Galaxy S4 Cases and covers!

[RoadRunnerSS]

Ok, one thing that annoys me is why the hell does the built in screen stick to my S4 screen? I do have a screen protector on my S4 itself, but I won't be taking it off. Sometimes the Defender screen will stick to it and it makes it look like crap. Then I have to take the whole case apart. Anyone else have this problem?

 

[Sandcracka]

I have the same case but without a screen protector on the S4. The otterbox screen protector doesn't stick to my screen at all. Matter of fact the screen protector on the otterbox seems to sit flush against the phone screen and feels great. I can't even tell that there's a screen protector lol. You might want to consider taking the screen protector off your phone. I had an S3 with an otterbox and no additional screen protector. When I traded in my S3 there wasn't a single blemish on my phone at all. I just made sure to take my phone out of the box every once in a while to clean it off and clean out the otterbox. Your additional screen protector is most likely what the otterbox is sticking to.

 

[Edge1978]

Ok, one thing that annoys me is why the hell does the built in screen stick to my S4 screen? I do have a screen protector on my S4 itself, but I won't be taking it off. Sometimes the Defender screen will stick to it and it makes it look like crap. Then I have to take the whole case apart. Anyone else have this problem?

I haven't used the Defender since I sold my iPhone 4 a few years ago but when I did, I removed the Defender screen protector because of this very reason. I already had a screen protector on my i4 so I didn't worry about the screen.

 

[Atma]

Merged a couple more threads with the case/cover thread.

Sorry for any confusion or blowing your mind.

 

[KiwiMark67]

Battery cases:
My solution is to have a battery box with a USB connection that I can plug my cellphone into - this gives me a way of charging my phone when away from power.
I can go camping for a week and not run out of power on my phone.
The battery box I have takes 4 x 18650 Li-Ion cells which I can replace as needed, currently 2.5Ah cells but I might buy some new 3.4Ah Panasonic cells since my S4 has a much higher capacity battery than my old phone had.

For anyone wanting these battery cases for their phone - are you unable to run a whole day on the phone's standard battery? I've just been charging each night and haven't had a problem.

 

[Screech]

I just got the Spigen Neo Hybrid (yellow), GLAS.tR and aluminum buttons. I think this is the case/screen for me. Easy in/out of pocket, high contrast case that is easy to see among other black electronics. Very clear glass that doesn't appear to interfere with use of the phone at all. I will say I was disappointed a little when I found that only 1 of my headsets work with the cover on. The Razer BlackShark's plug will not fit. But luckily I already have a BT headset adapter so I can use any headset with that, just the mic is only that of the adapter rather than the one on the headset (at least I can remove the mic from the headset when using it this way)... Looking for a short 2-3 inch smartphone extension that will fit the case so I can use any headset directly with the phone again. Anyone know of a 3 ring 3.5mm female to 3 ring 3.5 male that is 3 inches or shorter with the male plug fitting in the Spigen case?

I did get this case as a temp when I found it in stock locally. I found that it was to grabby on my pockets and the silicone was already starting to soft and pull out of shape a little near the top right. I may still use this case on race weekends. But for day to day the Spigen is much better.

 

[speedlever]

I picked up a Seidio Active case for the GS4 the other day. It fits nicely in the above holster, a bit more snug than the Speck CandyShell.

I still haven't found case Nirvana yet. I would like to try the Speck CandyShell Grip case, but don't want to pay $35 for it.

Honestly, I'm kinda leaning towards the Speck CandyShell and/or Grip as my fav thus far. It has really started to grow on me. I like the Seidio Active, but find the buttons are almost too sensitive, if such a thing is possible. I just wish the CandyShell weren't so slippery on the back and sides. Maybe the Grip will be the perfect option for me.

Couldn't resist the temptation today and I returned the Seidio Active in exchange for the Speck CandyShell Grip. While I liked the Seidio Active case, the power button was on a raised portion instead of a depressed portion of the case and it was too easy to hit the power button by accident when I pulled it out of the vertical holster.

I'm back to the Speck CandyShell while I wait on the Speck CS Grip case to arrive.

Heh! The fun never stops.

 

[mach1man]

I haven't seen anyone post any pics or talk a whole lot about the UAG Cases,
so I thought I'd post a few quick pics and give my opinion.

I got mine over the weekend and couldn't be happier with it.
It fits like a glove, and the build quality of this case is great!
I like how this Hybrid Style Case is a one solid piece that you don't have to mess with layering or worrying about something coming undone or popping off. I personally hate that really cheap feeling, soft silicone wrap that alot of the manufacturers use. That stuff wears and stretches over time like an old sock, and is nothing but a filthy LINT MAGNET imo. This case isn't like that at all.

It feels very solid in the hand, all buttons are still very easy to push, and all openings for the ports are large enough to accommodate your plugs.
I also think that the separation of flash and camera holes was a great idea to avoid glare, and like the added depth to them so you don't have to worry so much about the lens getting scratched. I kind of wish the lip around the screen was a bit thicker, but I think thats just me being a little nit-picky. The lip is very solid and not flimsy at all.

