with it too.

 

[cwgraf71]

I would like to see if there is a *#2663# - Main firmware update available I am on Sprint and already have a problem with battery/USB any suggestions? Any ideas if it would just hurt more? Go for it or just forget about it and wait til I get a new phone?

 

[chevanlol360]

I would like to see if there is a *#2663# - Main firmware update available I am on Sprint and already have a problem with battery/USB any suggestions? Any ideas if it would just hurt more? Go for it or just forget about it and wait til I get a new phone?

Theres no firmware update available at this time. Wait till you get a new phone.

 

[gpotvin]

Are there any other codes?

 

[chevanlol360]

Are there any other codes?

Nope nothing new

 

[tripdoc79]

what does the ##33284# change DSA do?

 

[reapert]

##33284# is a test and settings menu for different things becareful here its buggy do not change or use menu items unless you know what they're for . ##72786# does what your asking. it resets the network setting to factory if you run into a network error .
chev i'm having problems ( every modded rom i've used the evdo setting gets the error 7) with ##33284# others / hrd/1x / evdo .

 

[gkak]

if u use the *#0*# code and choose "touch" u can see the greatness that is bobZhome's new kernel. no more skips

 

[rellic]

I am new to all this I think someone else or a program like a treacer had control over my cell. Boost just did an update and now I do not have any signal besides wifi any help plz...

 

[alpha2k]

I was trying to fix my incoming calls and the tech had me go to the MIN settings to enter the MIN number and my phone number..... Anyone know what the # number is for that?

 

[cmtoontown]

Note: Most of these codes dont work on curtain roms

 

[Sinful7]

Hi.I have this code I used (#72786##) is how to the previous state to go back because now antenna!?