Root [OUDHS] Clockworkmod Recovery 6.0.1.9

[Shabbypenguin]

use framaroot to root the device and then use rom manager to install recovery for the rush

 

[PsXtreme]

When I clicked on the files it would take me to a 404 file not found page and play some annoying music. I figured out, dont click on the file and it will pop up the download box after I wait a sec for it to load.

 

[Shabbypenguin]

took me a while, but i understand why there is some confusion. when i port recoveries rather than using my work as a base things get left out. https://github.com/koush/ROMManager...18#diff-6c9a6acf22f90d1c6e524d9f3c5c1745R2690

"name": "Samsung Prevail 2 (Boost Mobile)",

this was done 9 months ago, so at any point in rom manager until this is fixed, pick prevail 2 boost mobile.

 

[LormarTX]

Whenever I try to partition my SD card, I get the message

checking script requirements...
err: you are not using parted v1.8.8.1.179-aef3!

 

[swisser]

Is the root still working because I keep getting an error in Odin. I tried all ports same thing. I unchecked auto boot and f.reset time. still the same. Odin shows my COM in blue this one has me stumped on why it not working. This is what I'm getting...


<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

I don't know what's going on this has me beat

 

[LormarTX]

Is the root still working because I keep getting an error in Odin. I tried all ports same thing. I unchecked auto boot and f.reset time. still the same. Odin shows my COM in blue this one has me stumped on why it not working. This is what I'm getting...


<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

I don't know what's going on this has me beat

Do you have Kies installed? If so, you need to go into task manager and kill every process related to it... also, you may have to re-download the tarball as usually when that problem happens, it's because of an incomplete file.

You should also make sure you're running 3.40 or 3.70 of ODIN3

 

[swisser]

Yes I have kies, because for some reason I could get the usb drivers to install without it. Also, i downloaded the odin from the link in OP, I think its Odin3 3.04 Ok cool thanks I will try it this evening.

 

[swisser]

It's still not working Odin v 3.04 gives the same error as above and v 3.07 just hangs at <ID:0/004> recovery.img.

 

[swisser]

Thanks Slayer, but I figured it out yesterday. I had a bad USB cable, I'm rooted now thanks again, and Thanks to Shabby and his team I will by you that coke!

 

[kalynn1015]

Well I got CWM (the first one) to work on Odin 3.04 , but the SuperSU-v0.98+.zip tells me I have an invalid signiture.

Can I get some help?

I still seem to be having the same issue, but i got something done cuz I now have a yellow warning triangle each time i power up my phone and it my phone will no longer take the remote refresh codes from my mobile carrier. eek i think i may have messed this up HELP PLEASE

 

[Tesla5]

Yellow triangle is normal after installing cwm. No worries.

 

[DaisFlaque]

Triangle away? There's an application called triangle away I use on my s3 that resets the flash count. And obviously the name implies....

 

[raymealer]

Triangle away? There's an application called triangle away I use on my s3 that resets the flash count. And obviously the name implies....

That's not true I flash the phone brand new out of the box and got the yellow triangle if we can't get him to add the Galaxy rush support to the triangle away maybe we can find someone they can modify it for us when the phones had ice cream sandwich on them I use the poot exploit to root them and flash clockworkmod with rom manager and never got the yellow triangle

 

[kskillz]

That's not true I flash the phone brand new out of the box and got the yellow triangle if we can't get him to add the Galaxy rush support to the triangle away maybe we can find someone they can modify it for us when the phones had ice cream sandwich on them I use the poot exploit to root them and flash clockworkmod with rom manager and never got the yellow triangle

I also only flashed once out of box....I too have the triangle

 

[Lordvincent 90]

I also only flashed once out of box....I too have the triangle

The only way to prevent the yellow triangle that I'm aware of is to enter downloading mode with

adb reboot bootloader

before you use Odin

(this will not remove the triangle... It just prevents it from appearing)

 

[kskillz]

The only way to prevent the yellow triangle that I'm aware of is to enter downloading mode with

adb reboot bootloader

before you use Odin

(this will not remove the triangle... It just prevents it from appearing)

Ah ok....I wish I knew that beforehand...

 

[Lordvincent 90]

Ah ok....I wish I knew that beforehand...

me too... Lol, I found it out when i "fixed" a friends rush and was too lazy to do the button combo

 

[kskillz]

me too... Lol, I found it out when i "fixed" a friends rush and was too lazy to do the button combo

Lmao...at least the new ppl will know long as they read first

 

[Tesla5]

The only way to prevent the yellow triangle that I'm aware of is to enter downloading mode with

adb reboot bootloader

before you use Odin

(this will not remove the triangle... It just prevents it from appearing)

So this won't work if the triangle already appears? Only good for new phones?

 

[Lordvincent 90]

So this won't work if the triangle already appears? Only good for new phones?

Yep

 

[Gokaired69]

Followed the steps to the letter. Odin detected the phone and all. Unchecked everything, flash went successfully. BUT!! Not only would it NOT boot into CWM, when it fully booted back up, my SD card was WRECKED. The phone reads it as blank or unsupported, yet AppInstaller shows the apps on there just fine...

 

[SoulSmash3r]

I installed Rom Manager, then when It asked if I wanted to install CWM, I installed the CWM for the Galaxy Prevail 2, then I from the Rom Manager app I clicked reboot into recovery and I was able to get into CWM.

PS: I did all this after I don't know how many tries to flash with ODIN and it saying Success but unable to get manually into recovery. I don't know if I was just lucky with the process that I described above but hey it worked for me now I can get into CWM manually or with the power menu.

 

[Pescadore]

I've tried, redownloaded everything and tried again, but can't get this to work. When I install the SuperUser.zip (Superuser-1.0.1.1.zip) in step 7, I get an error, "signature verification failed", and my phone does not get rooted. What am I missing?

 

[Lordvincent 90]

I've tried, redownloaded everything and tried again, but can't get this to work. When I install the SuperUser.zip (Superuser-1.0.1.1.zip) in step 7, I get an error, "signature verification failed", and my phone does not get rooted. What am I missing?

If you got signature verification failed then you probably still have the stock recovery.
If the phone boots fully after flashing cwm, before flashing the su.zip, then cwm will get overwritten with the stock recovery.

You need to flash cwm with Odin
pull the battery
boot directly into cwm
Flash the superuser.zip
And select reboot system now

It should prompt you to disable recovery flash. Select yes.

 

[sfelsted]

Hi, I was finally able to get ODIN to run, see my phone, and install Clockwork recovery on my Boost Mobile Galaxy Rush phone. The phone boots up with the orange triangle.

When I get to the following steps:

6) Choose install zip from sdcard, then pick internal or external (where you copied it to)
7) Scroll down to the Superuser.zip and select it to install

I do not have the "install zip from sdcard" option. Any ideas?