The best part about this case to me is how thin it keeps the GS4,
while still being a solid enough build to provide good protection for the moderate user. If I were going for a rigorous outing somewhere, I would probably feel better with a Ballistic SG Maxx on my phone...
but for most users that don't abuse the hell out of their devices this UAG Case should do just fine.....
At least it will for me.
and if I really don't want to have to worry about things in an outdoor element situation, I'll just take my G'Zone Commando instead!

Another thing I should mention about this case is the texture.
When you look at the pictures on UAG's website, this case looks very smooth and slick. I was pleasantly surprised to see that this wasn't the way it actually is. I'm not gonna BS anyone and say this case has awesome textured grip because it doesn't....but it's not as slippery as it looks in their pictures. My pics are more accurate. Your welcome UAG!

Last but not least.
UAG doesn't make holsters for these cases, at least not yet.
So I have a real treat for you all.....
I bought this crappy a$$ case on ebay while I was waiting for my GS4 to arrive. I just wanted to have something to slap on it until I figured out which case I really wanted to invest in.
The case itself is just like I said...Crappy.
BUT it comes with a Belt Clip Holster that is actually built Very Well.
It just so happens that the GS4 wrapped in the UAG Case fits PERFECTLY inside this Holster!!! (SCREEN FACING INWARD ONLY THOUGH)
Hope this helps someone else, heres the link:

Samsung Galaxy S4 I9500 Black Case Cover Belt Clip Holster Stand Screen Film | eBay
I bought the kind that came with a screen protector, if you don't care about that, you can save a few more dollars if you look around.
Either way...not bad at all for a good holster that fits with the UAG!
IF ANYONE FINDS A HOLSTER THAT FITS WITH THE UAG CASE WHERE THE SCREEN FACES OUTWARDS, PLEASE LET ME KNOW!!!
I'M ALSO TRYING TO FIND A CHARGING DOCK THAT WILL WORK WITH THE UAG CASE.

I personally don't wear a belt clip holster,
but needed one for the hook in my Jeep to attach my GS4 to.
This works great!

AND HERE IS A PIC TO SHOW HOW LITTLE SIZE THE UAG CASE ADDS TO THE GS4.

I really want this case!!! But I have a zagg shield on my phone now, will this case peel up the zagg? I've heard yes and no reviews. Please help I want to buy one of the UAG cases so bad

 

[dopejayoh]

I just received my Neo Hybrid Spigen case and I absolutely love this case. I like the look of it! It does make the phone just a tad more bulkier but this case is amazing. I recommend it! Worth the price, imo. :thumbup:

 

[GatorfanDroid]

I like the UAG case but i like the otterbox just a little better . It has the built in screen protector and holster if I wanna use it at all.

I just ordered my self an otterbox defender series Realtree extra camo case! can't wait for to get here.

 

[BLACKTOOTHGRIN]

I really want this case!!! But I have a zagg shield on my phone now, will this case peel up the zagg? I've heard yes and no reviews. Please help I want to buy one of the UAG cases so bad

It might, and it might not....

I think it will depend on 2 factors.
1. How evenly did you install your screen protector?
2. Did the Zagg protector have an adhesive backing?

Let me explain:
I've had 2 GS4's.
With both devices I chose to just leave the factory plastic on as a screen protector.
(imho, that factory film works just as well as any cheapie screen protector. it's already installed for you, so if someone is not going to put on a Quality protector...why bother removing it just to put on more cheap junk...right?)

Anyways....
On one of the GS4's the factory plastic was centered pretty evenly.
Using the UAG Case on it was fine, no issues.
On the other GS4, the factory plastic was off center quite a bit towards the left side.
Using the UAG Case on that one caused a little bubble to form in the top an bottom left corners.
No matter how many times I took the case off and smoothed them away, they came back.
I don't even bother doing that anymore. Now I just hit them with my nail every now and then because they aren't progressing.

All of that said,
if your install of your Zagg is centered pretty well...I don't think you'll have a problem.
Also you have to keep in mind that my factory plastic doesnt have an adhesive backing so it pops up easily.
Your Zagg might have had an adhesive backing. (I don't know, never used one)
If it DID, the UAG Case might not bother it at all even if it IS off center, and providing you have a solid bond to the screen.

Hope that helps you out a bit.

In my case however....
If I later choose to buy a quality screen protector,
I will probably try to install it with the UAG Case already on. (if possible)
In fact, if there are any people out there using a Spigen Glas.tR with a UAG Case,
please let us know the easiest way YOU found to do this!

 

[mach1man]

Thanks!!! That helps me a lot. It is pretty center and does have an adhesive back. Ill try it worst case is that it doesnt work and I send the zagg for a warranty replacement then cut the new one skinnier.

 

[andromatix]

http://www.technologytell.com/gadgets/files/2013/03/T21-3133-Tech21-Impact-Snap-with-Cover-for-Samsung-Galaxy-S-4-Black-05.png

I got the Tech21 Impactology case...solid, very protective, but adds significant bulk...

I want the Kommandant aluminum case....looks very elegant and cool...wonder if anyone got one and how you feel about it?

http://www.casefanatic.com/samsung-2/galaxy-s4/case-galaxy-s4/kommandant-samsung-galaxy-s4-metal-case-case/

 

[speedlever]

I have finally found a case that I'm happy with: the Speck CandyShell Grip.

I've tried Tech-21 cases, Minisuit bumper, Minisuit Kinnect, Speck Candy Shell, Seidio Active, Seidio Surface equivalent sold at BestBuy, have a Samsung Protective Cover coming, and just today received the Candy Shell Grip.

I like to carry my GS4 in its case in this

vertical holster (with rotating clip). All cases I've tried fit nicely (and comfortably loose in the holster). The Seidio active fit the most snug due to the kickstand. But it was easy to remove from the holster. However, it was too easy to accidentally hit the power button when removing from the holster.

Overall, I'd say the CS Grip fits the best in the holster as it is just slightly larger (due to the grip feature) than my next favorite, the Speck Candy Shell. I really thought I'd like the Seidio Active the best, but that did not turn out as I thought it would.

My complaint about the original Candy Shell case is simply that it was hard to pick up when lying face down. It offers superb protection... as I accidentally discovered when I pulled my brand-new GS4-32Gb out of my back pocket and just as it started to clear my pocket, snagged my pants and pulled it out of my hand. It clattered to the tile floor from waist height and suffered no damage at all. Neither did the case.

Other than the slick back, the original CS case grew on me and became my favorite of the ones I've tested. The CS Grip tops them all. It will take some doing for the incoming Samsung protective cover to displace the Grip from the top of my favorites list.

I don't see much mention of the Speck products here. But I am more than pleased with them. The button action is superb... not too sensitive as they are in the Seidio Active case. Not too hard as they are in the OBDefender case (as evidenced on my former GN2).

The Speck CS Grip case (and the original CS case) all line up perfectly with all openings and have a two part construction that provides a soft inner shell with a nice lip around the glass for face down protection. It does not interfere with my screen protector. It also has a nice feel and is easy to pick up from the face down position on a flat surface.

This is a keeper!

 

[andromatix]

speedlever, my son has a speck for his iphone 4s, he likes it as well....very similar design to yours but in red...

 

[RoadRunnerSS]

This is my Otterbox Defender case. I like it a lot and it has great grip. I like the rubber feel of it. I think I'll be picking up a UAG case too.

 

[tastycaramel]

This is my Otterbox Defender case. I like it a lot and it has great grip. I like the rubber feel of it. I think I'll be picking up a UAG case too.

That's cool actually.

 

[Sierra255]

I just got an orange UAG case and I think it's fantastic so far. The biggest thing I noticed is that I can actually hold on to the phone now. Without a case, I always felt like I was going to drop it because it's so slick.

 

[tastycaramel]

I just got an orange UAG case and I think it's fantastic so far. The biggest thing I noticed is that I can actually hold on to the phone now. Without a case, I always felt like I was going to drop it because it's so slick.

Yea, the back part is kinda slippery too

 

[Lacit1707]

anyone have Spigen Slim Armor?

I just got my phone yesterday, put it in the case and see that its not fitting perfectly. the silver edging of the phone should all be completely hidden once the case goes over the phone.... but the top left corner seems like the case is not going over entirely as i can see a bit of silver...

anyone else have this problem?

 

[tastycaramel]

Try to pull it up or slide it? Maybe the case is not evenly fitted.

 

[Lacit1707]

Try to pull it up or slide it? Maybe the case is not evenly fitted.

yea i did... still isnt fitting perfectly...im hoping that it needs to be broken in..not a big deal either way...just being anal...

anyone have the SpigenGLAS.tR SLIM??

since it covers the light sensors up top, does it affect any of the phones abilities?

 

[tastycaramel]

yea i did... still isnt fitting perfectly...im hoping that it needs to be broken in..not a big deal either way...just being anal...

anyone have the SpigenGLAS.tR SLIM??

since it covers the light sensors up top, does it affect any of the phones abilities?

If it covers the light sensors, the auto brightness is most probably not going to work. And with the case covering sensors, are you sure you have put on the case properly and correctly?

 

[dopejayoh]

anyone have Spigen Slim Armor?

I just got my phone yesterday, put it in the case and see that its not fitting perfectly. the silver edging of the phone should all be completely hidden once the case goes over the phone.... but the top left corner seems like the case is not going over entirely as i can see a bit of silver...

anyone else have this problem?

I had the exact same problem except that the case I received wouldn't snap in at all and one side of the phone was completely uncovered. I had to do a return because of it.

 

[tastycaramel]

I had the exact same problem except that the case I received wouldn't snap in at all and one side of the phone was completely uncovered. I had to do a return because of it.

That's strange. Is it a soft case or a hard shell case?